Viessmann VITOTROL 200 RF User manual

Operating instructions

for the system user

VIESMANN

Wireless remote control for one heating circuit

VITOTROL 200 RF

5592 697 GB 3/2011 Please keep safe.

Please follow these safety instructions closely to prevent accidents and mate-

rial losses.

Safety instructions explained

Danger

This symbol warns against the

risk of injury.

!Please note

This symbol warns against the

risk of material losses and envi-

ronmental pollution.

Note

Details identified by the word "Note" con-

tain additional information.

Target group

These operating instructions are for the

heating system user.

This unit is not designed to be used by

persons (including children) with limited

bodily, sensory or mental capacities, or

lacking experience and/or lacking knowl-

edge, unless they are supervised by a

person responsible for their safety, or

have received instructions from such a

person as to how to use the unit.

!Please note

Children should be supervised.

Ensure that children do not play

with the unit.

Danger

Incorrectly executed work on the

heating system can lead to life-

threatening accidents.

■ Work on gas appliances must

only be carried out by a regis-

tered gas fitter.

■ Work on electrical equipment

must only be carried out by a

qualified electrician.

If you smell gas

Danger

Escaping gas can lead to explo-

sions which may result in serious

injury.

■ Do not smoke. Prevent naked

flames and sparks. Never

switch lights or electrical appli-

ances ON or OFF.

■ Close the gas shut-off valve.

■ Open windows and doors.

■ Remove all people from the

danger zone.

■ Notify your gas or electricity

supplier and your heating con-

tractor from outside the build-

ing.

■ Shut off the electricity supply to

the building from a safe place

(outside the building).

Safety instructions

For your safety

5592 697 GB

If you smell flue gas

Danger

Flue gas can lead to life-threat-

ening poisoning.

■ Shut down the heating system.

■ Ventilate the boiler room.

■ Close all doors in the living

space.

In case of fire

Danger

Fire creates the risk of burning

and explosions.

■ Shut down the heating system.

■ Close the shut-off valves of the

fuel lines.

■ Use a tested fire extinguisher,

class ABC.

Boiler room requirements

!Please note

Incorrect ambient conditions can

lead to damage to the heating

system and put the safe opera-

tion at risk.

■ Ensure ambient temperatures

above 0 ºC and below 35 ºC.

■ Prevent air contamination by

halogenated hydrocarbons

(e.g. as contained in paints,

solvents or cleaning fluids) and

excessive dust (e.g. through

grinding/polishing work).

■ Avoid continuously high humid-

ity levels (e.g. through frequent

drying of washing).

■ Never close existing ventilation

apertures.

Ancillary components, spare and

wearing parts

!Please note

Components that are not tested

with the heating system may lead

to damage to the heating system,

or may affect their various func-

tions.

Installation or replacement work

must only be carried out by quali-

fied personnel.

Safety instructions

For your safety (cont.)

5592 697 GB

Introductory information

Commissioning..................................................................................................... 5

Terminology.......................................................................................................... 5

Tips on saving energy.......................................................................................... 6

Operation

Operating information........................................................................................... 7

Controls................................................................................................................ 7

Central heating

Required settings................................................................................................. 9

Setting the room temperature for standard heating mode................................... 9

Setting the heating program................................................................................. 9

Comfort and energy saving functions.............................................................. 10

What to do if...

Rooms are too cold.............................................................................................. 12

Rooms are too hot................................................................................................ 12

There is no hot water............................................................................................ 13

" " is displayed.................................................................................................... 13

" " and " " are displayed............................................................................... 13

is displayed........................................................................................................ 14

Changing the batteries......................................................................................... 14

Appendix

Terminology.......................................................................................................... 16

Keyword index.................................................................................................... 18

Index

5592 697 GB

Your remote control is connected to the

Vitotronic control unit of the boiler by

means of a wireless connection. The

commissioning and adjusting of the

Vitotronic control unit to local conditions

and to the structural characteristics of

the building, plus the instruction of the

user in operating the system, must be

carried out by your heating contractor.

The settings made at the Vitotronic con-

trol unit are transferred to the remote

control during commissioning. The

Vitotronic control unit is factory-set to

"Heating and DHW".

In other words, the rooms that you are

controlling with your remote control are

heated in accordance with the time pro-

gram that has been set at the Vitotronic

control unit, alternating between stand-

ard and reduced room temperature.

DHW heating will also take place in

accordance with the settings from the

Vitotronic control unit.

Power failure

■ All data is saved if there is a power

failure.

Terminology

To provide you with a better understand-

ing of the functions of your remote con-

trol unit, the appendix contains a chapter

entitled "Terminology".

Introductory information

Commissioning

5592 697 GB

Use the setting options offered by the

remote control:

■ Never overheat your rooms. Every

degree by which the room temperature

is reduced saves up to 6 % on heating

costs.

Never set your room temperature

higher than 20 °C.

■ Select the heating program that meets

your current requirements:

– For short absences (e.g. shopping

trips), select economy mode (see

page 10).

As long as economy mode is activa-

ted, the room temperature is

reduced.

– In the summer, if you do not want to

heat any rooms but require hot

water, select the heating program

(see page 9).

– If you do not want to heat any rooms

and require no hot water for a pro-

longed period of time, select (see

page 9).

Further recommendations:

■ Correct ventilation.

Briefly open windows fully and at the

same time close the thermo-

static valves.

■ Close roller shutters (if installed) at

dusk.

■ Set thermostatic valves correctly.

■ Never cover radiators or thermo-

static valves.

■ Controlled DHW consumption: A

shower generally uses less energy

than a full bath.

Introductory information

Tips on saving energy

5592 697 GB

The Vitotrol 200 RF remote control unit

enables the following adjustments to be

made from the living space:

■ Standard room temperature

■ Heating program

All other settings are transferred from the

Vitotrol 200 RF to the Vitotronic control

unit and vice-versa. The most recent

adjustments always apply to your heat-

ing circuit.

Controls

+ Increases the standard room tem-

perature.

– Reduces the standard room tem-

perature.

/ You set the heating program.

OK You confirm your selection or set-

ting.

You activate party mode.

You activate economy mode.

Operation

Operating information

5592 697 GB

AHeader (heating program display)

BCurrent outside temperature

CCurrent room temperature (actual

room temperature)

Symbols on the display

These symbols are not permanently dis-

played, but appear subject to the system

version and the operating state.

Heating program (display in the header)

Standby mode with frost protec-

tion monitoring

DHW heating only

Central heating and DHW heating

Party mode active

Economy mode active

/ Heating program settings

Displays

Frost protection monitoring

Central heating with standard

room temperature

Central heating with reduced tem-

perature

Heating circuit pump runs

Holiday program enabled

In conjunction with a solar thermal

system:

Solar circuit pump runs

When selecting the set room tem-

perature

Wireless connection (transmitting

icon)

Quality of the wireless connection

(see page 13)

Messages

Fault message

Operation blocked, except activating

party mode

Change the batteries (see

page 14)

Operation

Controls (cont.)

5592 697 GB

If you want central heating, check the

following points:

■ Have you set the required room tem-

perature (set room temperature)?

■ Have you set the correct heating pro-

gram?

For settings, see the next chapter.

Setting the room temperature for standard heating mode

Factory setting: 20 °C

Press the following keys:

1. +/– for the required set room tem-

perature.

2. OK to confirm.

The display shows the current

room temperature (actual room

temperature).

Setting the heating program

Factory setting:

" " for central heating and DHW heat-

ing (winter mode).

Heating programs:

Standby mode with frost protec-

tion monitoring

Only DHW heating (summer

mode)

Central heating and DHW heating

Press the following keys:

1. / the symbol for the current heat-

ing program flashes.

2. / until the symbol for the required

heating program flashes.

3. OK to confirm.

Central heating

Required settings

5592 697 GB

Selecting comfort mode

With this function, you can change the

room temperature for several hours, e.g.

if guests unexpectedly stay longer in the

evening. With this function, DHW is

boosted to the set temperature selected

at the Vitotronic control unit.

1. If you want to select a different room

temperature during party mode:

Set the required room temperature

(see chapter "Setting the room tem-

perature").

Note

This value is retained even after party

mode is terminated.

2. Press .

Terminating the comfort function

■ Press

■ Automatically after 8 hours

■ Automatically when the system

switches to standard heating mode in

accordance with the time program

selected on the Vitotronic control unit.

Selecting energy saving function "Economy mode"

To save energy, you can reduce the

room temperature in standard heating

mode ( must be shown on the display).

For example, if you leave the house for

a few hours.

Note

Economy mode cannot be selected

whilst operating with reduced room tem-

perature.

Press .

Comfort and energy saving functions

5592 697 GB

Other manuals for VITOTROL 200 RF

Table of contents

Other Viessmann Remote Control manuals

Viessmann

Viessmann Vitotrol 200 User manual

Viessmann

Viessmann Vitotrol 300-B Operating instructions

Viessmann

Viessmann Vitocom 100 Quick guide

Viessmann

Viessmann VITOTROL 300A Quick guide

Viessmann

Viessmann Vitocom 100 Quick guide

Viessmann

Viessmann VITOTROL 200-E Quick guide

Viessmann

Viessmann F remote control User manual

Viessmann

Viessmann VITOTROL 200A Service manual

Viessmann

Viessmann VITOTROL 300 RF Quick guide

Viessmann

Viessmann Vitotrol 300-B Operating instructions

Viessmann

Viessmann 8402 User manual

Viessmann

Viessmann Vitocom 100 Operating instructions

Viessmann

Viessmann VITOTROL 200-E User manual

Viessmann

Viessmann VITOTRONIC 200 Instruction manual

Viessmann

Viessmann VITOTROL 200 RF Quick guide

Viessmann

Viessmann VITOTROL 300 RF User manual

Viessmann

Viessmann VITOTROL 200-E User manual

Viessmann

Viessmann VITOTROL 200 RF User manual

Viessmann

Viessmann Vitocom 100 Quick guide

Viessmann

Viessmann Vitocom 100 User manual

Viessmann

Viessmann VITOTROL 100-E User manual

Viessmann

Viessmann Vitotrol 300 User manual

Viessmann

Viessmann VITOTRONIC 200 User manual

Viessmann

Viessmann Vitotrol 350 Quick guide

Popular Remote Control manuals by other brands

Panasonic

Panasonic EUR7622KB0 Operation guide

Bang & Olufsen

Bang & Olufsen Beo4 user manual

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 user manual

Multiplex

Multiplex PROFI TX 9 instructions

One Remote

One Remote RMB4 user manual

FUTABA

FUTABA 9ZAP - PART2 manual

HR Matic

HR Matic HR MULTI 3 quick start guide

Yamaha

Yamaha ACC-GNRST-30-20 installation instructions

EisSound

EisSound KBSOUND user manual

Marantz

Marantz RC101 user guide

Conrad

Conrad FS20 TC6 operating instructions

Anritsu

Anritsu MP1777A Operation manual

Niles

Niles WVC100 Installation & operating guide

RCA

RCA RCU1300 manual

Bang & Olufsen

Bang & Olufsen BEO6 Getting started

GE 94901 instruction manual

Onbon

Onbon YQ1-75 user manual

FUTABA

FUTABA R7108SB Full manual