Electric Blanket | 4
Important Safety Instructions
DANGER: To reduce risks of burns, electric
shock, fire, and personal injury, this product
must be used in accordance with the
following instructions:
Setting Up:
1. NEVER trap or pinch any of the electrical cords in any way. Make
sure the cords are NEVER rested between the mattress and box
springs.
2. The heated area should always lie flat to prevent overheating.
3. If the plug does not fit into your outlet, contact a qualified
electrician.
4. Be sure that the power supply is used only on 120V, 60 HZ
current supply.
5. Make sure the cord from the controller to your heated product is
connected and locked tightly.
6. You may use this electric product with any sheets, mattress pads or other blankets but NEVER
in combination with any other electric blankets or electric mattress pads.
7. The warming product should never be folded, balled up or bunched in any way when in use.
May result in overheating and/or permanent wrinkling of the fabric.
8. Do not use with generators, power converters, or inverters.
Care and Maintenance:
1. NEVER use pins in and around the warming product.
2. Cats, dogs and other pets should always be kept away from the product, as a sharp claw may
result in damage to the heating element.
3. Always turn off the electric current when the warming product is not in use, either by turning
off the controller or unplugging from the wall outlet.
4. Wrapping of the cord around the controls may damage the cord. Loop loosely when storing.
5. NEVER iron your warming product.
6. NEVER use dry cleaning fluid on this product. Cleaning solvents may damage the wiring insulation.
7. Do not tuck in the wired area of this bedding.
8. Do not route electrical cords between the mattress and box spring.
9. Do not allow the cords to be pinched.
10. Keep the control away from drafty areas that may become damp or wet such as an open window.
11. Do not use pins – They may damage the electric wiring.
12. Be sure that this bedding is used on an alternating-current supply circuit of the proper voltage.
13. Turn off or unplug when not in use. Excessive heating may result from folding bedding, other
than a mattress, when in actual use.
14. If improper operation of this bedding is observed, discontinue its use immediately and
consult the manufacturer or the dealer regarding its repair.
