Verilux VF01 User manual

VF01

Dear Customer,

Thank you for purchasing the Verilux®Original Deluxe Natural

Spectrum®Floor Lamp. You have received a quality product,

backed by a three-year limited warranty. As a Verilux®customer,

your satisfaction means everything to us. We look forward to

serving you now and in the future.

Many other healthy lighting products are available

through our catalog and online. Please visit us on the web at

www.Verilux.com to learn about other great Verilux®products.

Have a Bright Day!

Nicholas Harmon

President and CEO

SAVE THESE INSTRUCTIONS

Thank you for purchasing the Original Natural Spectrum®Deluxe Floor Lamp.

Please read the following safety information before using. To reduce the risk of

ﬁre, electrical shock, or injury to persons:

• Do NOT dismantle.

• Do NOT alter power cord.

• Turn off/unplug and allow to cool before replacing bulb or cleaning.

• For indoor use only.

• The lamp is an electrical device. DO NOT USE NEAR WATER

IMPORTANT SAFETY INSTRUCTIONS

GENERAL PRECAUTIONS

• Before plugging in the lamp, check to make sure the voltage corresponds

with the main voltage of your location (120 volts).

• Do not use the lamp outside or in wet locations such as bathrooms. It is

intended for indoor, dry use only.

• Not for use with light dimmers, timers, motion detectors or extension cords.

• This product may cause interference with radios, cordless telephones,

or devices that use a wireless remote control, such as televisions. If

interference occurs, move the product away from the device, plug the

product or device into a different outlet, or move the lamp out of the line of

sight of the remote control receiver.

• The light bulb may become loose during transit. To reinstall the light bulb,

see the bulb installation instructions on page 8.

• Do NOT use lubricating agent in assembly; please see troubleshooting

section if you are having difﬁculty assembling your lamp.

• Unplug from electrical outlet for extended periods of non-use or during

lightning storms to ensure protection of the electronics.

GETTING STARTED

Main Parts & Controls

A. Lamp Head

B. Gooseneck

C. Shaft

D. Lamp Base

E. Power Cord

F. Polarized Plug

G. Parabolic Grid Diffuser

H. Bulb

I. High/Off/Low Switch

Close-up of Lamp Head

Attention!

DO lift your lamp by the shaft. DO NOT lift the lamp by the gooseneck.

1. Remove all pieces from box.

Locate 2 screws and tightening tool.

2. Detach red plastic pieces and store them in the event you need to

return the lamp.

3. Important: To avoid scratching the metal shaft, do not use a sharp

object to cut the plastic covering. The clear plastic covering on the

shaft is specially designed to tear away easily.

UNPACKING YOUR LAMP

IMPORTANT NOTE:

Remove red plastic protective pieces prior to assembly.

ASSEMBLY INSTRUCTIONS

Read Instructions Carefully Before Assembly:

1. Remove lamp from box and packaging. Remove

red plastic protective pieces from lamp shaft.

NOTE: Please save original packaging for

repacking should you need to return the

product.

2. Set lamp base on the ﬂoor and insert

the lamp shaft over the base support

part until the screw holes line up as

shown in Fig.1. Insert the screw using

the tightening tool and turn clockwise to

tighten. We recommend assembling the

base ﬁrst before lamp head.

3. Attach the lamp head gooseneck to the

shaft, tucking the wire into the shaft, until

the screw holes line up as shown in Fig.1.

Insert the screw using the tightening tool

and turn clockwise to tighten. Should you

have difﬁculty lining up the base or head

screw holes, refer to the troubleshooting

section of this manual.

Close-up of screw hole

in the lamp base

ASSEMBLY INSTRUCTIONS cont.

4. Attaching the Parabolic Grid Diffuser

• Remove grid diffuser from protective plastic bag

• Insert plastic pegs at bottom of grid diffuser into openings near bulb

socket

• Snap tab into place

5. Plug lamp into outlet and turn on; if bulb does not illuminate

instantly, please refer to the troubleshooting section of this manual.

BULB REPLACEMENT INSTRUCTIONS

Removal

1. Unplug lamp from power source.

2. To access to the bulb, remove grid

diffuser by depressing the tab and

lifting it out. (See page 7)

3. Firmly hold bulb base (B) and pull

bulb (C) from the socket (A) in

an outward motion.

Installation

1. Unplug lamp from power source.

2. Firmly hold base (B) and push bulb

3. Be sure bulb is ﬁrmly seated in the

socket (see below) and snapped

into the metal bulb clip (D).

4. Replace grid diffuser.

gap

Notice

large gap

Correctly seated bulb Incorrectly seated bulb

YES NO

Fig. 10

TROUBLESHOOTING

Before Requesting Service on Your Verilux®Lamp, Please Read the

Following:

• Make sure all power connectors, cords, and plugs are inserted fully

and securely.

• Be sure the bulb is securely seated into the socket. (See page 8)

• Make sure there is power to the wall outlet or try another outlet.

CARE & CLEANING

Your lamp is made from high quality materials that will last for many

years with minimum care. You may want to periodically clean the lamp,

using a mild non-abrasive cleaner and soft cloth. When cleaning, make

sure you have turned off and unplugged the unit, and allowed sufﬁcient

time for the unit to cool. All liquid should be properly wiped away and

dried prior to restoring power.

DO NOT USE SOLVENTS OR CLEANERS CONTAINING

ABRASIVES, OR AMMONIA BASED CLEANERS

Note: All moisture should be properly wiped away and dried prior to

restoring power.

This manual suits for next models

Table of contents

Other Verilux Home Lighting manuals

Verilux

Verilux HappyLight VT03 User manual

Verilux

Verilux VF03 User manual

Verilux

Verilux VD06 User manual

Verilux

Verilux LED SmartLight VF09 User manual

Verilux

Verilux Heritage User manual

Verilux

Verilux Heritage VD03 User manual

Verilux

Verilux VD05 User manual

Verilux

Verilux Brookfield DELUXE VF08 User manual

Verilux

Verilux LED SmartLight VF09 User manual

Verilux

Verilux LED SmartLight VD46 User manual

Verilux

Verilux VD017 User manual

Verilux

Verilux VD08 User manual

Verilux

Verilux Original VD01 User manual

Verilux

Verilux Troika VD10 User manual

Verilux

Verilux EasyRead VM05 User manual

Verilux

Verilux Planet Light PL05 User manual

Verilux

Verilux VC01 User manual

Verilux

Verilux vt20 User manual

Verilux

Verilux Planet Light PL03 User manual

Verilux

Verilux Planet Light PL03 User manual

Verilux

Verilux Natural Spectrum ShopLight VC01HH1 User manual

Verilux

Verilux SmartLight VD12 User manual

Verilux

Verilux Modern Deluxe Natural Spectrum User manual

Verilux

Verilux HappyLight User manual

Popular Home Lighting manuals by other brands

JONATHAN Y

JONATHAN Y JYL5019A manual

JONATHAN Y

JONATHAN Y JYL6007A quick start guide

Philips

Philips Ledino 31606/11/16 Specifications

Salus

Salus UG600 installation manual

Safavieh Lighting

Safavieh Lighting CANDRI TBL4427A manual

Hunter

Hunter Bullet Spotlight Kit Owner's guide and installation manual

Philips

Philips Ledino 16811/87/16 user manual

Philips

Philips 405441213 user manual

Philips

Philips Halogen Light Brochure & specs

Pentair

Pentair GLOBRITE Installation and user guide

Philips

Philips 55592-30-16 user manual

Livoo

Livoo Night light user manual

Schwaiger

Schwaiger NFL45 user guide

FRITZ HANSEN

FRITZ HANSEN AQ01 PLUG-IN manual

MOOD

MOOD CORSIN JY-16 Installation and operation instructions

Safavieh Lighting

Safavieh Lighting KREMP TBL4409A manual

JONATHAN Y

JONATHAN Y JYL8019 manual

XTRASUN

XTRASUN XTDEOKT1 user manual