Weinmann ULM CASE User manual
ULM CASE I / VALISE ULM I
Emergency Case / Valise d'urgence
Instructions for use /
Mode d'emploi
English 3
Français 20
EN 3
Contents
1 Overview ........................................................................ 4
1.1 Special markings on the device .................................. 5
2 Device Description ......................................................... 6
2.1 Intended purpose ...................................................... 6
2.2 Functional description................................................ 6
3 Safety Instructions ......................................................... 7
4 Assembly......................................................................... 8
4.1 Assembly of wall mounting ....................................... 8
5 Operation........................................................................ 9
5.1 Space Dividers ........................................................... 9
5.2 Tube Holders ............................................................. 9
5.3 Ampoule Holders....................................................... 9
5.4 Inserting Oxygen Cylinders ...................................... 10
5.5 MEDUMAT Holder .................................................. 10
5.6 OMNIVAC holder .................................................... 11
6 Hygiene preparation.................................................... 11
7 Functional Test.............................................................. 12
8 Maintenance................................................................. 12
8.1 Intervals................................................................... 12
8.2 Sending in parts ...................................................... 13
8.3 Disposal................................................................... 13
9 Supply Schedule ........................................................... 14
9.1 Standard Supply Schedule ....................................... 14
9.2 Accessories.............................................................. 14
9.3 Replacement Parts ................................................... 15
10 TechnicalSpecications ............................................... 17
11 Warranty ....................................................................... 18
4EN Overview
Legend
1 Magnetic closing
2 Cover
3 Case top
4 Upper insert
5 Short (121mm) bottom divider
6 Retaining clamp
7 Oxygen cylinder compartment
8 Lower insert
9 Case bottom
10 Case lock
11 Case handle
12 Long (211mm) bottom divider
1 Overview
13 Lead seal
14 Medium (147 mm) bottom divider
15 Tube holder:
a) Oropharyngeal tubes, large
b) Oropharyngeal tubes, small
16 Keys
17
Set of two belts for oxygen cylinder
18 Laryngoscope bag
19
Ampoule holder 200 mm (10 places for ampoules)
20
Ampoule holder 260 mm (13 places for ampoules)
21 Ampoularium
22 MEDUMAT holder
23 OMNIVAC holder
1
2
3
4
5
6
7
8
13
10
11
12
9
14
ab
16
17
18
19
20
21
22
23
15
Overview EN 5
1.1 Special markings on the device
No. Symbol Meaning
Device ID plate ULM CASE I
1Follow instructions for use.
Other markings
2Removing the bars
2
1
6EN Device Description
2 Device Description
2.1 Intended purpose
ULM CASE I is used to hold and transport emergency
medical devices, instruments, medicines, bandages and
other parts.
2.2 Functional description
ULM CASE I has been perfectly equipped for each time
of use. The interior of the case bottom can be set up
with dividers to t your specic needs. Accessories, such
as ampoule holders, tube holders and belts for oxygen
cylinders provide further customization potential.
ULM CASE I can also be equipped with individual holders
for the ventilation device MEDUMAT and the OMNIVAC
suction system.
Safety Instructions EN 7
3 Safety Instructions
Please note the following for your own safety and that of
your patients:
• Please follow the instructions in this User’s Manual.
They are a part of the case and therefore must be
available at all times.
• Prerequisites for use of this case include thorough
knowledge and observation of this User’s Manual.
• The case is intended only for the described purpose.
• If third-party items are used, functional failures may
occur and tness for use may be restricted. Please
note that in such cases, any claim under warranty
and liability will be voided if neither the accessories
nor genuine replacement parts recommended in the
instructions for use are used.
• Be sure that spilled liquids (for example, from ampoules)
are cleaned up immediately. Observe the warning and
disposal regulations of the manufacturers involved.
• To prevent infection or bacterial contamination, ob-
serve the instructions in Section “6 Hygiene prepara-
tion” on page 11.
• If the case is equipped with oxygen cylinders and
other devices, be sure to observe the accompanying
User’s Manuals and special instructions.
• Protect the oxygen cylinders from accidents.
• Keep the devices free from oil and grease.
• Make sure you wash your hands before handling
oxygen cylinders.
• When assembling the parts and when changing cylinders,
turn all screws by hand. Do not in any event use tools.
• Always open the cylinder valve slowly.
• Smoking and open ames are strictly forbidden in the
vicinity of oxygen-related equipment.
• Make sure you always have adequately lled oxygen
cylinders. It is recommended that you keep a full
oxygen cylinder in reserve.
8EN Assembly
4 Assembly
4.1 Assembly of wall mounting
If you would like to mount the case on the wall of a
vehicle, use wall mounting WM 15370 (see Section “9
Supply Schedule” on page 14).
If you would like to mount the case on the wall of a buil-
ding, use the appropriate wall mounting WM 15731 (see
Section “9 Supply Schedule” on page 14).
1. Mark the spots for the holes on the surface where
you want to fasten the case.
You can use the wall mounting as a stencil.
2. Drill the holes:
– in vehicles: with a drill bit of 3mm in diameter
– in buildings: with an appropriate bit for the requi-
red dowel.
3. Screw the wall mounting tightly into place.
Wall mounting WM 15370
Wall mounting WM 15371
Operation EN 9
5 Operation
5.1 Space Dividers
The interior of the case bottom can be separated as desi-
red with the space dividers (5, 12 and 14). See Illustration
1, Device Overview, for an example.
Observe the following when using the dividers:
• proper positioning as illustrated
• right-angle placement in the opposing grooves
• correct clicking-in of the snap elements
To remove a divider, press both circular snap elements
together (as shown) and lift the divider.
5.2 Tube Holders
The manufacturer has supplied tube holders 15 a) and
15 b) as sets with the fastening elements. You can fasten
the tube holders to any divider in the case bottom (see
illustration).
5.3 Ampoule Holders
The ampoule holders (19 and 20), delivered as a set with
the fastening elements or as replacement parts, can be
attached (as shown) to the desired spot on the inside of
the cover (2)).
Important!
Make sure that when you close the cover, no am-
poules are crushed by a divider or other equipment.
WEINMANN : HAMBURG
WEINMANN : HAMBURG
10 EN Operation
5.4 Inserting Oxygen Cylinders
Be sure to wash your hands before you insert or change
oxygen cylinders.
If you want to fasten an oxygen cylinder of 0.8 liters or
2.0 liters into the case bottom
(9), use accessory WM 15141, Set of two belts for
oxygen cylinders (17). Fasten the oxygen cylinder in the
oxygen cylinder compartment (7) as shown in the illustra-
tion. To fasten a 2.0-liter oxygen cylinder, use the outer
clamp (6) on the oor of the case. If you want to fasten
an 0.8-liter cylinder, use the middle and left clamps. Be
sure that you pull the belts tightly during assembly in
order to prevent the cylinders from slipping out of place.
5.5 MEDUMAT Holder
To fasten a MEDUMAT ventilation device into the case
bottom, use the holder for MEDUMAT (22). Click the ME-
DUMAT holder into place in the case bottom as shown
in the illustration. Then place the MEDUMAT so that the
lower grid on the device catches in the gap in the holder.
Press the MEDUMAT up into the holder until you hear it
click into place.
Important!
Your hands must be free
of grease and products
containing alcohol when
you insert or change
oxygen cylinders. Fire
hazard!
WEINMANN : HAMBURG
WEINMANN : HAMBURG
Table of contents
Languages:
Other Weinmann Medical Equipment manuals
Weinmann
Weinmann JOYCE SilkGel vented User manual
Weinmann
Weinmann MEDUVENT Standard User manual
Weinmann
Weinmann VENTImotion Series Operating instructions
Weinmann
Weinmann MEDUMAT Standard2 User manual
Weinmann
Weinmann MEDUVENT Standard User manual
Weinmann
Weinmann homecare SOMNOvent auto-S Application guide
Weinmann
Weinmann LIFE-BASE light XS User manual
Weinmann
Weinmann MEDUMAT Standard2 User manual
Weinmann
Weinmann homecare SOMNOcomfort 2 Setup guide
Weinmann
Weinmann ACCUVAC Basic Manual
Weinmann
Weinmann BiLevel ST 22 User manual
Weinmann
Weinmann SOMNOsmart 2 User manual
Weinmann
Weinmann JOYCEeasy User manual
Weinmann
Weinmann VENTIlogic BiLevel ST Operating instructions
Weinmann
Weinmann ULM CASE Circulation Technical Document
Weinmann
Weinmann MEDUMAT EasyCPR User manual
Weinmann
Weinmann PARAMEDIC BOX User manual
Weinmann
Weinmann LIFE-BASE Series User manual
Weinmann
Weinmann MEDUMAT Standard2 User manual
Weinmann
Weinmann COMBIBAG WM 11000 Manual
