Installation and use
Before using your VOLO LIP LIGHT for the first
time, fully charge battery.
1.Turn OFF the light
2.Remove USB Protective Cover
3.Connect micro USB cable and light to powered USB port
4.Once charging, button will be on red. Light will be charged
after 3-4 hours or when button turn green.
5.Remove light from Charger and reinstall USB protective
cover, ensure USB protective cover is fully installed for water
resistance.
CHARGE
Always charge the product before use
Connect the device’s charge cable to the female USB
port on the front of the PWR Bank.
To charge a device:
SWITCH OPERATION
Permanent
Slow Flashing
Fast Flashing
4Modes: Permanent/Fast Flashing/Slow Flashing/
Breathing;
Easy to install & release, Rechargable Lithium Battery,
Soft light for people's visual safe
Breathing
OFF
ON
INSTALLATION AND USE
PRODUCT USE
