Vivitar Vivicam 2010 User manual

Vivicam 2010 User manual

English 20100001

Contents

1 Introduction------------------------------------------------------------- 1

Overview----------------------------------------------------------------- 1

Warnings and Precautions------------------------------------------ 1

Package Contents----------------------------------------------------- 3

System Requirements------------------------------------------------ 4

Camera Features------------------------------------------------------ 5

2 Inserting the Batteries------------------------------------------------ 6

3 Insert/Remove SD/MMC Memory Cards------------------------ 8

4 Capturing Images----------------------------------------------------- 9

Power On the Camera----------------------------------------------- 9

Power Off the Camera------------------------------------------------ 9

5 Camera Status Icons------------------------------------------------- 10

6 Display Information and flows-------------------------------------- 11

7 Capture an Image----------------------------------------------------- 15

8 Using Flash------------------------------------------------------------- 16

9 Self-Timer--------------------------------------------------------------- 17

10 AVI Capture------------------------------------------------------------- 18

11 Continuous Capture-------------------------------------------------- 19

12 Deleting Images-------------------------------------------------------- 19

Delete the Last Image------------------------------------------------ 19

Delete All Images------------------------------------------------------ 19

Techniques for Capturing the Best Images---------------------- 21

13 Installing Camera Driver and Software--------------------------- 23

14 Uninstalling Software ------------------------------------------------ 23

Uninstalling Camera Driver ----------------------------------------- 23

15 Downloading Images to Your Computer------------------------- 24

For Windows 98/me customers------------------------------------ 24

For Windows XP------------------------------------------------------- 24

For Windows 2000/me/98------------------------------------------- 24

16 Arcsoft PhotoImpression 5------------------------------------------ 26

17 Arcsoft VideoImpression 2------------------------------------------ 28

18 Using the Camera In PC-Cam Mode----------------------------- 31

19 Checking the Connection of Your Camera---------------------- 32

20 Internet Video Conferencing---------------------------------------- 33

21 Using the camera with NetMeeting-------------------------------- 34

22 Specifications----------------------------------------------------------- 35

23 Appendix A-------------------------------------------------------------- 36

WARNING

When the battery icon is blinking, download the pictures to

your computer immediately before changing the batteries. A

delay could result in the loss of your images if the batteries

become depleted.

1. Introduction

Overview

Thank you for purchasing your digital camera. It can capture digital images,

short video-clips (continuous shooting mode), and it can also serve as a

PC/Web camera. The camera is equipped with 8 MB of memory to store

your images and movie clips. You may download your images and movie

clips to your computer using the USB cable and included software.

Warnings and Precautions

FCC STATEMENT -

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits

for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna

2. Increase the separation between the equipment and receiver

3. Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

4. Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with Class B limits in Subpart B

of Part 15 of the FCC rules. Do not make any changes or modifications to

the equipment unless otherwise specified in the manual. If such changes or

modifications should be made, you could be required to stop operation of the

equipment.

GENERAL WARNINGS –

Do not use batteries other than those specified for use with the camera. The

use of unsuitable batteries may result in the batteries splitting or leaking and

causing a fire, injury, or soiling of the battery compartment.

When placing batteries in the camera, check the polarity of the batteries

(- and +) to ensure proper orientation. Incorrect polarity may result in the

batteries splitting or leaking and causing a fire, injury, or soiling of the battery

compartment.

Remove the batteries if the camera will not be used for an extended period

of time. The batteries may leak and cause a fire, injury or soiling of the

battery compartment. If the batteries leak clean and wipe the battery

compartment carefully and install new batteries. Wash your hands carefully

if you touch the battery fluid. Please note that when you remove the batteries

your images will be lost from the camera memory.

WARNING: Handling the USB cable on this product may expose you to lead,

a chemical known to the State of California to cause birth defects or other

reproductive harm. Wash your hands after handling.

TRADEMARK INFORMATION -

Microsoft® and Windows® are U.S. registered trademarks of Microsoft

Corporation.

Pentium® is a registered trademark of Intel Corporation. Other names and

products may be trademarks or registered trademarks of their respective

owner.

Package Contents

1. Camera

2. USB cable

3. Software

4. User’s Manual

5. Two AA batteries

6. Hand strap

Note: Included components may vary, as specified by local retailers and

locations. Check with your retailer for specifics.

System Requirements

You must use a computer to download the images from your camera. The

computer that you use must meet the following minimum requirements:

1. Windows Me/2000/XP

2. Direct X 8.0, or higher

3. 128 MB RAM

4. 60 MB hard disk space available

5. Available USB port

6. CD-ROM drive

Camera Features

2. Inserting the Batteries

Step 1: Open the battery door by sliding it down and

then move it outwards from the camera body.

Step 2: Insert two AA batteries with the polarity as

shown:

Step 3: Close the battery cover.

Warning: Do not open the battery door when the camera is powered ON.

This will cause all images in memory to be lost immediately. If you open the

battery door when the camera is OFF (when changing the batteries) you

must close the door within thirty (30) seconds or your images will be erased

from memory.

Notes:

1. Always download your images to your computer soon after you have

captured them. Never assume your images will be retained for more

than

three or four days. If the batteries are depleted, your images will be lost.

2. If you must change the batteries, make sure the camera is OFF and then

change the batteries within 30 seconds.

3. If you will not use the camera for a long time (several days, or more)

remove the batteries. The batteries will discharge slowly if left in the

camera. This may cause complete battery discharge as well as loss of

images. The batteries may corrode if left in the camera for extended

periods of time.

4. Dispose of batteries properly in accordance with local laws and

regulations. Do not place them in fire.

Table of contents

Other Vivitar Digital Camera manuals

Vivitar

Vivitar ViviCam S425 User manual

Vivitar

Vivitar Vivicam 3635 User manual

Vivitar

Vivitar ViviCam 7399 ELITE User manual

Vivitar

Vivitar ViviCam 46 User manual

Vivitar

Vivitar ViviCam 38 User manual

Vivitar

Vivitar Vivicam 3640 User manual

Vivitar

Vivitar ViviCam T328 User manual

Vivitar

Vivitar Vivicam 3826 User manual

Vivitar

Vivitar ViviCam 3730 User manual

Vivitar

Vivitar Vivicam 3930 User manual

Vivitar

Vivitar ViviCam 3345 User manual

Vivitar

Vivitar DSC350 User manual

Vivitar

Vivitar ViviCam X122 User manual

Vivitar

Vivitar ViviCam 2750 User manual

Vivitar

Vivitar ViviCam 8690v2 User manual

Vivitar

Vivitar Vivicam 3060 User manual

Vivitar

Vivitar Vivicam 5399 User manual

Vivitar

Vivitar Vivicam 3350B User manual

Vivitar

Vivitar ViviCam 5018 User manual

Vivitar

Vivitar Vivicam 2005 User manual

Vivitar

Vivitar Vivicam 5188 User manual

Vivitar

Vivitar ViviCam 3105s User manual

Vivitar

Vivitar Vivicam 5340s User manual

Vivitar

Vivitar Vivicam 5B User manual

Popular Digital Camera manuals by other brands

Mercury

Mercury 350K user manual

Pentax

Pentax Optio LS 465 operating manual

Sanyo

Sanyo VPC-S1085 instruction manual

GE SMART A1255 user manual

Point Grey

Point Grey Gazelle Getting started

Nikon

Nikon COOLPIX A Reference manual

Pentax

Pentax P-5 manual

BlazeVideo

BlazeVideo A280 instruction manual

Sony

Sony MCA-20 manual

Sony

Sony Alpha DSLR-A290 instruction manual

ATIK Cameras

ATIK Cameras One user manual

CohuHD Costar

CohuHD Costar 3930 Series Installation and operation manual

Leica

Leica M10-R quick start guide

FujiFilm

FujiFilm FinePix A700 owner's manual

Lorex

Lorex LNZ81P25 Series quick start guide

GE J1470S user manual

Sony

Sony A6700 Startup guide

Canon

Canon EOS ELAN7 instructions