VONROC MS504AC User manual
COMPACT SLIDING MITRE SAW
MS504AC
EN Original Instructions 08
DE Übersetzung Der Originalbetriebsanleitung 20
NL Vertaling van de oorspronkelijke gebruiksaanwijzing 34
FR Traduction de la notice originale 48
ES Traducción del manual original 62
IT Traduzione delle istruzioni originali 75
PL Tłumaczenie instrukcji oryginalnej 89
WWW.VONROC.COM2
A
27
2
24
37
23
38
3
26
29
25
21
22
7
9
8
10
B
2
3
1
4
5
6
15
22
25
28
27
46
14
8
7
35
31
19 18
17
16
12 323635
20
12
9
10
11
35
12
13
WWW.VONROC.COM 3
15
39
47
C
38
37
D-1
D-2 D-3
30
E F
WWW.VONROC.COM4
G-1 G-2
G-3 G-4
H I
I
40
40
42
41
6
43
6
35
44
21
33
36
WWW.VONROC.COM 5
K
N O
L
O
L
N
J
76
M
6
7
10
8
WWW.VONROC.COM6
QP
4931
32
24 45
50
TSR
4846 18 48
48
UV-1
35 36
36 35
WWW.VONROC.COM 7
30
28
52
WV-2 2826
X Y
51 51
8
EN
WWW.VONROC.COM
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fire and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user manual
or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-obser-
vance of the instructions in this manual.
Risk of electric shock.
Keep bystanders away.
Wear a dust protection.
Wear ear protection.
Wear eye protection.
Attention: Laser radiation. Do not stare into
the beam Class 2 laser.
Keep hands away from the cutting area
while the power tool is running. Contact
with the saw blade can lead to injuries.
Danger area! Keep hands, fingers or arms
away from this area.
Transport the machine only when the
machine is in inward transport position.
Class II machine - Double insulation -
You don’t need any earthed plug.
The product is in accordance with the
applicable safety standards in the European
directives.
123
The adjustable fence must be
pulled outward when sawing
mitre/bevel angles.
Ø30mm
Ømax.
216mm
Take note of the dimensions of
the saw blade. The hole
diameter must fit the tool
spindle without play. If it is
necessary to use reducers,
ensure that the dimensions of
the reducer are suitable for the
base blade thickness and the
saw blade hole diameter, as well
as the tool spindle diameter.
Wherever possible, use the
reducers provided with the saw
blade. The saw blade diameter
must match the information
specified on the symbol.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to
follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or batte-
ry-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of flamma-
ble liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while ope-
rating a power tool. Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
EN
9
WWW.VONROC.COM
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a)
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting.
Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool.
Carrying power tools with
your finger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust related hazards.
h)
Do not let familiarity gained from frequent use
of tools allow you to become complacent and ig-
nore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any adjust-
ments, changing accessories, or storing power
tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of child-
ren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool’s operation. If dama-
ged, have the power tool repaired before use.
Many accidents are caused by poorly maintain-
ed power tools.
f)
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe
handling and control of the tool in unexpected
situations.
10
EN
WWW.VONROC.COM
6) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
SPECIFIC SAFETY INSTRUCTIONS
• Mitre saws are intended to cut wood or wood-li-
ke products, they cannot be used with abrasive
cut-off wheels for cutting ferrous material such
as bars, rods, studs, etc. Abrasive dust causes
moving parts such as the lower guard to jam.
Sparks from abrasive cutting will burn the lower
guard, the kerf insert and other plastic parts.
• Use clamps to support the workpiece whenever
possible. If supporting the workpiece by hand,
you must always keep your hand at least 100 mm
from either side of the saw blade. Do not use this
saw to cut pieces that are too small to be secure-
ly clamped or held by hand. If your hand is placed
too close to the saw blade, there is an increased
risk of injury from blade contact.
• The workpiece must be stationary and clamped
or held against both the fence and the table.
Do not feed the workpiece into the blade or cut
“freehand” in any way. Unrestrained or moving
workpieces could be thrown at high speeds,
causing injury.
• Push the saw through the workpiece. Do not
pull the saw through the workpiece. To make a
cut, raise the saw head and pull it out over the
workpiece without cutting, start the motor, press
the saw head down and push the saw through
the workpiece. Cutting on the pull stroke is likely
to cause the saw blade to climb on top of the
workpiece and violently throw the blade assem-
bly towards the operator.
• Never cross your hand over the intended line of
cutting either in front or behind the saw blade.
Supporting the workpiece “cross handed” i.e.
holding the workpiece to the right of the saw
blade with your left hand or vice versa is very
dangerous.
• Do not reach behind the fence with either hand
closer than 100 mm from either side of the saw
blade, to remove wood scraps, or for any other
reason while the blade is spinning. The proximity
of the spinning saw blade to your hand may not
be obvious and you may be seriously injured.
• Inspect your workpiece before cutting. If the
workpiece is bowed or warped, clamp it with the
outside bowed face toward the fence. Always
make certain that there is no gap between the
workpiece, fence and table along the line of the
cut. Bent or warped workpieces can twist or
shift and may cause binding on the spinning saw
blade while cutting. There should be no nails or
foreign objects in the workpiece.
• Do not use the saw until the table is clear of all
tools, wood scraps, etc., except for the workpie-
ce. Small debris or loose pieces of wood or other
objects that contact the revolving blade can be
thrown with high speed.
• Cut only one workpiece at a time. Stacked multi-
ple workpieces cannot be adequately clamped or
braced and may bind on the blade or shift during
cutting.
• Ensure the mitre saw is mounted or placed on a
level, firm work surface before use. A level and
firm work surface reduces the risk of the mitre
saw becoming unstable.
• Plan your work. Every time you change the bevel
or mitre angle setting, make sure the adjustable
fence is set correctly to support the workpie-
ce and will not interfere with the blade or the
guarding system. Without turning the tool “ON”
and with no workpiece on the table, move the
saw blade through a complete simulated cut to
assure there will be no interference or danger of
cutting the fence.
• Provide adequate support such as table exten-
sions, saw horses, etc. for a workpiece that is
wider or longer than the table top. Workpieces
longer or wider than the mitre saw table can tip
if not securely supported. If the cut-off piece or
workpiece tips, it can lift the lower guard or be
thrown by the spinning blade.
• Do not use another person as a substitute for
a table extension or as additional support. Un-
stable support for the workpiece can cause the
blade to bind or the workpiece to shift during the
cutting operation pulling you and the helper into
the spinning blade.
• The cut-off piece must not be jammed or pressed
by any means against the spinning saw blade. If
confined, i.e. using length stops, the cut-off piece
could get wedged against the blade and thrown
violently.
• Always use a clamp or a fixture designed to
properly support round material such as rods or
tubing. Rods have a tendency to roll while being
cut, causing the blade to “bite” and pull the work
Other manuals for MS504AC
1
Table of contents
Languages:
Other VONROC Saw manuals
VONROC
VONROC RS502AC User manual
VONROC
VONROC CS502AC User manual
VONROC
VONROC RS501DC User manual
VONROC
VONROC MS503AC User manual
VONROC
VONROC MS502AC User manual
VONROC
VONROC CS501DC User manual
VONROC
VONROC CS501DC User manual
VONROC
VONROC MS506AC User manual
VONROC
VONROC CS501DC User manual
VONROC
VONROC MS502AC User manual
VONROC
VONROC TS502AC User manual
VONROC
VONROC MS504AC User manual
VONROC
VONROC MS507AC User manual
VONROC
VONROC S3 RS501DC User manual
VONROC
VONROC TS501AC User manual
VONROC
VONROC CS502AC User manual
VONROC
VONROC RS501DC User manual
VONROC
VONROC S CS503AC User manual
VONROC
VONROC CS505AC User manual
VONROC
VONROC MS505AC User manual
