Vitek VT-TNR414P User manual

QUICK START GUIDE

FEATURES:

● 4, 8, 32, and 64 Channel Stand-alone Real-time IP Network Video Recorders

● Full 8 Megapixel Real-time recording & playback

● 4K HDMI & VGA Video Outputs

● H.265 / H.264 Video Compression

● Plug and Play & Auto configuration for many leading ONVIF compliant IP Camera models

● Internal PoE Switch (VT-TNR414P, VT-TNR818P, and VT-TNR3216P)

● 1 Gigabit LAN

● Pentaplex: Live Display / Record / Playback / Backup / Remote Access

● Supports SATA2/SATA3 HDD

● Applications for iOS® & Android®

● Remote Viewing over the Internet via Web Browser or LAN

● Mac OS® Client & CMS Central Management Software Included

● Supports both Dynamic and Static IP Addresses

● Web-based remote configuration

● Control locally via Front Panel Controls, USB Mouse, or with the Included IR Remote control

VT-TNR Series

Transcendent Series 4, 8, 32, and 64 Channel 5

MegaPixel H.265 Real Time Network Video

Recorders with 4K HDMI Output

PLEASE NOTE:

Complete User Guide, Software, Tools, and Updates

are available online. Scan the QR Code or visit:

http://www.vitekcctv.com/Downloads

3. Rear Panel Connections

1. Notes

● Please read this instruction carefully for correct use of the product and preserve it for reference purposes.

● This manual is suitable for 8/16 CH Network Video Recorder. All the examples and pictures used here are for

reference only.

● There may be several technically incorrect places or printing errors in this manual. The updates will be added into

the new version of this manual. The contents of this manual are subject to change without notice.

● To prevent electric shocks and risk of fire hazards, only use the power source that Vitek provided with your NVR.

2. Check Package Contents

Please confirm that the device and all accessories are included in the package. If there is any damage, shortages

or defects, please contact your dealer immediately.

SETUP & CONFIGURATION:

1) Transcendent Series NVR

2) IR Remote Control

3) Quick Start Guide

4) Power Supply

5) Rack Ears (32 & 64 Channel Models)

6) HDD Screws

7) SATA Cables

8) USB Mouse

VT-TNR414P Rear Panel Connections

VT-TNR818P Rear Panel Connections

VT-TNR3216P Rear Panel Connections

VT-TNR6480 Rear Panel Connections

4. System Startup

● Please make sure all the connections are done properly before you power on the unit. Proper startup and

shutdown are crucial to expending the life of your device

● Startup:

① Connect the output display device to the VGA/HDMI interface of the NVR.

② Connect the mouse and power. The device will boot and the power LED will turn blue.

③ A WIZARD window will pop up (you should select the display language the first time you use the NVR). Refer to

3.1 Startup Wizard for details.

Click “Wizard Setup” to start wizard. The setting steps are as follows.

System Login:

Set your own password or use the default when you use the wizard for the first time (the default username of the

system is admin and the default password of admin is 123456); select the login username and enter the correspond-

ing password next time.

Click “Edit Security Question” to set questions and answers for password security of admin. If you forget the pass-

word, please refer to Q4 in Appendix A FAQ for details. Click “Next” to continue or click “Cancel” to exit the wizard.

Date and Time Configuration:

● The date and time of the system needs to be set up if you use the wizard for the first time. Refer to the following

figure. Set the time zone, system time, date format and time format. The DST will be enabled by default if the time

zone selected includes DST. Click “Next” to continue.

Network Settings:

● Check “Obtain an IP address automatically” and “Obtain DNS automatically” to get the IP address and DNS

automatically (the DHCP function of the router in the same LAN should also be enabled), or manually input them.

Input the HTTP port, RTSP port and Server port (please see 11.1.2 Port Configuration for details). Click “Next” to

continue.

Note:

If you use the NVR with the PoE network ports, the online state of the internal Ethernet port will be shown on the

interface. Refer to the picture below. Please refer to 11.1.1 TCP/IPv4 Configuration for detail introduction of the

internal Ethernet port.

QRCode:

● You can scan the QRCode through the mobile client which is installed on a mobile phone or Tablet to log into the

mobile client instantly. Please refer to 12.1 Mobile Client Surveillance for details.

Add Camera:

● Click “Refresh” to refresh the list of online IP cameras which are in the same local network with NVR and then click

to add the searched camera. Click “Add All” to add all the cameras in the list. Click to delete the added

camera. Click “Delete All” to delete all the added cameras.

to add the searched camera. Click “Add All” to add all the cameras in the list. Click to delete the added

● Click to edit the found IP camera as shown on the below left. Input the new IP address, subnet mask, gateway,

username and the password of the camera. Click “OK” to save the settings.

● Click to edit the added camera as shown on the above right. Input the new camera name, IP address, port,

username and the password of the camera. You can click “Test” to test the effectiveness of the input information.

Click “OK” to save the settings. You can change the IP camera name only when the added camera is online. Click

“Next” to continue.

● Click to edit the found IP camera as shown on the below left. Input the new IP address, subnet mask, gateway,

● Click to edit the added camera as shown on the above right. Input the new camera name, IP address, port,

Disk Settings:

● You can view the disk number, disk capacity of the NVR and serial number, R&W status of the disk. Click “Format-

ting” to format the disk. Click “Next” to continue

28492 CONSTELLATION ROAD VALENCIA, CA 91355

WWW.VITEKCCTV.COM

Version 1.0

June 2016

Record Settings:

● Two record modes are available: Auto and Manual.

● Auto: Select one auto mode in the interface as shown below and then click “OK” button to save the settings. See

7.1.1 Mode Configuration for details.

Other manuals for VT-TNR414P

This manual suits for next models

Table of contents

Other Vitek DVR manuals

Vitek

Vitek VT-SHE904A User manual

Vitek

Vitek TRANSCENDENT VT-TNR1626PL User manual

Vitek

Vitek VT-TR5HA1620 User manual

Vitek

Vitek OnCue Bridge User manual

Vitek

Vitek VT-H40 - User manual

Vitek

Vitek VT-TTAR Series User manual

Vitek

Vitek VT-SRL User manual

Vitek

Vitek VT-EH Series User manual

Vitek

Vitek VT-SRE Spire Elite User manual

Vitek

Vitek SAGA "XL" Series User manual

Vitek

Vitek VT-H41 User manual

Vitek

Vitek VT-DVR16000 User manual

Vitek

Vitek VT-EH Series User manual

Vitek

Vitek CHRONO VT-CN1680 User manual

Vitek

Vitek SAGA VT-ST440H User manual

Vitek

Vitek TRANSCENDENT VT-TNR414PN User manual

Vitek

Vitek VT-SRL User manual

Vitek

Vitek Transcendent Series User manual

Vitek

Vitek VT-EHP Series User manual

Vitek

Vitek CHRONO - User manual

Vitek

Vitek VT-E16 User manual

Vitek

Vitek VT-16HD2A-NH User manual

Vitek

Vitek Transcendent VT-TR8NHA Series User manual

Vitek

Vitek Transcendent VT-TTR SERIES User manual

Popular DVR manuals by other brands

FLIR

FLIR M3100E Series instruction manual

VTRACKPRO

VTRACKPRO FPRO300 user manual

Swann

Swann NVR-7085 models instruction manual

XtendLan

XtendLan DVR-1670C user manual

urmet domus

urmet domus 1093/004AHD instructions

Holux

Holux M1 user manual

CMOS DOTCOM

CMOS DOTCOM ANX-1670 manual

Whistler

Whistler D16VRS user guide

Defender Security

Defender Security 82-20235 user manual

MISUMI

MISUMI MP-WF100M user guide

Speco

Speco D8HU user guide

UST

UST DDR-E04AA Hardware user manual

Consolidated

Consolidated Digital Video Recorder user manual

Mace

Mace DVR0404RW Operational manual

RCA

RCA RTD315W user manual

FSM

FSM Colibri Grande PRO user manual

Hauppauge

Hauppauge HD PVR 2 Quick install guide

Identivision

Identivision ICR-PH161i PIONEER user manual