ViewZ VZ-RTN series User manual

LED CCTV MONITOR USER MANUAL

Please read this manual thoroughly before use, and keep it handy for future reference.

17" & 19" PROFESSIONAL

VZ-RTN SERIES

2User ManualVisit the ViewZ USA website at https://www.viewzusa.com

Safety Instrucon

Installaon

Funcon

Trouble Shoong

Mounng Guide

RMA

Specicaon

Warranty

1. Mark Indicaon & Substance

1. Package

2. OSD Control and Funcon

1. Monitor Buon Funcon

2. Warning

2. Interface

3. Cauon

3. Remote Control Funcon

4. Operaonal Temperature & Humidity

5. Dot Defect (dead pixel) of TFT

6. FCC RF INTERFERENCE STATEMENT

CONTENTS

.......................................................................................................................................................................................

.......................................................................................................................................................................................................

...............................................................................................................................................................

..........................................................................................................................................................................................

............................................................................................................................................................................................

..................................................................................................................................................................................................................

...................................................................................................................................................................................................

.......................................................................................................................................................

................................................................................................................................................................................................ ..

..............................................................................................................................................................

................................................................................................................................................................................................

..................................................................................................................................................................................................

..............................................................................................................................................................

.....................................................................................................................................

.....................................................................................................................................................

..........................................................................................................................................

3User Manual Visit the ViewZ USA website at https://www.viewzusa.com

1. Read all warnings.

2. Follow all instrucons to ensure longevity of monitor.

3. Do not place the monitor near water.

4. Clean only with dry cloth.

5. Do not block any venlaon openings. Install in accordance with the manufacturer’s instrucons.

6. Do not install near any heat sources such as radiators, heat registers,stoves, or other heat generang

devices.

7. Do not override the safety purpose of the polarized or grounding-type plug.

8. A polarized plug has two blades with one wider than the other.

9. A grounding type plug has two blades and a third grounding prong.

10. The wide blade or the third prong are provided for your safety.

11. If the provided plug does not t into your outlet, consult with electrician for replacement of the outlet.

12. Protect the power cord from being walked on or pinched parcularly at plugs, convenience receptacles

and the point where it connects to the monitor.

13. Only use aachment/accessories specied by the manufacturer.

14. Use only with the cart, stand, tripod, bracket or table specied by the manufacturer or sold with the

monitor. When a cart is used, use cauon when moving the cart & monitor in combinaon to avoid

injuries.

15. Unplug the monitor during lightning storms or when unused for long periods of me.

16. Refer all servicing to qualied service personnel. Servicing is required when the monitor has been

damaged in any way.

The monitor shall not be exposed to dripping or splashing and objects containing liquids, such as vases

shall be placed near the monitor.

The monitor should have ample distance (e.g. 10cm) from the wall for sucient venlaon.

Important Safety Instruction

SAFETY INSTRUCTION

4User ManualVisit the ViewZ USA website at https://www.viewzusa.com

This symbol is intended to alert the user to the presence of uninsulated & dangerous voltage

within the monitor’s enclosure that may be of sucient magnitude to constute a risk of

electric shock to persons.

This symbol is intended to alert the user to the presence of important operang and

maintenance (servicing) instrucons in the literature accompanying the monitor.

Important Safety Instruction

Mark Indication and Substance

Warning

SAFETY INSTRUCTION

CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL

• Do not use damaged or loose cables and plug.

• Do not pull the plug out by the wire nor touch the plug with wet hands.

• Use only a properly grounded plug and receptacle.

• Do not connect too many extension cords or plugs to one outlet.

• Do not excessively bend the plug and wire.

• Do not disconnect the power cord while it's sll plugged into the monitor.

• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or re.

• Never open the monitor. There are no user-serviceable parts inside and opening will void warranty.

• Removing covers may expose you to dangerous shock hazards or other risks.

• Keep any heang devices away from the power cable and monitor.

• Do not place the monitor near water.

• Do not insert objects of any kind into the monitor's open slots, as they may touch dangerous voltage points.

• Please follow the laws and regulaons of your municipality to dispose the monitor properly.

• Do not use the monitor in high temperature, humid, dusty or oily areas.

• Do not install the monitor where it will be exposed to connual vibraon.

• Keep the plasc packaging out of children’s reach.

• If any damage is detected upon rst opening the box, contact agency from which you bought the monitor directly.

• If your monitor does not operate normally – in parcular, if there is any unusual sound or smell coming from the

monitor – unplug it immediately and contact an authorized dealer or the service center.

5User Manual Visit the ViewZ USA website at https://www.viewzusa.com

Important Safety Instruction

Caution

Available Temperature & Humidity

Dot Defect (dead pixel) of TFT

SAFETY INSTRUCTION

• If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth.

• Make sure to unplug the power cord before cleaning the monitor.

• Make sure to leave a gap between monitor and wall.

• Do not drop the monitor when moving it.

• Place your monitor in a locaon with low humidity and a minimum dust.

• Install the monitor base on a showcase or shelf so that the end of the base does not protrude from the

showcase or shelf.

• Do not place the monitor on an unstable or small surface area.

• Do not install inside a vehicle.

• Disconnect the plug from the outlet during storms or lightning or if it has not been used for a long me.

• Do not try to move the monitor by pulling on the power cord.

• Do not cover the vents on the monitor.

• When moving the monitor, turn o and unplug the power cord. Make sure that all cables, including HDMI

cable and cables connected to other devices, are disconnected before moving it.

• Place the monitor out of children’s reach, as they could damage it by hanging onto it.

• Operang Temperature : 14°F ~ 122°F / -10°C ~ 50°C

• Operang Humidity : 20 ~ 70% RH

ViewZ monitors are manufactured using high-end semiconductor technology with precision rangs of 99.9%

and above. However, it may be the case that certain RGB and white pixels seem darker (or enrely unlit i.e.

black).

Modern producon methods cannot guarantee an absolute fault-free monitor. To this eect, no LED

manufacturer can guarantee a defect free panel. A few isolated pixel or sub-pixel faults are considered

tolerable and dierent policies exist that govern the amount of these tolerable values.

While most pixel faults occur in isolated regions, a cluster of dead pixels or sub-pixels can somemes form for

which a separate ruling applies. A cluster is dened as an area of 5x5 pixels. ViewZ’s policy on pixel failure:

either as an isolated fault or in the form of a cluster is outlined on the website: www.viewzusa.com

6User ManualVisit the ViewZ USA website at https://www.viewzusa.com

Note

FCC RF INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal

installaon.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that

interference will not occur in a parcular installaon.

If this equipment does cause harmful interference to radio or television recepon which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures.

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio, TV technician for help.

• Only shielded interface cable should be used.

Finally, any changes or modicaons to the equipment by the user not expressly approved by the grantee or

manufacturer could void the users authority to operate such equipment.

► DOC COMPLIANCE NOTICE

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the

radio interference regulaon of Canadian Department of communicaons.

7User Manual Visit the ViewZ USA website at https://www.viewzusa.com

The following tools may be required depending on your installaon.

Wall Mount

Your ViewZ monitor is shipped with all proper installaon hardware and components. If there are parts missing

and/or damaged, please stop the installaon and contact ViewZ USA at (888)-998-4399.

Your ViewZ monitor is compable with ViewZ monitor mounts. For more informaon, please contact ViewZ USA at (888)-998-4399.

Electronic Stud Finder Protecve Eye-wearPencil Level Phillips Screwdriver

Assembly Components - provided

Mounting Option

Installation Tools

TFT-LED Monitor (Qty 1)

Monitor Stand (Qty 1)

110V Power Cable (Qty 1)

Power Supply (Qty 1)

HDMI Cable (Qty 1) User Manual (Qty 1)

Remote Controller (Qty 1)

INSTALLATION

LED CCTV MONITOR USER MANUAL

Please read this manual thoroughly before use, and keep it handy for future reference.

19.5", 21.5" and 23.6" VALUE

• Part # • Part # • Part #

WM05 WM11 AM01VESA 50, 75, 100 Tilng -70° ~ +70°

15mm Low prole Swivel 180°

Tilng -70° ~ +70°

Swivel 180°

8User ManualVisit the ViewZ USA website at https://www.viewzusa.com

The following image is the descripon of interface input ports of BNC Monitor

Interface Input Ports

CONNECT EXTERNAL EQUIPMENTS

q ew r t y

1. DC 12V IN

2. HDMI IN

3. VGA IN

4. BNC (Composite) IN

5. BNC (Composite) OUT

6. Audio IN / OUT

9User Manual Visit the ViewZ USA website at https://www.viewzusa.com

Remote Controller

REMOTE FUNCTION

1. Power

2. Picture

3. Freeze

4. Up

5. Le

6. Menu

7. Right

8. Down

9. Mute

10. Input

11. VGA Input Select

12. YPbPr Input Select - N / A

13. HDMI Input Select

14. AV Input Select

15. S-Video Input Select - N / A

16. DVI Input Select - N / A

Display image, sound and custom sengs can be adjusted in OSD (On Screen Display) menu by remote controller.

To adjust monitor seng value :

1. Press the 'MENU' buon to enter the OSD menu

2. Press the 'INPUT' buon to select input source

3. Press the 'FREEZE' buon to freeze current display image On / O - only available on the remote controller

4. Press the ▲ / ▼ buons to select the desired sub-menu. The selected submenu will be highlighted

5. Press the 'MENU' buon to enter the sub-menu for adjusng items

6. Change the value you wish to adjust by using the ◄ / ► buons

7. Press the 'MENU' buon to conrm / exit for saving adjustment value on sub-menu

8. Without entering OSD MENU, press ◄ / ► buons to adjust the audio volume

9. Without entering OSD MENU, press HDMI, AV & VGA buons to select desired input source

10. Press the 'MUTE' buon to on / o audio - audio only works with VGA / AV input

10 User ManualVisit the ViewZ USA website at https://www.viewzusa.com

All picture, sound sengs and setup can be adjusted in OSD (On Screen Display) menu.

To adjust the OSD screen:

1. Press the MENU buon to enter the OSD MENU

2. Press the ◄ / ► buons to select the desired main-MENU. The selected main -MENU is highlighted

3. Press the SOURCE buon to select the desired sub-MENU. The selected sub-MENU is highlighted

4. Change the value you wish to adjust by using the ◄ / ► buons

5. Press the MENU buon to conrm the adjustment on sub-menu

6. Press the MENU buon to exit the sub-MENU and go back to the main-MENU

7. Press the MENU buon to exit the OSD MENU

CONTROL AND FUNCTION

q w e r ty

1. Source

Select an input source

2. Le & Right ◄(VOL) ►

Change the value on selected menu

3. Menu

Enter or exit the OSD / Select a menu on OSD

4. Power

Monitor power on / o

On Monitor, Button Control

Monitor Button Function

5. LED Indicator

Green color: monitor on

Red color : monitor o

6. IR Receiver

Table of contents

Other ViewZ Monitor manuals

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual