VXI VoxStar User manual
VXi VoxStar™
User Guide
Compatible with most Bluetooth®phones and Bluetooth
enabled-compute s (Windows® o Macintosh®)
SAFETY INSTRUCTIONS
• Avoid hearing damage. Set volume at lowest
comfortable level. f you experience ringing in
your ears or voices sound muffled, stop using
the headset. Avoid turning up volume to block
noisy surroundings (it’s possible to adapt to
volume that is too high).
• Check with local and state laws regarding cell
phone/headset usage while operating
a motor vehicle.
• Do not immerse any part of this product in water.
• Plastic bags and small parts may cause
choking if ingested. Keep them away from
small children and pets.
• Use only the power cords included with this
product.
• Avoid temperatures exceeding 140° F
(will cause equipment failure).
GLOSSARY OF TERMS
On: Headset is on, but there is no connection
to the phone (blue light, double flash).
MFB: Abbreviation for “Multifunction Button.”
Multipoint Mode: Multipoint Mode allows you to
pair and switch between two Bluetooth devices.
aired: Two Bluetooth devices agree to
communicate with one another.
Standby Mode: Headset is on, Bluetooth link is
active, and the user is not on a call (blue light
flashes slowly).
Talk Mode: Headset is in use with the cell phone
while the cell phone is on an active call (blue light
flashes slowly).
VXi VoxStar™User Guide PAGE 2
SAFETY INSTRUCTIONS / GLOSSARY
VXi VoxStar™User Guide PAGE 3
TABLE OF CONTENTS
Package Contents ............................................4
Proper Fit and Placement ................................5
Charging the Headset ......................................6
Battery Power ndicators ..................................7
Headset Controls..............................................8
On/Standby/Off ................................................9
Pairing with a Cell Phone................................10
Multiple Device Pairing ..................................11
Multipoint Mode ............................................12
Proximity Pairing ............................................13
Making a Call ................................................14
Answering a Call ............................................15
Operation While Using the
Charger/Adapter ............................................16
Additional Functions ......................................17
• Last Number Redial
• Rejecting a Call
• Voice Dial
• Transfer Audio
• Turn Indicator Lights On/Off
• Automatic Bluetooth Connection
Reset Paired Devices List ..............................19
Call Waiting/Rejecting a Call ..........................20
Specifications ................................................21
Functions & ndicators....................................22
Warranty ........................................................26
FCC Notice to Users ......................................27
C Notice to Canadian Users ..........................28
VXi VoxStar™User Guide PAGE 4
PACKAGE CONTENTS
1. VoxStar™ Headset with Ear Hook
2. Cheek Pad
3. Foam Ear Cushions
(1 small and 1 large)
4. Rubber Ear Cushion
5. Contoured Ear Buds
(1 small, 1 medium, and 1 large)
6. Ear Bud Adapter Ring
7. USB Charging Cable
8. AC Adapter
9. Quick-Start Guide (not shown)
Images a e not shown to scale.
24
3
6
1
5
7
8
VXi VoxStar™User Guide PAGE 5
PROPER FIT AND PLACEMENT
To get the best performance from our noise-canceling technology, position the microphone near the
corner of your mouth. Positioning is important; small adjustments in microphone placement can
improve performance.
Over-the-ear wearing style: Attach to ear hook as shown. Add foam or rubber ear cushion and optional
foam cheek pad. Place the ear hook over your ear and mold it so it fits securely and comfortably.
Optional cheek pad goes he e
Ear Bud Assembly: Multiple sizes of ear tips are included. Choose the size that gives you the optimal fit.
VXi VoxStar™User Guide PAGE 6
CHARGING THE HEADSET
Connect charger cord into the headset’s charging port. The MFB’s indicator light may turn blue for several
seconds while the headset determines the level of charge the battery is holding. Do not remove the
headset from the charger. f the headset is not fully charged, the indicator will turn RED within a short
period (less than 3 minutes). When the indicator turns blue—and stays blue—the unit is fully charged.
t could take approximately 2.5 hours to achieve a complete charge.
Hea set Charging Port USB Charging Cable & DC A apter
VXi VoxStar™User Guide PAGE 7
HEADSET CONTROLS
While charging, the MFB’s indicator light shows
the level of battery power on your VoxStar
as follows:
Blue light: Fully charged. Over 7 hours’ talk time.
Red light: Less than a full charge.
For best performance, keep charging the headset
when not in use. Indicato Light
VXi VoxStar™User Guide PAGE 8
HEADSET CONTROLS
Volume Increase: Quickly press and
release the Volume Up/Mute button.
Repeat until desired volume is attained.
Volume Decrease: Quickly press and
release the Volume Down button.
Repeat until desired volume is attained.
Microphone Mute/Un-Mute: While on
a call, hold down the Volume Up/Mute
button for 2 seconds until you hear a
beep. A mute reminder beep will be
heard every 10 seconds. Repeat to
un-mute.
Volume Up/Mute Volume Down
Indicato Lights Multifunction Button (MFB)
VXi VoxStar™User Guide PAGE 9
ON / STANDBY / OFF
Turn Headset On: Hold down the MFB for approximately 2-3 seconds until you hear a voice prompt
(in English), “Power on.” The blue light will flash twice every second.
Standby Mode: Once the headset is turned on (after the initial pairing), it will attempt to connect to the
last device that it was paired with, putting itself into Standby Mode. (The headset can also be put into
Standby Mode with a quick press and release of the MFB). The blue light will flash indicating an active
Bluetooth link. The headset will give a voice prompt (in English), “Your headset is connected.”
Turn Headset Off (conserves battery power): Hold down the MFB for approximately 3-4 seconds until
you hear a voice prompt (in English), “Power off.” A red light will flash 4 times and the headset will
turn off.
VXi VoxStar™User Guide PAGE 10
PAIRING WITH A CELL PHONE
Keep headset and phone no less than 3 inches and no more than 3 feet apart while pairing. Keep other
Bluetooth devices at least 50 feet away, or turn them off. NOTE: The headset can be paired with up to 8
different devices but can only be connected to one at a time. It can only switch back and forth between
2 devices in Multipoint Mode.
1. Turn headset off.
2. Press the MFB until the light rapidly flashes blue and you hear the audio prompt “Power On” and keep
holding until you hear “Discovering.” IMPORTANT: Wait for all audio prompts and the blue, rapidly flash-
in li ht. This may take up to 8–10 seconds. Release the MFB.
3. Put your cell phone into Bluetooth Search/Scan Mode per the manufacturer’s instructions.
4. Wait while the devices discover each other: This could take up to 2 minutes. Once the phone discovers
the headset, select “pair” and enter a passcode of “0000” if instructed. Once pairing is complete, the
headset’s rapid blue light will stop flashing and the phone may prompt you to ‘connect’ to the headset.
Enter “Yes” on the phone if prompted to connect to the headset. When connected, you’ll hear the
voice prompt , “Your headset is connected,” and the blue light will flash slowly (once every 3–4
seconds), indicating that the headset is in Standby Mode and ready to make or receive calls.
Other manuals for VoxStar
2
Table of contents
