Waxess DM100HS User manual
DM100HS/DMS100HS
Accessory Handset
User Guide
handset user guide final.book Page 1 Monday, May 30, 2005 8:59 PM
DM100HS/DMS100HS 2 Copyright © 2005 Waxess
1 Antenna
2 Beltclip Hole
3 Speaker for Ringer
4 Handset Battery Compartment
5 New Message LED
6 Handset Earpiece
7 LCD Display
8 Function keys
9 Up/Down keys
10 Menu and OFF keys
11 !* scroll left
12 Flash/Delete key
13 Redial/Pause key
14 Headset jack
15 # " scroll right
16 Intercom
17 Handset Microphone
18 Handset Charging Contacts
handset user guide final.book Page 2 Monday, May 30, 2005 8:59 PM
DM100HS/DMS100HS 3 Copyright © 2005 Waxess
Introduction
Congratulations on your purchase of the Waxess Dual Mode
Communications Terminal DM100HS/DMS100HS optional
handset and charging cradle. This additional handset is for use
with the Dual Mode Communication Terminal, DM1000/DMS1000.
Each model within this series will support up to four handsets. You
can place a fully featured cordless handset anywhere in your
home as long as AC power is available for the handset charging
cradle.
Note:This additional handset will not operate unless it has been
registered to the base unit.
This user guide describes how to set up and connect your new
handset; for instructions on operating your new handset, refer to
the user guide supplied with your base unit.
• INCLUDED ITEMS
• CONTACT INFORMATION
http://www.waxess.com
Waxess, Inc.
34 Executive Park, Suite 250
Irvine, California 92614
• Cordless Handset
• AC Adaptor
(Model number RGD4109500)
• Charging Cradle
• Rechargeable Battery
Ni-Cd, 3.6V, 1000mA
• Belt Clip
• User Guide
handset user guide final.book Page 3 Monday, May 30, 2005 8:59 PM
DM100HS/DMS100HS 4 Copyright © 2005 Waxess
1 Get ready
• INSTALL THE BATTERY
1Open the cover.
2Verify that the
connector is properly
aligned with the jack
and connect the
battery.
Note:The connector is
designed to easily fit
the jack in only one
direction. Do not
use excessive force.
3Close the cover.
• CHARGE THE BATTERY
1Connect the AC adaptor to the
DC 9V IN jack on the charging
cradle and to a standard 120V
AC wall outlet.
2Set the charging cradle on a
desk or table, then set the
handset in the cradle with the
keypad facing forward.
Note:Use only the AC Adaptor supplied with the handset in this
package. Do not use any other AC Adpator.
Charge the battery frequently. Leaving the battery
uncharged for a prolonged period can adversely affect
battery charging capacity. If this happens, replace the
battery.
handset user guide final.book Page 4 Monday, May 30, 2005 8:59 PM
DM100HS/DMS100HS 5 Copyright © 2005 Waxess
3Allow the battery to charge for 12–15 hours.
A power indicator in the upper right
corner of the LCD shows how much
battery life remains.
Full charge
Low charge
2 Get set
• REGISTER
Note:Verify that you are near the DM 1000 series base
(purchased separately).
1On the Handset, press MENU, scroll to Setup and press Select.
2Scroll to Register and press Select.
The display shows “Press and hold Intercom on base, then OK.”
3Press and hold Intercom (at least two seconds) on the Base until
you hear a beep.
4Then, press OK on the Handset.
Registration takes only a few
seconds and when complete, you
hear a tone and this message
appears on the LCD screen.
After a few minutes, time and date
automatically synchronizes with the
existing base and handsets. Or, see the user guide included
with your base unit to set time and date manually.
handset user guide final.book Page 5 Monday, May 30, 2005 8:59 PM
DM100HS/DMS100HS 6 Copyright © 2005 Waxess
• DEREGISTER
If you need to deregister the handset from the base, follow these
steps:
1Press MENU, scroll to Setup and press Select.
2Scroll to Deregister and press Select.
A list of registered Cordless Handsets appears.
Scroll to the Handset you want to deregister and press Select.
OR
Press Exit to return to the previous screen without
deregistering.
The confirmation message “Delete registration?” appears.
3Press Yes to confirm.
Or
Press No to return to the previous screen.
When deregistration is complete, the confirmation message
“Handset 1 is deregistered” appears.
3 GO!
Now that your new handset is registered, it can perform all the
same functions as the handsets originally included with your
phone. With your new handset, you can
• Transfer calls between handsets
• Use two handsets as walkie-talkies with the intercom feature
• Use all handsets to hold a conference call
...and much more. See the user guide that came with your base
unit for complete instructions on operating your new expanded
digital phone.
4 I.C. Notice
TERMINAL EQUIPMENT
Notice:This equipment meets the applicable Industry Canada
Terminal Equipment Technical Specifications. This is
confirmed by the registration number. The abbreviation,
IC, before the registration number signifies that
registration was performed based on a Declaration of
Conformity indicating that Industry Canada technical
specifications were met. It does not imply that Industry
Canada approved the equipment.
Notice:The Ringer Equivalence Number (REN) for this terminal
equipment is marked on the equipment itself. The REN
assigned to each terminal equipment provides an
indication of the maximum number of terminals allowed
handset user guide final.book Page 6 Monday, May 30, 2005 8:59 PM
DM100HS/DMS100HS 7 Copyright © 2005 Waxess
to be connected to a telephone interface. The termination
on an interface may consist of any combination of devices
subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not
exceed five.
RADIO EQUIPMENT
The term "IC" before the radio certification number only signifies
that Industry Canada technical specifications were met.
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device. “Privacy of communications
may not be ensured when using this telephone.”
5 Specifications
Standby Battery Time 5 days
Talk Time 7–8 hours
Page Any Key Cancel Yes
Phone book
Phone Number
Name
Sorting
Distinctive Ring
50
24 digit
16 characters
Alphabetical order
Yes
Speed Dial 10 (0-9)
Caller ID Memory
Phone Number
Name
Sorting
50
16 digits
16 characters
Historical
Redial Memory
Redial Digits
5
32
Ringer Tone 3 Ringers and 3 Melodies
Ringer Volume 4 Steps (Off/Low/Mid/High)
Ear Speaker Volume 4 Steps (Low/Mid/High/Max)
Hearing Aid Compatible For New FCC (Low/Mid/High/Max)
Pulse Dial 10 PPS
Tone Dial 100 msec, continuous
Chain Dialing Yes
Language English/Spanish/French/Portuguese
New Message LED VMWI, Red
LCD Backlight Yes, Orange
Key Blacklight Yes, Orange
Software Function Keys Yes, S1 & S2, Green
Headset Jack Yes
handset user guide final.book Page 7 Monday, May 30, 2005 8:59 PM
Copyright © 2005 Waxess
Thank you for buying a Waxess product!
HD1000USA00
handset user guide final.book Page 8 Monday, May 30, 2005 8:59 PM
This manual suits for next models
1
Table of contents
Other Waxess Handset manuals
