Vertiv Liebert GXT5-500LVRT2UXL User manual

LIEBERT® GXT5™ UPS

120‑V500–3,000VA

Quick Installation Guide

590-1932-501A/SL-70307_REV0 1

I M P O R TAN T: Before installing,

connecting to supply or operating

your Liebert GXT5 UPS, please

review the Safety and Regulatory

Statements sheet. For detailed

installation, operating, maintenance

and troubleshooting info

rmation refer to the GXT5 User

Guide for your model available at

www.VertivCo.com.

INSTALLATION

1. Inspecting the UPS

Inspect the UPS for any signs of

obvious damage. If damage is

visible, do not proceed and call

our warranty support line for

assistance at 1-800-222-5877

menu option 3, or email at

microups.[email protected].

2. Choosing a location

Install the UPS in a temperature-

controlled environment that is

free of corrosive and conductive

contaminants. Avoid locations

near heat or water sources and

exposed to direct sunlight.

For proper ventilation, leave four

inches clearance on all sides of

the UPS.

The input outlet should be

nearby and easily accessible.

3. Installing the UPS

The UPS and optional External

Battery Cabinets may be

installed in either a tower or rack

conguration. For tower

installation, assemble and attach

the tower support stands. For

rack installation, attach the

brackets to the UPS, install the

rail kit in the rack if needed, and

install the UPS in the rack.

NOTE:

This UPS is not for use in a

computer room as dened in the

standard for the protection of

electronic computer/data

processing equipment of ANSI/

NFPA 75.

MODEL DESIGN CONFIGURATIONS

GXT5‑500/750/1000/1500LVRT2UXL

GXT5‑2000LVRT2UXL

GXT5‑3000LVRT2UXL

1 4 7 5 6

2 9

310 8

1 4

5 6

2 9

310

1 4

5 6

2 9

310

GXT5 UPS

#Description #Description

1Liebert® IntelliSlot™ port 7Input circuit breaker

2USB port 8Input-power plug and cable

3RS-485 port 9RS-232 port

4External-battery connector 10 Terminal-block

communication connectors

5Non-programmable

output receptacles 11 Output-power plug and cable

6Programmable

output receptacles 12 Output circuit breaker

LIEBERT® GXT5™ UPS 120-V 500 – 3,000 VA

Quick Installation Guide

2 590-1932-501A/SL-70307_REV0

CONNECTIONS

4. Connecting External

Battery Cabinet

(Optional)

External battery cabinets

(EBC) provide longer battery

run-time for connected

devices. Refer to GXT5 User

Guide, to select the appropriate

model and quantity for your

GXT5 model and applications.

• Verify that the EBC breaker

is in the “O” position.

• Connect one end of the

supplied EBC cable to the

UPS and one end to the

battery cabinet. If

connecting more than one

external battery, connect

one end of the external

battery cable to the second

connector on the battery

cabinet, then connect the

other end to the next

battery cabinet.

5. Connecting the UPS

to Receptacle

The UPS is cord and plug

connected using a L6-30P

input plug. Perform all wiring in

accordance to all local and

national electrical codes.

The

UPS is equipped with

output receptacles. Connect

the equipment to be protected

to the output receptacles.

NOTE: Allow the batteries to

charge at-least 8 hours before rst

start-up to ensure adequate

back-up time. The batteries charge

when the UPS is connected to AC

input regardles of the o/on status

of the UPS.

POWERING THE UPS

NOTE: Do not start the UPS until

after the installation has been

nished, the system is

commissioned by an authorized

engineer, and the external input

circuit breakers have been closed.

1. If an optional POD is installed,

make sure the bypass switch is

in “UPS” position.

2. Make sure the breaker

supplying power to the UPS is

closed, and close the input

breaker on the rear of the UPS.

EBC terminal

GXT5TM UPS to External Battery Cabinet Connections

GXT5‑3000LVRT2UXL

Shown

Single/First EBC

Second EBC

WIRING

Model Recommended external over-current protection

(Maximum)

GXT5-500LVRT2UXL

GXT5-750LVRT2UXL

GXT5-1000LVRT2UXL

12 A

GXT5-1500LVRT2UXL 15 A

GXT5-2000LVRT2UXL 20 A

GXT5-3000LVRT2UXL 30 A

LIEBERT® GXT5™ UPS 120-V 500 – 3,000 VA

Quick Installation Guide

590-1932-501A/SL-70307_REV0 3

3. If necessary, use the LCD

display or a connected

computer to make any required

settings. (Refer to the User

Guide for conguration set up.)

4. Close all output breakers on the

rear of the UPS (or in an

external panel board, if used).

5. If external battery cabinets are

included, close the breakers on

the rear of each cabinet.

6. Power-on the UPS using the

Operation and Display Panel

(see the illustration to the right)

by pressing and holding the

power button until the

conrmation dialog appears.

Use the Up/Down arrows to

select “YES”, then press Enter.

NOTE: During operation, the UPS

may sound an alarm as the output

receptacles are powered. You may

press the Esc button for 2 seconds

to silence the audible alarm.

Display

screen

Power

Operation and Display Panel

Run

Alarm

Enter

Down

Escape

To contact Vertiv Technical Support: visit www.VertivCo.com

trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no

responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specications are subject to change without notice.

4 590-1932-501A/SL-70307_REV0

Other manuals for Liebert GXT5-500LVRT2UXL

This manual suits for next models

Table of contents

Other Vertiv UPS manuals

Vertiv

Vertiv Liebert APS User manual

Vertiv

Vertiv Liebert EXM User manual

Vertiv

Vertiv Liebert EXS User manual

Vertiv

Vertiv 10H92873 User manual

Vertiv

Vertiv Liebert ITA2 User manual

Vertiv

Vertiv Liebert NXL Series User manual

Vertiv

Vertiv Liebert EXM series User manual

Vertiv

Vertiv Liebert GXT5-500LVRT2UXL User guide

Vertiv

Vertiv Liebert ITA2 User manual

Vertiv

Vertiv GXT4-5000RT230 Installation and maintenance instructions

Vertiv

Vertiv Liebert EXM TXC User manual

Vertiv

Vertiv Liebert EXM User manual

Vertiv

Vertiv Liebert GXT5-5000MVRT4UXLN Installation and maintenance instructions

Vertiv

Vertiv Liebert EXM User manual

Vertiv

Vertiv Liebert Installation and maintenance instructions

Vertiv

Vertiv Liebert EXL User manual

Vertiv

Vertiv Liebert EXM2 User manual

Vertiv

Vertiv Liebert GXT5 User manual

Vertiv

Vertiv Liebert GXT4 Series Installation and maintenance instructions

Vertiv

Vertiv LIEBERT PSI5 Series User manual

Vertiv

Vertiv Liebert APM Plus User manual

Vertiv

Vertiv Liebert GXT5 User manual

Vertiv

Vertiv Liebert Trinergy Cube Instruction Manual

Vertiv

Vertiv Liebert ITA2 30kVA User manual

Popular UPS manuals by other brands

Pylontech

Pylontech Victron & Pylontech US5000 manual

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 user manual

Mecer

Mecer ME-1000-WTU user manual

Mustek

Mustek PowerMust 530(B) Plus Startup manual

Emerson

Emerson Liebert NXL series Operation and maintenance manual

MAKELSAN

MAKELSAN BOXER SERIES user manual

Block

Block PC-0524-400-0 manual

CyberPower

CyberPower CP585LCD user manual

Eaton

Eaton 3S Advanced user's guide

CyberPower

CyberPower Office Tower Series UPS 1000 user manual

CyberPower

CyberPower BM100 quick start guide

Best Power

Best Power 610 quick start guide

Best Power

Best Power Unity/I UT3K user manual

Mustek

Mustek PowerMust 400 Offline user manual

Xantrex

Xantrex Trace 512 UR-UPS owner's manual

Forza

Forza SL-1501UL user manual

LEGRAND

LEGRAND keor 310081 quick start guide

ABB

ABB Conceptpower DPA 500 operating manual