Waters 717plus User manual
Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra
Waters 717plus Autosampler
Operator’s Manual
34 Maple Street
Milford, MA 01757
173-02TP, Revision 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
NOTICE
The information in this document is subject to change without notice and should not be
construed as a commitment by Waters Corporation. Waters Corporation assumes no
responsibility for any errors that may appear in this document. This manual is believed to
be complete and accurate at the time of publication. In no event shall Waters Corporation
be liable for incidental or consequential damages in connection with or arising from the
use of this manual.
1993 WATERS CORPORATION. PRINTED IN THE UNITED STATES OF AMERICA.
ALL RIGHTS RESERVED. THIS BOOK OR PARTS THEREOF MAY NOT BE
REPRODUCED IN ANY FORM WITHOUT THE WRITTEN PERMISSION OF THE
PUBLISHER.
LAC/E, PowerLine, and Waters are trademarks of Waters Corporation.
Millex is a trademark of Millipore Corporation.
Torx is a trademark of Camcar, Division of Textron, Inc.
The quality management systems of Waters manufacturing facilities comply with
the International Organization for Standardization International Standard ISO 9001
Quality Management and Quality Assurance Standards. Waters quality
management systems are periodically audited by the registering body to ensure
compliance.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Attention:
The Waters 717plus Autosampler may be used for IN VITRO diagnostic
applications. This is a highly sensitive instrument. Read the accompanying operator's
manual before using.
When using the instrument, follow generally accepted procedures for quality control and
methods development.
If you observe a change in the retention of a particular compound, in the resolution
between two compounds, or in peak shape, immediately take steps to determine the
reason for the changes. Until you determine the cause of a change, do not rely upon the
results of the separations.
Attention:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Attention:
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.This equipment generates, uses, and can radiate radio
frequency energy, and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.Operation of this equipment in a
residential area is likely to cause harmful interference, in which case you must correct the
interference at your own expense.
Shielded cables must be used with this unit to ensure compliance with the Class A FCC
limits.
Caution:
For continued protection against fire hazard, replace fuses with those of the
same type and rating.
Caution:
To avoid the possibility of electric shock, do not remove the power supply covers.
The power supply does not contain user-serviceable components.
Attention:
To meet the regulatory requirements of immunity from external electrical
disturbances that may affect the performance of this instrument, do not use cables longer
than 9.8 feet (3 meters) when you make connections to the screw-type barrier terminal
strips. In addition, ensure you always connect the shield of the cable to chassis ground at
one instrument only.
The Installation Category (Overvoltage Category) for this instrument is Level II.The Level
II category pertains to equipment that receives its electrical power from a local level, such
as an electrical wall outlet.
STOP
STOP
STOP
STOP
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Canadian Emissions Notice
This digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus set forth in the Radio Interference
Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la classe A
prescrites dans les règlements sur le brouillage radioélectrique édictés par le
Ministère des Communications du Canada.
Symbols Used on 717plus Autosampler
Direct current
Alternating current
Protective conductor
terminal
Frame or chassis terminal
Caution, risk of electric
shock (high voltage)
Caution or refer to
manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table of Contents 5
How to Use This Manual................................................................... 15
Chapter 1
Introduction ...................................................................................... 18
1.1 Description............................................................................ 18
1.2 Features................................................................................ 19
1.3 Components and Subsystems.............................................. 21
Chapter 2
Installation ....................................................................................... 23
2.1 Site Requirements ................................................................ 23
2.2 Unpacking and Inspection..................................................... 25
2.3 Changing Voltage Configuration ........................................... 26
2.4 Connecting Fluid and Drain Lines ........................................ 29
2.5 Connecting Communication Cables ..................................... 32
2.5.1 Making Terminal Strip Connections........................... 33
2.5.2 Making IEEE-488 Network Connections.................... 39
2.5.3 Connecting RS-232 Output to Data Module.............. 40
2.6 Changing the Hardware Configuration.................................. 41
2.6.1 Removing/Replacing the 717plus Cover.................... 41
2.6.2 Installing the Heater/Cooler....................................... 44
Table of Contents
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
6 Table of Contents
2.6.3 Installing the Large Sample Loop.............................. 47
Chapter 3
Startup and Configuration ................................................................ 50
3.1 Powering Up the Autosampler............................................... 50
3.2 Using the Front Panel ........................................................... 51
3.2.1 Accessing Menus....................................................... 52
3.2.2 Entering Operating Parameters................................. 54
3.3 Flushing the Autosampler ..................................................... 54
3.4 Calibrating the Seal Pak........................................................ 54
3.4.1 Purging the Autosampler........................................... 55
3.4.2 Auto Zeroing the Transducer...................................... 55
3.4.3 Calibrating the Seal Pak ............................................ 56
3.5 Priming the Needle Wash Pump........................................... 59
3.6 Configuring the Autosampler ................................................ 60
3.6.1 Overview of Configuration ......................................... 60
3.6.2 Setting Parameters for LC System Operation............ 63
3.6.3 Entering Hardware Changes ..................................... 67
3.7 System Verification................................................................ 69
3.8 Power Down and Storage ..................................................... 70
3.8.1 Removing Buffered Mobile Phase ............................. 70
3.8.2 Powering Down.......................................................... 70
3.8.3 Storage...................................................................... 71
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table of Contents 7
Chapter 4
Operating the Autosampler .............................................................. 72
4.1 Overview of Operation.......................................................... 72
4.2 Preparing Samples ............................................................... 74
4.2.1 Preparing Samples.................................................... 74
4.2.2 Selecting Sample Vials.............................................. 76
4.3 Selecting a Needle Wash Solvent......................................... 77
4.4 Loading the Carousel............................................................ 79
4.5 Ensuring Reproducibility....................................................... 81
4.5.1 Overview of Reproducibility....................................... 81
4.5.2 Performing a Purge.................................................... 81
4.5.3 Performing a Compression Check............................. 84
4.6 Running Autosampling.......................................................... 87
4.6.1 Programming Auto Run ............................................. 88
4.6.2 Programming Step Functions.................................... 92
4.6.3 Using Auto Standards ............................................... 94
4.6.4 Using Auto Addition .................................................. 99
4.6.5 Using Auto Transfer ................................................. 103
4.6.6 Programming the Event Output............................... 110
4.6.7 Starting and Stopping an Auto Run......................... 111
4.6.8 Monitoring Auto Run Status..................................... 112
4.7 Making a Stat Run .............................................................. 113
4.8 Sampling Considerations.................................................... 116
4.8.1 Temperature Control................................................ 116
4.8.2 Microbore/Semiprep Injections................................ 117
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
8 Table of Contents
4.8.3 Injecting Viscous Samples ...................................... 120
4.8.4 Purging During an Auto Run.................................... 121
4.8.5 Using Buffered Mobile Phase.................................. 122
Chapter 5
Maintenance .................................................................................. 124
5.1 Defrosting the Heater/Cooler.............................................. 124
5.2 Replacing the Syringe......................................................... 126
5.2.1 Removing the Syringe ............................................. 126
5.2.2 Installing the New Syringe....................................... 129
5.3 Replacing the Seal Pak....................................................... 132
5.3.1 Removing the Injector.............................................. 133
5.3.2 Removing the Seal Pak ........................................... 134
5.3.3 Replacing the Needle .............................................. 135
5.3.4 Installing a New Seal Pak........................................ 136
5.3.5 Installing the Injector................................................ 137
5.3.6 Calibrating the Seal Pak .......................................... 137
5.4 Replacing In-Line Filters..................................................... 138
Chapter 6
Troubleshooting ............................................................................. 141
6.1 Safety and Handling............................................................ 141
6.2 Error Messages................................................................... 142
6.2.1 Informational Error Messages.................................. 143
6.2.2 Calibration (CAL) Error Messages........................... 143
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table of Contents 9
6.2.3 Carousel (CAR) Error Messages............................. 144
6.2.4 Heater/Cooler (H/C) Error Messages ...................... 146
6.2.5 Injector (INJ) Error Messages.................................. 146
6.2.6 Syringe (SYR) Error Messages ............................... 147
6.3 Troubleshooting Tables........................................................ 147
6.4 Troubleshooting Procedures ............................................... 155
6.4.1 Manual Syringe Purge............................................. 155
6.4.2 Valve Leak Test........................................................ 156
6.4.3 Manual Transducer Adjustment ............................... 159
Appendix A
Specifications ................................................................................. 162
Appendix B
Spare Parts..................................................................................... 165
Appendix C
Warranty Information...................................................................... 169
C.1 Limited Product Warranty................................................... 169
C.2 Shipments, Damages, Claims, Returns.............................. 172
Appendix D
Reproducibility and Solvent Degassing.......................................... 174
D.1 Factors Affecting Reproducibility ........................................ 174
D.1.1 Chemical Factors Affecting Reproducibility............. 174
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Other manuals for 717plus
1
Table of contents
Other Waters Laboratory Equipment manuals
Waters
Waters Andrew Alliance Magnet+ User manual
Waters
Waters Quattro Premier XE Manual
Waters
Waters TA Instruments Sample/Temperature Stage Manual
Waters
Waters TRIZAIC UPLC Parts list manual
Waters
Waters ACQUITY UPLC Peptide HSS T3 100A Guide
Waters
Waters ACQUITY Isocratic Solvent Manager Operating manual
Waters
Waters Xevo TQ-S Operating manual
Waters
Waters Shaker+ Guide
Waters
Waters Otto SPEcialist PPM Operating manual
Waters
Waters Autospec Premier Manual
Waters
Waters ACQUITY Refractive Index Detector Operating manual
Waters
Waters GCT Premier Manual
Waters
Waters Vion IMS QTof Operating manual
Waters
Waters 2410 User manual
Waters
Waters Xevo TQD Operating manual
Waters
Waters ACQUITY UPLC M-Class Parts list manual
Waters
Waters Atlantis Premier BEH C18 AX Columns Guide
Waters
Waters Xevo G2-XS QTof Operating manual
Waters
Waters Xevo TQD User manual
Waters
Waters ACQUITY CM-30S Operating manual
Popular Laboratory Equipment manuals by other brands
Agilent Technologies
Agilent Technologies 5800 ICP-OES user guide
Endress+Hauser
Endress+Hauser Cleanfit CPA875 operating instructions
NI
NI PXI-5422 CALIBRATION PROCEDURE
Collomix
Collomix Aqix operating instructions
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series operating manual
Ocean Insight
Ocean Insight FLAME-NIR+ Installation and operation manual
Parker
Parker ALIGN-MG-NA Installation, operation and maintenance manual
BD
BD 644787 user guide
DENTAURUM
DENTAURUM Compact Megaplus Instructions for use
Biuged Laboratory Instruments
Biuged Laboratory Instruments BGD 626 instruction manual
VWR
VWR SAS Super IAQ instruction manual
illumina
illumina MiSeqDx reference guide