VIBIA Wind User manual

VIBIA LIGHTING, S.L.U. Barcelona, 72 - 74. 08820 El Prat de Llobregat (Barcelona - Spain). Tel 934 796 970. Fax 934 796 973.

[email protected] www.vibia.com

WIND

Design von Jordi Vilardell.

Referenz

4055.

Anwendung

Außenleuchten

Installationstyp

Aufbau

Beschreibung

Stehleuchte für den Außenbereich. Das Design von Jordi Vilardell ist in Grün, Orange, Weiß

und Schwarz verfügbar. Durch die Wahl des Materials – mittels innovativen

Filament-Winding-Verfahrens industriell hergestellte Glasfasern – werden bei dieser

Kollektion Technik und Tradition gekonnt miteinander verbunden.

Diffusor

Diffuser aus Metacrylat

Finish

4055-03.

Weiss

4055-04.

Schwarz

4055-07.

Grün

4055-08.

Orange

Skizze

Elektrische Eigenschaften

1 x 2GX13 230V 40W (T5C) Total 40,0 W

Physische

2 Box / 0,60 x 0,60 x 2,11 m. / Vol. 1,0300 m³ /

Bruttogewicht 45,1 kg. / Nettogewicht 27,8 kg.

Installation und Montage

Den Anweisungen der Installationsanleitung folgen

Lichtverteilung

Allgemeine Beleuchtung

Beleuchtungskörper für die allgemeine Beleuchtung, der das Licht gleichmäßig in alle

Richtungen verteilt.

Fotometrische Daten

Effizienz : 30.72%

Koordinatensyst. : C-G

Gesamtfluss : 3200.00 lm

Maximalwert : 124.39 cd/klm

Maximalwert : C=0.00 G=0.00

Bi-symetrisch : 3

Isolux (Boden) : Isolux (Suelo)

Position Lichtquelle :

X=0.00m Y=0.00m Z=1.90m

Rotation Lichtquelle :

Zertifikate

4055

1 Shade's screws 4 un.

2 Allen key 2 un.

3 Lamp structure 1 un.

4 Shade 1 un.

Wind

Design by Jordi Vilardell

ASSEMBLY I STRUCTIO S

SUPPLIED MATERIAL

4055. et Weight 27,8 Kg

1 x T-5 Circline 2GX13 40W

Class I. Product with an additional protection cable (grounds).

Dust-tight product. Protected against water spray.

Product that CA be in contact with normally-flammable materials

(wood or others).

-If you wish to fix the lamp to the ground, choose the most adequate plugs and screws depending on the surface.

-Before the installation, make sure the installation surface will not be damaged. If this happens, it will be the installator´s responsibility.

-If the steel cable or the power cord of this lamp is damaged, it must be replaced only by the manufacturer or their technical service or by a person capacitated to this effect to avoid

any risk.

Caution

Before assembling and installing this roduct, carefully read the following:

-Switch of the mains before installing the lamp.

-Always use the recommended bulb

TECH ICAL SPECIFICATIO S

3r d

2nd

3rd

2nd

OTE

: Please, follow these instructions just in case you need to fix the lamp to the ground. If you

do not need it to be fixed to the ground, skip steps 1 through 3 and go directly to step 4.

1. Disassemble the base (A) as follows:

Remove the two screws (B) using the supplied Allen wrench.

Hold the lamp (C) firmly and move it toward the cable (as shown by the arrow) until it comes

loose from the fixing plate (D).

Pull upwards to completely release it from the base (A)

Important: Do not do this if the lamp is leaning or lying on the ground. It must be vertical.

2. Fix the base (A) to the ground using the most adequate screws and plugs (not supplied).

3. Replace the lamp (C) following the instruction of step 1 backwards, making sure the lamp is

firmly joined to the anchorage device (D), and fix it in place by tightening the screw (B) with

supplied allen key.

4. After installing the fluorescent bulb, fix the shade (E) in place using its 4 screws (F) (supllied in

a bag), using the supplied Allen wrench.

ASSEMBLY I STRUCTIO S

Maintenance

-Use a slightly-wet cotton cloth for cleaning.

-In case of malfunction or damage, please contact the retailer who sold the lamp.

Other manuals for Wind

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual