Viavito FT100X User manual
Owner’s Manual.
4ft Folding
Football Table
FT100X
www.viavito.com
Manual version 2.1
02 www.viavito.com
Congratulations
on purchasing your
very own FT100X
Folding Football Table
Manual Contents.
You have chosen a high-quality, safe and
innovative product, and we are certain
it will keep you entertained for hours.
Please take the time to read this owner’s
manual as it will help you to get the most
out of your new product.
For more information, or if you require
any assistance please email us at
support@viavito.com
Safety Information 03
Assembly 04/14
Contents Checklist 04
Assembly Instructions 05/11
Folding & Storage Instructions 12/14
Customer Support 15/16
Contact Information 15
Manufacturer’s Warranty 16
Technical Information 17/19
Parts List 17/18
Exploded Diagram 19
03www.viavito.com
Safety Information.
• Please read all instructions carefully
before using this product.
• Retain this manual for future reference.
• The specications of this product may
vary slightly from the illustrations and are
subject to change without notice.
IMPORTANT SAFETY NOTICE:
note the following precautions
before using the product.
01 Assemble the product exactly as per the
instructions in this manual.
02 Check all the screws, nuts and other
connections before using the table for the
rst time and ensure that it has been built
correctly and is safe to be used.
03 Set up the table in a dry, level place and
keep it away from moisture and water.
04 DO NOT use cleaning products such as
detergents. To clean the table only use a
clean cloth.
05 This product is for home use only.
If used outside, it must be stored indoors
after use.
If you don’t like instruction manuals, then
check out our step-by-step assembly video
here:
https://www.youtube.com/watch?v=Fz-
r_9DU-V9Q
#1
5/16''handle bolt
4 pcs 5/16''X1-1/2'' bolt
2 pcs
1/4''X1-1/2'' bolt
8 pcs
3/16''*1-3/4'' bolt
8 pcs
5/16'' washer
6 pcs
1/4'' washer
8 pcs 3/16'' washer
8 pcs
nut
8 pcs 4 pcs
#2 #3 #5#4
#6 #7 #8 #10#9
#11 #12 #13 #15#14
#16 #17 #18 #20#19
F3.5X*1-1/2'' flat head
screw
4 pcs
8 pcs
cross bar
1 pc
tool
1 pc 2 pcs
1 home players rod
1 pc 3 home players rod
2 pcs
4 home players rod
1 pc
1 away players rod
1 pc
3 away players rod
2 pcs
4 away players rod
1 pc
#21 #22 #23 #25#24
side panel
2 pcs
end panel
2 pcs
playing field
1 pc
playing field support
brace
2 pcs
#26 #27 #28 #30#29
leg A/B
2 pcs
leg A/B
2 pcs
leg panel A
1 pc leg panel B
1 pc
rod handle
8 pcs
#31 #32 #33 #34 #35
8 pcs 8 pcs 8 pcs 2 PCS 2 pcs
4 pcs
slide scorer
04 www.viavito.com
Assembly.
Contents Checklist Make sure you have the following parts:
T3.5X*1” round head
screw
T3.5X*5/8” round head
screw
T3.5X*1-3/4” round
head screw
ball
#22
side panel
2 pcs
#24
playing field
1 pc
#22
#24
#22
05www.viavito.com
01 Slide the playing eld (#24) into the grooves on the two side panels (#22).
Assembly Instructions
Step One.
Please feel free to check out our step-by-step assembly video here:
https://www.youtube.com/watch?v=Fzr_9DU-V9Q
1/4''X1-1/2'' bolt
8 pcs
#3
1/4'' washer
8 pcs
#6 #23
end panel
2 pcs
#22
#23
#6 #3
#3
#6
#24
06 www.viavito.com
Step Two.
01 Loosely attach one end panel (#23) to
the two side panels using 4 bolts (#3)
and 4 washers (#6).
02 Make sure the playing eld is slotted
into the grooves on both of the side
panels.
03 Now loosely attach the other end panel
to the two side panels using the bolts
(#3) and washers (#6).
04 Tighten all the bolts using the supplied
Allen key
#11
8 pcs
#12
4 pcs
#34
2 PCS
#11 #34
#12
#25
#9
#25
2 pcs 4 pcs
#9
playing field support
brace
07
www.viavito.com
T3.5X*1-3/4” round
head screw
Step Three.
01 Centre the playing eld by pulling it
gently towards one end until your
ngers meet the edge of the piece of
wood underneath.
02 Push the support braces (#25) down,
noting that they do not sit at against
the playing eld, and align them with
the holes on each side as shown in the
diagram. Fix them in place from the
outside of the table using the screws (#6).
03 Place the goals (#34) so they sit against
the end panel and the playing eld,
aligning them between the two screw
holes on the playing eld. Fix the goals
in position using the screws (#12).
04 Fix the playing eld in place using 4
screws (#11) for each end in the pre-
drilled holes.
#1
5/16''handle bolt
4 pcs 5/16''X1-1/2'' bolt
2 pcs
#2
3/16''*1-3/4'' bolt
8 pcs
#4
5/16'' washer
6 pcs
#5
3/16'' washer
8 pcs
#7
#13
cross bar
1 pc
#26
leg A/B
2 pcs
#27
leg A/B
2 pcs
#28 #29
leg panel A
1 pc
leg panel B
1 pc
nut
8 pcs
#8
#1
#5
#4
#7
#4
#7
#5
#2
#13
#26A
#26B
#27A
#27B
#28
#29
#8
#8
08 www.viavito.com
Step Four.
01 Loosely attach the two straight legs
(#27A/B) to the side panels using the
handle bolts (#1) and washers (#5).
02 Attach leg panel A (#28), which is the
larger of the two leg panels, to the two
legs using the bolts (#4), the washers (#7)
and the Allen Key. The logo on the panel
should face outwards and be upside down
at this stage so it is the right way up once
the table is upright. Then tighten the
handle bolts to secure the legs in place.
03 Loosely attach the other two legs
(#26A/B) to the side panels with the
feet pointing outwards, using the
handle bolts (#1) and washers (#5).
04 Attach leg panel B (#29) between the
vertical parts of the legs using the
bolts (#4), the washers (#7) and the
Allen Key, again with the logo facing
outwards and upside down.
05 Fix the cross bar (#13) between the
horizontal part of the feet using the
bolts (#2), the washers (#5) and the
Allen Key. Then tighten the handle
bolts to secure the legs in place.
09
www.viavito.com
CAUTION!
1: It is recommended that two adults turn the table over.
2: Take hold of the table as shown.
3: Turn the table over.
4: Place the table on all four feet at the same time.
Take hold of the
table.
DO NOT hold the
table by the legs.
DO NOT lean the table
on its legs.
#16 #17 #18 #20#19
1 home players rod
1 pc
3 home players rod
2 pcs
4 home players rod
1 pc
1 away players rod
1 pc
3 away players rod
2 pcs
4 away players rod
1 pc
#21 #31 #32 #33
8 pcs 8 pcs 8 pcs
#31
#31
#33
#33
#32
#22
#22
10 www.viavito.com
Step Five.
01 Each side has 4 player rods to be set in
a 1-3-4-3 formation. The correct layout
starting at either end is 1 home player,
3 home players, 3 away players, 4 home
players, 4 away players, 3 home players,
3 away players, 1 away player.
02 Insert the player rod into the
corresponding hole with a plastic loop in
the side panel. Insert it from the inside
through the hole ensuring the players
face forward. Then take a metal rod,
inserting it through the outside of the
matching hole on the other side panel,
with the at end which has a hole in it
on the outside of the table. Slide a foam
circle and then a plastic washer onto
the inner end of the metal rod and then
thread it into the player rod. Leave it
resting as it is and repeat this process
for all player rods for both teams.
03 To x the rods in place, take the metal
rod out of the hole and bring it into the
table. Place the rod bushing (#33) onto
the metal rod, aligning it with the at
end, and then x it in place with the
other bushing with the pin (#32). Push
the rod back into the hole in the side
panel and screw in the square head
bushing (#31). Repeat this process for
all the rods.
Table of contents
Other Viavito Accessories manuals
