Vivo STAND-V104B User manual

Quad Monitor Desk Stand

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v104b

SKU: STAND-V104B

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3

ASSEMBLY STEPS

PACKAGE CONTENTS

TOOLS NEEDED

WARNING!

Phillips

Screwdriver

A (x1)

Arm

B(x4)

VESA Plate

D(x1)

Base

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

E(x1)

Lower Pole

F (x1)

Upper Pole

I (x2)

Cable Clip

J (x4)

Thumbscrew

K (x3)

M6x12

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

M-B (x16)

M4x16

M-C (x16)

M5x12

L (x1)

3mm Allen

Wrench

M(x1)

4mm Allen

Wrench

STEP 1

M-D (x2)

M5x16

Attach the pole cap (G) to the top of the upper pole (F).

M-E (x16)

D5 Washer

M-F (x16)

Spacer

N(x1)

5mm Allen

Wrench

O (x1)

6mm Allen

Wrench

M-A (x16)

M4x12

C (x1)

Bracket

H (x1)

Pole

Connector

G (x1)

Pole Cap

Drill

15.4lbs

(7kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

PER ARM

STEP 2

Mount the lower pole (E) to the base (D) using M6x12 bolts (K) with the 4mm Allen wrench (M).

STEP 3

Install the arm (A) and one cable clip (I) to the lower pole (E). Fasten the bolt with the 5mm Allen

wrench (N).

4 5

STEP 7

Slide the VESA plates (B) with monitors onto the heads of the arms (B) and bracket (C).

Install the thumb screws (J) to secure the monitors.

STEP 4

Screw the pole connector (H) down onto the lower pole (E), then screw the upper pole (F) into the

pole connector (Note: pole connector set screws may need to be loosened first). Tighten the set

screws in the pole connector using the 3mm Allen wrench (L).

OPTION A: Flat Back Monitor

Install the VESA plates (B) to the monitors using bolts (M-A or M-C) and washers (M-E).

STEP 5

Install the bracket (C) and second cable clip (I) to the upper pole (F). Fasten the bolt with the 6mm

Allen wrench (O).

STEP 6

OPTION B: Curved/Recessed Back Monitor

Install the VESA plates (B) to monitors using bolts (M-B or M-D), washers (M-E) and spacers

(M-F).

STEP 6 (Continued)

6 7

STEP 8

Tighten or loosen the tilt joints using the 6mm Allen wrench (O).

STEP 9

Manage cables using the installed cable clips (I).

STEP 10

Store the Allen wrenches in the cable clips

(I) for future use.

STEP 11

CAUTION: To prevent tipping, please be careful not to extend the arms too far forward or backward.

STEP 12

Adjust monitor alignment using 5mm Allen wrench (N).

LAST UPDATED: 03/20/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 