Vivo MOUNT-SP01CB/CW User manual

Clamp-on Speaker Stand - 2 Pack

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-sp01cb

SKU: MOUNT-SP01CB/CW

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2

ASSEMBLY STEPS

PACKAGE CONTENTS

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please contact our product support team at 309-278-5303 or [email protected]om for

further assistance. Check carefully to make sure there are no missing or defective parts. Improper

installation may cause damage or serious injury. Do not use this product for any purpose that is not

explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or

injury caused by improper mounting, incorrect assembly or inappropriate use.

S-C (x2)

Conical Washer

C(x4)

So Pad

A(x2)

Mount

S-A (x2)

M8x25mm Screw

S-B (x2)

M8 Spacer

B(x2)

Speaker Plate

T-A(x1)

5mm Allen Wrench

STEP 1

Loosen the clamp on Mounts (A) and assemble them to the desktop by re-tightening the clamps.

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

33lbs

(15kg)

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

A

3

STEP 3

Remove the adhesive backing from So Pads

(C) and stick them to the top surface of Speaker

Plates (B).

STEP 2

Loosen the knobs on the front of Mounts (A) to adjust the height. Insert the Safety Pin (A1) into the

holes located on the sha, and re-tighten the knob to lock the postion.

STEP 4

Assemble Speaker Plates (B) to Mounts (A)

using M8x25mm Screws (S-A) with M8 Spacers

(S-B) and Conical Washers (S-C). Tighten using

5mm Allen Wrench (T-A).

STEP 5

Place speakers on top of the assembled stands. Make tilt and height adjustments as necessary. If

desired, rotate Speaker Plate (B) so the lip is in the front for the speaker to rest on.

T-A

S-A

S-B

S-C

A

C

B

B

B

A

A1

LAST UPDATED: 08/15/2023

REV1

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 