Vello BG-C1 User manual

BG-C1

BATTERY GRIP

Designed For The Canon XS,

XSi and Ti SLR Cameras

USER

’

S MANUAL

Introduction

Thank you for choosing Vello and congratulations on

your new BG-C1 battery grip purchase. Enjoy the many

beneﬁts that a battery grip offers, such as extended

shooting time and more control and comfort when

shooting in a vertical (portrait) orientation.

The Vello BG-C1 is compatible with the Canon XS, XSi

and T1i SLR cameras. The BG-C1 accepts two Canon

LP-E5 rechargeable batteries, or six AA batteries

(alkaline, Ni-MH, lithium, or nickel-manganese) can

be used instead for added convenience. The BG-C1

is equipped with an alternate shutter-release button,

aperture/exposure compensation button, AF point

selection/magnify button, AE lock/FE lock/lndex/

Reduce button, and main dial for shooting in a vertical

position. Please read through this entire manual before using the

BG-C battery grip.

Precautions

1. The BG-C should only be used with compatible

devices speciﬁed in this manual.

2. Only use with batteries and battery holders

recommended in this manual.

3. Cover the power terminals with the contact

cap when the BG-C is not in use. This prevents

electrical shorts caused by metal objects touching

the power terminals.

4. When the battery holder is removed from the

grip, remove the batteries or place the holder in

a container to prevent electrical shorts caused by

contact with other metal objects.

5. If you notice smoke, an unusual smell or noise from

the battery pack, discontinue use immediately.

Remove the batteries and take the device to a Vello

authorized reseller.

6. Turn the grip power o when not shooting

vertically.

7. The battery level may not display properly if

batteries are inserted before mounting the grip.

8. Remove batteries from the grip when not in use.

9. Do not attempt to disassemble.

10. Avoid water or extreme humidity and keep in a

dry and cool place.

11. Keep out of reach of children.

OVERVIEW INTRODUCTION

ASSEMBLY

Overview

14 15 16

18 19

Contact Cap

Protects grip contacts. Keep covered

when the grip is not in use.

2Electrical Contacts

Communicates with the camera

electronics.

3Mounting Screw

Aligns with the cªmerª’s tripºd sºcket.

4Guide Pin

Helps align the camera to the grip.

5Attachment Wheel

Secures the grip to the camera.

6Battery Chamber Latch

Locks and unlocks the battery

chamber.

7DC Coupler Cord Mount

Groove for use with the Canon AC

Power Adapter (ACK-E8).

Aperture/Exposure Compensation

Button*

9AF Point Selection/Magnify

Button*

AE Lock/FE Lock/Index/Reduce

Button*

11 Grip Power Switch

Turns the grip power on and off.

12 Shutter-Release Button*

Camera Battery Chamber Cover

Holder

Stores the cover when the grip is

mounted.

14 Main Dial*

15 Hand Strap Mount

Optional hand strap may be mounted

for a secure hold while shooting.

16 Tripod Socket

For mounting on a tripod.

17 Battery Holder Protective Cover

18 LP-E5 Battery Holder

Holds up to two Canon LP-E5

batteries.

19 Dual Battery Compartment

20 AA Battery Holder

Holder for six AA batteries.

* Performs the same function as on the

camera.

OVERVIEW INTRODUCTION

ASSEMBLY

Attaching The Grip

1. Ensure that the power is

turned o on the camera

and that the power switch

is set to OFF on the battery

grip.

2. Remove the battery

from the camera battery

compartment.

3. Open the camera battery

chamber cover at a 35º

angle and gently pull the

cover to remove it.

4. To prevent loss, place the

camera battery chamber

cover into the BG-C

battery chamber holder.

5. Remove the protective

cap and connect the BG-

C grip to the camera,

while aligning the grip’s

mounting screw with the

camera’s tripod socket.

6. Rotate the attachment

wheel in the direction

shown by the arrow until it

is ﬁrmly tightened.

When removing the grip,

turn the camera power off,

remove batteries, and replace

protective contact cap.

OVERVIEW INTRODUCTION

ASSEMBLY

Inserting Batteries

1. Ensure that the power is

turned o on the camera

and turn the battery

chamber latch counter-

clockwise to open the

battery chamber door.

2. Canon LP-E5 Batteries:

Insert up to two batteries

(into any slot) by matching

the power contacts with

the LP-E5 battery holder.

Press the battery down

and slide it in the direction

of the arrow.

3. Insert the LP-E5 battery

holder into the grip and

turn the latch to lock it, as

indicated by the arrows.

4. AA Batteries: Place six new

AA batteries of the same

type into the AA battery

holder as shown, while

ensuring that they are in

the correct orientation.

5. Insert the holder into the

grip and lock as shown.

Switch the grip power to

ON and then turn on the

camera’s power. Check the

battery level in the control

panel or viewﬁnder.

6. Household Power Outlet:

The Canon ACK-E8

AC Power Adapter Kit

(sold separately) can be

connected to the grip.

Place the DC coupler

through the small groove

on the back of the grip.

Ensure that the cord

doesn’t get pinched by the

battery holder.

OVERVIEW INTRODUCTION

ASSEMBLY

Specifications

Power Source 1. One or two Canon LP-E5 rechargeable Li-ion batteries

2. Six AA/LR6 Alkaline batteries

3. Works with the Canon AC Adapter Kit ACK-E8 (sold separately)

Operating Temperature 32 – 104 °F (0 – 40 °C)

Dimensions Approximately 129.2 x 103.1 x 79.9 mm/5.1 x 4.1 x 3.1 in.

Weight Approximately 230 g (8.1 oz) (excluding holder and batteries)

* Approximate measurements.

Speciﬁcations and design are subject to change without notice.

AA batteries do not provide as much shooting time as LP-E5 rechargeable batteries. Performance of AA batteries may also be dependent on brand

and storage conditions. AA batteries may not function under 68º F (20º C).

Table of contents

Other Vello Camera Accessories manuals

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions