ViewZ VZ-IPM Series User manual

12262023-Rev. A
USER MANUAL
Please read this manual thoroughly before use, and keep it handy for future reference.
24" PROFESSIONAL IP INPUT MONITOR
VZ-IPM SERIES

2User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
Safety Instrucon
Installaon
Funcon
Mounng Guide
RMA
Specicaon
Warranty
1. Mark Indicaon & Substance
1. Package
2. Control and Funcon
1. Monitor Buon Funcon
2. Warning
2. Interface
3. Cauon
4. Operaonal Temperature & Humidity
5. Dot Defect (dead pixel) of TFT
6. FCC RF INTERFERENCE STATEMENT
CONTENTS
3
7
10
36
38
37
40
4
7
10
4
8
5
5
5
6
9
.......................................................................................................................................................................................
.......................................................................................................................................................................................................
...............................................................................................................................................................
............................................................................................................................................................................................
..................................................................................................................................................................................................................
...................................................................................................................................................................................................
........................................................................................................................................................................................................
.......................................................................................................................................................
................................................................................................................................................................................................ ..
......................................................................................................................................................................
................................................................................................................................................................................................
................................................................................................................................................................................................
..................................................................................................................................................................................................
.....................................................................................................................................
.....................................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................................................................................

3User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
1. Read all warnings.
2. Follow all instrucons to ensure longevity of monitor.
3. Do not place the monitor near water.
4. Clean only with dry cloth.
5. Do not block any venlaon openings. Install in accordance with the manufacturer’s instrucons.
6. Do not install near any heat sources such as radiators, heat registers,stoves, or other heat generang
devices.
7. Do not override the safety purpose of the polarized or grounding-type plug.
8. A polarized plug has two blades with one wider than the other.
9. A grounding type plug has two blades and a third grounding prong.
10. The wide blade or the third prong are provided for your safety.
11. If the provided plug does not t into your outlet, consult with electrician for replacement of the outlet.
12. Protect the power cord from being walked on or pinched parcularly at plugs, convenience receptacles
and the point where it connects to the monitor.
13. Only use aachment/accessories specied by the manufacturer.
14. Use only with the cart, stand, tripod, bracket or table specied by the manufacturer or sold with the
monitor. When a cart is used, use cauon when moving the cart & monitor in combinaon to avoid
injuries.
15. Unplug the monitor during lightning storms or when unused for long periods of me.
16. Refer all servicing to qualied service personnel. Servicing is required when the monitor has been
damaged in any way.
The monitor shall not be exposed to dripping or splashing and objects containing liquids, such as vases
shall be placed near the monitor.
The monitor should have ample distance (e.g. 10cm) from the wall for sucient venlaon.
Important Safety Instruction
SAFETY INSTRUCTION

4User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
This symbol is intended to alert the user to the presence of uninsulated & dangerous voltage
within the monitor’s enclosure that may be of sucient magnitude to constute a risk of
electric shock to persons.
This symbol is intended to alert the user to the presence of important operang and
maintenance (servicing) instrucons in the literature accompanying the monitor.
Important Safety Instruction
Mark Indication and Substance
Warning
SAFETY INSTRUCTION
CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
• Do not use damaged or loose cables and plug.
• Do not pull the plug out by the wire nor touch the plug with wet hands.
• Use only a properly grounded plug and receptacle.
• Do not connect too many extension cords or plugs to one outlet.
• Do not excessively bend the plug and wire.
• Do not disconnect the power cord while it's sll plugged into the monitor.
• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or re.
• Never open the monitor. There are no user-serviceable parts inside and opening will void warranty.
• Removing covers may expose you to dangerous shock hazards or other risks.
• Keep any heang devices away from the power cable and monitor.
• Do not place the monitor near water.
• Do not insert objects of any kind into the monitor's open slots, as they may touch dangerous voltage points.
• Please follow the laws and regulaons of your municipality to dispose of the tube properly.
• Do not use the monitor in high temperature, humid, dusty or oily areas.
• Do not install the monitor where it will be exposed to connual vibraon.
• Keep the plasc packaging out of children’s reach.
• If any damage is defected upon rst opening the box, contact agency from which you bought the monitor directly.
• If your monitor does not operate normally – in parcular, if there is any unusual sound or smell coming from the
monitor – unplug it immediately and contact an authorized dealer or the service center.

5User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
Important Safety Instruction
Caution
Available Temperature & Humidity
Dot Defect (dead pixel) of TFT
SAFETY INSTRUCTION
• If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth.
• Make sure to unplug the power cord before cleaning the monitor.
• Make sure to leave a gap between monitor and wall.
• Do not drop the monitor when moving it.
• Place your monitor in a locaon with low humidity and a minimum dust.
• Install the monitor base on a showcase or shelf so that the end of the base does not protrude from the
showcase or shelf.
• Do not place the monitor on an unstable or small surface area.
• Do not install inside a vehicle.
• Disconnect the plug from the outlet during storms or lightning or if it has not been used for a long me.
• Do not try to move the monitor by pulling on the power cord.
• Do not cover the vents on the monitor.
• When moving the monitor, turn o and unplug the power cord. Make sure that all cables, including HDMI
cable and cables connected to other devices, are disconnected before moving it.
• Place the monitor out of children’s reach, as they could damage it by hanging onto it.
• Operang Temperature : 14°F ~ 122°F / -10°C ~ 50°C
• Operang Humidity : 20 ~ 70% RH
ViewZ monitors are manufactured using high-end semiconductor technology with precision rangs of 99.9%
and above. However, it may be the case that certain RGB and white pixels seem darker (or enrely unlit i.e.
black).
Modern producon methods cannot guarantee an absolute fault-free monitor. To this eect, no LED
manufacturer can guarantee a defect free panel. A few isolated pixel or sub-pixel faults are considered
tolerable and dierent policies exist that govern the amount of these tolerable values.
While most pixel faults occur in isolated regions, a cluster of dead pixels or sub-pixels can somemes form for
which a separate ruling applies. A cluster is dened as an area of 5x5 pixels. ViewZ’s policy on pixel failure:
either as an isolated fault or in the form of a cluster is outlined on the website: www.viewzusa.com

6User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
Note
FCC RF INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instrucon manual, may cause harmful interference to radio communicaons. Operaon of this equipment
in a residenal area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio, TV technician for help.
• Only shielded interface cable should be used.
Finally, any changes or modicaons to the equipment by the user not expressly approved by the grantee or
manufacturer could void the users authority to operate such equipment.
► DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the
radio interference regulaon of Canadian Department of communicaons.
Statement
• VGA and XGA are the registered trademark of IBM.
• VESA is the trademark of Video Electronics Standard Associaon.
• HDMI, HDMI logo and High-Denion Mulmedia Interface
(high denion mulmedia digital interface) are the trademark or
registered trademark of HDMI Licensing LLC.
If some company or product trademark is not parcularly stated, the use of trademark has been fully recognized. Do
not alter, decompile, disassemble, decode or conduct reverse engineering to the soware installed in the product, or
it can be deemed as breach of the law.

7User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
The following tools may be required depending on your installaon.
Your ViewZ monitor is shipped with all proper installaon hardware and components. If there are parts missing
and/or damaged, please stop the installaon and contact ViewZ USA at (888)-998-4399.
Electronic Stud Finder Protecve Eye-wearPencil Level Phillips Screwdriver
Assembly Components - provided
Mounting Option
Installation Tools
TFT-LED Monitor (Qty 1)
Monitor Stand (Qty 1)
110V Power Cable (Qty 1)
DC 12V Power Supply (Qty 1)
User Manual (Qty 1) Remote Controller (Qty 1)
(Without baery (AAA))
INSTALLATION
VESA 75, 100
Tilng -20° ~ +20°
VESA 50, 75, 100
15mm Low prole
Swivel -30° ~ +30°
Tilng -12° ~ +5°
VESA 75 ~ 200
Swivel ± 90°
Wall & Pole Mount
Your ViewZ monitor is compable with ViewZ monitor mounts. For more informaon, please contact ViewZ USA at (888)-998-4399.
• Part # • Part # • Part #
WM05 WM11 AM02-A
24IPM
24IPM
24IPM
• Part #
SCM-SQ VESA 75, 100
Swivel 360°
PAN 180°
24IPM
Tilng ± 90°

8User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
The following image is the descripon of interface input ports of IP Input Monitor.
Interface Input Ports
CONNECT EXTERNAL EQUIPMENTS
q rw e t y u i o a
1. HDMI In
2. Reset
3. HDMI Out
4. MICRO SD
5. Audio Out
6. ETHERNET 10/100 (RJ 45)
7. USB (Type C) In
8. USB 3.0 (Type A) In
9. USB 2.0 (Type A) In
10. DC 12V In

9User Manual Visit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
Remote Controller
REMOTE FUNCTION
q
w
r
e
t
y
u
1. Power
2. Up
3. Le
4. Select
5. Right
6. Down
7. Recent Apps
8. N / A
9. Sengs
10. Back
11. Home
12. Volume Up
13. Volume Down
i
o
s
a
d
f
Display image, sound and custom sengs can be adjusted in OSD (On Screen Display) menu by remote controller.
To adjust monitor seng value :
1. Press the 'Sengs' buon to enter the setup of running app
2. Press the 'Recent Apps' buon to select recent apps
3. Press the 'Home' buon to go directly to the home screen
4. Press the 'Back' buon to go back the previous screen
5. Press the ▲ / ▼ / ◄ / ► buons to select the desired sub-menu
6. Press the 'OK' buon to select
7. Press the 'Volume Up & Down' buon to up / down audio volume

10 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
12262023-Rev. A
CONTROL AND FUNCTION
On Monitor, Button Control
1. Le ◄(Le Move)
Move the selecon to the le
2. Right◄(Right Move)
Move the selecon to the right
3. L-C (Le Click Funcon of Mouse)
Same funcon of mouse le click
4. R-C (Right Click Funcon of Mouse)
Same funcon of mouse right click
5. Power
Monitor power on / o
q w e r t
Table of contents
Other ViewZ Monitor manuals

ViewZ
ViewZ VZ26PVM User manual

ViewZ
ViewZ 215LEDSN User manual

ViewZ
ViewZ VZ-50UHD User manual

ViewZ
ViewZ VZ-UNBS SERIES User manual

ViewZ
ViewZ VZ-215IPM User manual

ViewZ
ViewZ VZ-090PM-P User manual

ViewZ
ViewZ VZ-215LED-E User manual

ViewZ
ViewZ VZ-215D2IP User manual

ViewZ
ViewZ VZ-42D2iP User manual

ViewZ
ViewZ VZ-23LED-E User manual

ViewZ
ViewZ VZ-15RTV User manual

ViewZ
ViewZ VZ-185RCR User manual

ViewZ
ViewZ VZ-240PM-PL User manual

ViewZ
ViewZ Smart AD PVM Series User guide

ViewZ
ViewZ TFT-LCD IP PUBLIC VIEW MONITOR User manual

ViewZ
ViewZ VZ-LED SERIES User manual

ViewZ
ViewZ VZ-CMP Series User manual

ViewZ
ViewZ VZ-PVM-Z2B3N User manual

ViewZ
ViewZ TIM Series User manual

ViewZ
ViewZ VZ-RTN series User manual





















