Western Digital Ultrastar Data102 User manual
EcoDesign
Disclosures
Ultrastar® Data102
Regulatory Model: H4102-J
1ET2152
Version 1.0
February 2020
EcoDesign Disclosures Table of Contents
Table of Contents
Notices........................................................................................................................................................................................ ii
Chapter 1. EU EcoDesign Disclosures............................................................................................................................................ 1
EcoDesign Overview................................................................................................................................................................. 2
Ultrastar Data102 EcoDesign Specifications............................................................................................................................ 2
Instant Secure Erase / Secure Erase........................................................................................................................................2
Ultrastar Data102 Disassembly.................................................................................................................................................. 5
i
EcoDesign Disclosures Notices
Notices
Western Digital Technologies, Inc. or its affiliates' (collectively “Western Digital”) general policy does not
recommend the use of its products in life support applications wherein a failure or malfunction of the product
may directly threaten life or injury. Per Western Digital Terms and Conditions of Sale, the user of Western
Digital products in life support applications assumes all risk of such use and indemnifies Western Digital
against all damages.
This document is for information use only and is subject to change without prior notice. Western Digital
assumes no responsibility for any errors that may appear in this document, nor for incidental or consequential
damages resulting from the furnishing, performance or use of this material.
Absent a written agreement signed by Western Digital or its authorized representative to the contrary,
Western Digital explicitly disclaims any express and implied warranties and indemnities of any kind that may,
or could, be associated with this document and related material, and any user of this document or related
material agrees to such disclaimer as a precondition to receipt and usage hereof.
Each user of this document or any product referred to herein expressly waives all guaranties and warranties
of any kind associated with this document any related materials or such product, whether expressed or
implied, including without limitation, any implied warranty of merchantability or fitness for a particular
purpose or non-infringement. Each user of this document or any product referred to herein also expressly
agrees Western Digital shall not be liable for any incidental, punitive, indirect, special, or consequential
damages, including without limitation physical injury or death, property damage, lost data, loss of profits or
costs of procurement of substitute goods, technology, or services, arising out of or related to this document,
any related materials or any product referred to herein, regardless of whether such damages are based on
tort, warranty, contract, or any other legal theory, even if advised of the possibility of such damages.
This document and its contents, including diagrams, schematics, methodology, work product, and
intellectual property rights described in, associated with, or implied by this document, are the sole and
exclusive property of Western Digital. No intellectual property license, express or implied, is granted by
Western Digital associated with the document recipient's receipt, access and/or use of this document or the
products referred to herein; Western Digital retains all rights hereto.
Western Digital, the Western Digital logo, and Ultrastar are registered trademarks or trademarks of Western
Digital Corporation or its affiliates in the US and/or other countries. Linux® is the registered trademark of
Linus Torvalds in the U.S. and other countries. All other marks are the property of their respective owners.
Product specifications subject to change without notice. Pictures shown may vary from actual products. Not
all products are available in all regions of the world.
Western Digital
5601 Great Oaks Parkway
San Jose, CA 95119
© 2020 Western Digital Corporation or its affiliates. All Rights Reserved.
ii
Western Digital
EU EcoDesign
Disclosures
This document provides information and instructions related
to the Ultrastar Data102 's disclosures for the EU's ecodesign
requirements.
In This Chapter:
- EcoDesign Overview......................................2
- Ultrastar Data102 EcoDesign
Specifications...................................................2
- Instant Secure Erase / Secure Erase............ 2
- Ultrastar Data102 Disassembly......................5
1
EcoDesign Disclosures 1. EU EcoDesign Disclosures
1.1 EcoDesign Overview
1.1 EcoDesign Overview
This document provides information about the Ultrastar Data102 related to its manufacturing and operation,
and instructions for secure data deletion and disassembly.
1.2 Ultrastar Data102 EcoDesign Specifications
Product Type Onilne Data Storage Product
Manufacturer's Name Western Digital
Manufacturer's Registered Trade Name Western Digital®
Manufacturer's Registered Trade Address 5601 Great Oaks Parkway
San Jose, CA 95119
USA
Product Model Number H4102-J
Starting Year of Manufacture 2018 *
PSU efficiency at 20%, 50%, 100%
of rated output power
20% load = 90%
50% load = 94%
100% load = 91%
Power Factor at 50% Rated Load Level Minimum Power Factor = 0.95
Declared Operating Condition Class A2
Neodymium Content in HDDs 5g to 25g
(for drive models HC310, HC320,
HC510, HC520, and HC530)
Cobalt Content in Batteries N/A
1.3 Instant Secure Erase / Secure Erase
This section provides conceptual information and instructions for using the Instant Secure Erase (ISE) or
Secure Erase (SE) features included with Western Digital drives.
Data Erasure Options
Western Digital provides several options for securely erasing data from its drives. The appropriate method
depends upon many factors, including the following:
•Erase Configuration (ISE or SE)
•Drive Type (HDD or SSD)
•Interface Type (SAS, SATA, or NVMe™)
•Encryption (none, TCG, or FIPS)
* This value is the original date of product manufacture. For the specific manufacture date of your platform, check the
agency label attached to the platform. There will be a 4 digit date code on that label.
2
EcoDesign Disclosures 1. EU EcoDesign Disclosures
1.3 Instant Secure Erase / Secure Erase
For more information on the sanitize command for specific drive models, please see the drive model's
specification, contact Western Digital technical support, or download the following whitepaper for details:
https://documents.westerndigital.com/content/dam/doc-library/en_us/assets/public/western-digital/
collateral/tech-brief/tech-brief-instant-secure-erase....
ISE / SE Overview
Instant Secure Erase (ISE) is Western Digital’s implementation of the industry standard T10 (SAS)/T13 (SATA)
sanitize command, allowing users to instantly erase both user-accesible data and hidden user data from
Western Digital drives.
The sanitize command supports three options:
1. Crypto Scramble (SATA) / Crypto Erase (SAS): deletes the encryption key of a self-encrypting drive.
2. Overwrite (HDDs): overwrites the data on the drive with a supplied value.
3. Block Erase (SSDs): electrically erases each storage element by modifying their voltage levels.
Secure Erase (SE) is a subset of ISE, where the Crypto Scramble / Erase option has been disabled, allowing
only the Overwrite or Block Erase options.
Requirements
To perform secure deletion, the following versions are the minimal recommended/supported utilities for
each drive interface required on the host. For other versions, please verify the arguments/parameters in the
appropriate man pages.
•SAS: sg_sanitize version 1.00 20151219 (included in sg3_utils 1.42 *)
•SATA: hdparm version 9.58
•NVMe: nvme-cli version 1.6
Erase Methods
The following methods cover all erasure options and storage technologies for WesternDigital drives.
For more information on the sanitize command for specific drive models, please see the drive model's
specification.
Note: If a RAID adapter or software is in use, remove the drives from a RAID set before erasure.
Note: If a drive is encrypted (TCG or FIPS), unlock the drive before executing any sanitize
commands.
Note: In the following commands, replace the generic reference of <dev> with the specific
device reference appropriate for your operating system (i.e. sgX for Linux, SCSIX:X,X,X for
Windows).
SAS
Note: In the following sg_sanitize commands, the --quick option starts the deletion
immediately. If the --quick option is not specified, the drive's inquiry response strings are
printed in case the wrong device has been specified, and the user is given 15 seconds to
reconsider whether they wish to erase all the data on the drive.
* For details on how to use the sg3_utils v1.42 utility, visit http://sg.danny.cz/
3
EcoDesign Disclosures 1. EU EcoDesign Disclosures
1.3 Instant Secure Erase / Secure Erase
•ISE - Crypto Erase - HDD/SSD:
# sg_sanitize --crypto --quick <dev>
•SE - Overwrite - HDD:
# sg_sanitize --overwrite --quick --zero <dev>
•Block Erase - SSD:
# sg_sanitize --block --quick <dev>
SATA
•ISE - Crypto Erase - HDD/SSD:
# hdparm --yes-i-know-what-i-am-doing --sanitize-crypto-scramble <dev>
•SE - Overwrite - HDD:
# hdparm --yes-i-know-what-i-am-doing --sanitize-overwrite hex:11111111 <dev>
•Block Erase SSD:
# hdparm --yes-i-know-what-i-am-doing --sanitize-block-erase <dev>
NVMe
•# nvme format –s <option> /dev/<nvme_namespace>
Note: The -s option triggers Secure Erase mode.
Value Definition
0 No secure erase operation requested
1 User Data Erase: All user data shall be erased, contents of the
user data after the erase is indeterminate (e.g., the user data
may be zero filled, one filled, etc). The controller may
perform a cryptographic erase when a User Data Erase is
requested if all user data is encrypted.
2 Cryptographic Erase: All user data shall be erased
cryptographically. This is accomplished by deleting the
encryption key.
4
EcoDesign Disclosures 1. EU EcoDesign Disclosures
1.4 Ultrastar Data102 Disassembly
1.4 Ultrastar Data102 Disassembly
This task provides instructions for disassembling an Ultrastar Data102 .
Table 1: Procedure Requirements
Required Tools # of People Required Time
Required
T7, T8, & T10 Torx Screwdrivers
#2 Phillips Screwdriver
Two * 2 hours
Opening the CMA(s)
Step 1 : Place the CMA(s) into service position.
a. Unlatch the CMA(s) from the rail at the elbow connector by pressing the blue release
button.
Figure 1: Unlatching a CMA Connector
b. Swing the CMA(s) away from the enclosure.
c. The arm(s) should be extended away from the enclosure as shown in the following
example.
* Two people required for lifting enclosure; only 1 required for disassembly
5
EcoDesign Disclosures 1. EU EcoDesign Disclosures
1.4 Ultrastar Data102 Disassembly
Figure 2: CMA(s) in service position (Cables not shown)
Powering Down the Enclosure
Step 2 : Disconnect the Enclosure from power.
a. Locate the redundant PSUs at the rear of the enclosure.
b. Detach the cable retention clip from both power cords.
Figure 3: Cable Retention Mechanism
c. Power down the enclosure by disconnecting both power cables, one from each PSU.
Removing the Cables
6
EcoDesign Disclosures 1. EU EcoDesign Disclosures
1.4 Ultrastar Data102 Disassembly
Step 3 : Disconnect the HD Mini-SAS cables from the rear of the enclosure by pulling (don't jerk) on the
blue tab that is extending outward from the connector. This will free the cable from the port.
Make sure each cable is labeled or label them yourself to ensure that they will be plugged back
into the same location.
Step 4 : Unplug the Ethernet cables from the out-of-band management ports.
Step 5 : Uncable the CMA(s).
a. Open all of the basket clips on the CMA(s).
Figure 4: Open Baskets
b. Remove one cable at a time from the arm, making sure not to put too much strain on the
arm.
Removing the CMA(s)
Step 6 : Remove the CMA(s).
a. Release all of the connectors that attach the CMA(s) to the enclosure and the rail.
There are three total connections that need to be released, one at the elbow and two
at the opposite end.
b. To release a connector, press the blue latch release button and pull the connector free.
7
Other manuals for Ultrastar Data102
5
This manual suits for next models
2
Table of contents
Other Western Digital Storage manuals
Western Digital
Western Digital My Cloud User manual
Western Digital
Western Digital WD Passport Pocket Drive User manual
Western Digital
Western Digital WD1600BEKT - Scorpio 160 GB Hard Drive Installation instructions
Western Digital
Western Digital ELEMENTS WDE1U5000E User manual
Western Digital
Western Digital WDBACX0010Bxx - My Passport Essential SE User manual
Western Digital
Western Digital My Cloud User manual
Western Digital
Western Digital My Cloud EX4100 User manual
Western Digital
Western Digital My Book WDH1U10000 User manual
Western Digital
Western Digital Scorpio Black WD1600BJKT Operation manual
Western Digital
Western Digital WDG2NC10000 - My Book World Edition II User manual
Western Digital
Western Digital WD10EZRZ User manual
Western Digital
Western Digital Caviar Series Operating and maintenance instructions
Western Digital
Western Digital WDBAAU0010HBK - Elements Desktop User manual
Western Digital
Western Digital WDBAAA2500Axx - My Passport Essential User manual
Western Digital
Western Digital WD1200JB - Caviar 120 GB Hard Drive User manual
Western Digital
Western Digital My Book Studio User manual
Western Digital
Western Digital WD1600AVBB User manual
Western Digital
Western Digital Ultrastar Data60 User manual
Western Digital
Western Digital WDBAAH0015HCH - My Book Elite User manual
Western Digital
Western Digital WDBACH0020HAL - My Book Studio LX User manual
Western Digital
Western Digital WDG2TP10000N - My Book Pro Edition II Hard Drive... User manual
Western Digital
Western Digital WDH2U20000 - My Book Mirror Edition Hard Drive... User manual
Western Digital
Western Digital WDBGCH0010BSL User manual
Western Digital
Western Digital WD5000AVDS Operation manual
