Velab VE-K Series User manual

VELAB, Co. 2017 1 Rev. 1 | Nov_2017

SERVICE MANUAL COMPACT SCALE

VE-K IP68 SERIES

Revision 1.1 / July 2017

 
VELAB, Co. 2017 2 Rev. 1 | Nov_2017 
TABLE OF CONTENTS 
 
KEYPAD DEFINITION..........................................................................................................................3 
1 Function Settings...............................................................................................................................3 
SWITCHING SCALE ON.......................................................................................................................4 
2 Switch Scale On .................................................................................................................................4 
3 Display on Screen When Scale is Turned On.....................................................................................4 
OERATION FUNCTION.......................................................................................................................4 
1. Zero ...................................................................................................................................................4 
2. Tare ...................................................................................................................................................4 
3. Check weigh mode............................................................................................................................4 
4. Switch Off Scale.................................................................................................................................4 
5. Unit Conversion.................................................................................................................................4 
6. Parts Counting...................................................................................................................................5 
7. Setting High and Low Weighing Limits for Check Weighing .............................................................5 
8. Using Function Settings.....................................................................................................................5 
PARAMETER FUNCTION SETTINGS....................................................................................................6 
1. Initial Value Setting...........................................................................................................................6 
2. Linear Calibration..............................................................................................................................6 
3. Single Point Calibration.....................................................................................................................6 
4. Unit Settings `....................................................................................................................................7 
5. Internal Function Settings.................................................................................................................7 
INTERNAL TEST..................................................................................................................................8 
TROUBLESHOOTING..........................................................................................................................8 
SPECIFICATIONS ................................................................................................................................8 
WARRANTY INFORMATION...............................................................................................................9 
© COPYRIGHT INFORMATION ..........................................................................................................9 
 
 
 
 

VELAB, Co. 2017 3 Rev. 1 | Nov_2017

1. KEYPAD DEFINITION

1.1 Function Settings

KEY

FUNCTION

Switch unit on, then press and hold the + +

keys to

Sets mode of scale

Switch unit on, then press and hold the + keys to

Sets linear calibration

Switch unit on, then press and hold the key to

Sets single point calibration

Press and hold the key to

Enter initial test mode, displays “ADC

value” orderly

Switch unit on, after countdown press and hold the +

+ keys

Saves initial value

Switch unit on, after countdown press and hold the +

keys

Sets internal functions

Switch unit on, after countdown press and hold the key

Sets units

In weighing mode, press the key

Zero the scale

In weighing mode, press the key

Tare the scale

In weighing mode, press the key

Turn high and low weighing limit

function on/off

In weighing mode, press the key for 3 sec.

Turn on scale

In weighing mode, press the key for 3 sec.

Unit conversion

In weighing mode, to turn on function for high and low

weighing limit, press the key for 3 sec.

Sets high and low weighing limits

In weighing mode, to turn off function for high and low

weighing limit, press the key for 3 sec.

Sets user functions

VELAB, Co. 2017 4 Rev. 1 | Nov_2017

1. SWITCHING SCALE ON

1.2 Switch Scale On

STEP

PROCEDURE

Press the key, LED will light up. “POWER ON DELAY” for 1.5 sec. The unit will then perform

a start-up procedure

1.3 Display on Screen When Scale is Turned On

STEP

PROCEDURE

The menu is first displayed followed by a countdown from 9 to 0. “ON” 600ms | “OFF” 400ms

Displays: Model Voltage Ver X , ex: 3000 DC 6.4 Ver C0

2. OERATION FUNCTION

2.1. Zero

STEP

PROCEDURE

Press the key, to “ZERO”the unit once it’s stable, then Gross Weight will display zero.

2.2. Tare

STEP

PROCEDURE

Press the key, to “TARE” the unit once it’s stable, then the Gross Weight will be cleared

and the display will show zero.

2.3. Check weigh mode

STEP

PROCEDURE

Press the key and “CK-on” or “CK-off” will be displayed.

2.4. Switch Off Scale

STEP

PROCEDURE

Press and hold the key for 3 sec., then “off” will displayed and the scale will shut off

2.5. Unit Conversion

STEP

PROCEDURE

Press and hold the key for 3 sec. to convert units to kg, g, pcs, lb.oz, lb

VELAB, Co. 2017 5 Rev. 1 | Nov_2017

2.6. Parts Counting

STEP

PROCEDURE

Under PCS mode, press and hold the key for 3 sec., “SP = 5”is displayed

Press the key to select the number of samples: 5, 10, 20, 50, 100, 200, 500

Press the key, the display will show ------ until the number of samples is displayed and

stable

2.7. Setting High and Low Weighing Limits for Check Weighing

STEP

PROCEDURE

When “CK-on”is displayed in check weigh mode, press and hold the key for 3 sec.,

When “SET-Hi” is displayed, press the key to enter high weight limit settings and press the

or key to set. Press the key, “SET- Lo” is displayed.

When “SET-Lo” is displayed, press the key to enter low weight limit settings, and press the

or key to set. Press the key, “SET-Li” is displayed;

When “SET-Li” is displayed, press the key to enter check weigh mode settings. Press the

key to set high weight limit “Lim-Hi” or low weight limit “Lim-Lo” or alarm inside the

range “Lim-in” or alarm outside the range “Lim-Un”. Press the key, “Lim-CK” is displayed.

When “Lim-CK” is displayed, press the key to enter check weighing mode settings. Press

the key to set stable “Lim-St” or the alarm for unstable “Lim-uS”, then press the key,

“Lim-BZ”(buzzer settings) is displayed.

When “Lim-BZ” is displayed, press the key to enter check weighing buzzer settings. Press

the key to set buzzer to quiet “Lim-BZ” or alarm “Lim-Mu”, then press the key to

return to weighing mode.

2.8. Using Function Settings

STEP

PROCEDURE

When “CK-off” is displayed in check weighing mode, Press and hold the key for 3 sec. to

enter use function settings, the LED displays “SPED-X” (weighing speed)

When “SPED-X” is displayed, press the key to set weighing speed: “SPED-F” = fast, “SPED-

M” = middle, “SPED-S” = slow, then press the key, “A J-X”(dynamic weighing) is

displayed.

When “A J-X” is displayed, press the key to set dynamic weighing, ”A J-0~A J-9”indicates

that 0~9 sensibility is locked, then press the key, “APF-XX”(auto power-off) is displayed.

VELAB, Co. 2017 6 Rev. 1 | Nov_2017

When “APF-XX” is displayed, press the key to set automatic power-off time，”APF- 0”=

no automatic power off, “APF-10”= power off in 10 min., “APF-20”= power off in 20min.,”

APF-30”= power off in 30min., “APF-60”= power off in 60min., then press the key, “P S-

XXX”(power saving mode) is displayed.

When “P S-XXX” is displayed, press the key to set power saving. “P S- on” turn on power

saving mode, “P S- off” turn off power saving mode, then press the key, “Save-X”(initial

unit saving) is displayed.

“Save-X” is displayed, press the key to set initial unit saving: ”Save-Y” save the unit when

turning scale on, “Save-N” does not save the unit when turning scale on. To return to weighing

mode, press the key.

3. PARAMETER FUNCTION SETTINGS

3.1. Initial Value Setting

STEP

PROCEDURE

Switch unit on, after countdown press and hold the + + keys, then shut scale off

to set initial values.

3.2. Linear Calibration (make sure the weighing units are set to kg)

STEP

PROCEDURE

Switch unit on, after countdown press and hold the + keys, LED display C-Line

Press the key to calibrate zero point when there is no load on weighing plate, the LED

display will show C-ZERO stable, then it will show on1

calibrate 1/3 capacity when weight is placed, the LED display will show ------ stable , then it

will show on2

calibrate 2/3 capacity when weight is placed, the LED display will show ------ stable , then it

will show on3

calibrate full capacity when weight is placed, the LED display will show ------ stable , then it

will show PASS then it will return to weighing mode after countdown

3.3. Single Point Calibration (make sure the weighing units are set to kg)

STEP

PROCEDURE

Switch unit on, press and hold the key, the LED display will show CAL

Press the key to calibrate the zero point there is no load on weighing plate, the LED

display will show C-ZERO stable , then it will show SPAN

When 1/3 of the load capacity is placed on scale, the LED display will show on1 stable , then

it will show PASS then it will return to weighing mode after countdown

VELAB, Co. 2017 7 Rev. 1 | Nov_2017

When 2/3 of the load capacity is placed on scale, the LED display will show on2 stable, then

it will show PASS then it will return to weighing mode after countdown

When full capacity is placed on scale, the LED display will show on3 stable, then it will show

PASS then it will return to weighing mode after countdown

3.4. Unit Settings `

STEP

PROCEDURE

Switch unit on, after countdown press and hold the key, the LED display will show

XXXXXX

Press the key and press the key to set, then press the key

(a) (b) (c) (d) (e) (f)

(a) kg | 0 = off 1 = on

(b) g | 0 = off 1 = on

(d) lb. oz | 0 = off 1 = on

(e) PCS | 0 = off 1 = on

(f) Unit (when on) | Default：110010

3.5. Internal Function Settings

STEP

PROCEDURE

Switch unit on, after countdown then press and hold the + keys

Press the and keys to set, then press key

(a) (b) (c) (d) (e) (f)

(a) Initial zero-point setting when units are switched on | 0 = 10%, 1 = 20%, 2 = 100%

(b) Manual zero range | 0 = 2%, 1 = 3%, 2 = 4%

(d) Automatic zero range | 0 ~9 0~9

(e) Automatic zero range when loaded | 0 ~9 0~9d

VELAB, Co. 2017 8 Rev. 1 | Nov_2017

(f) 0 | Default: 000120

4. INTERNAL TEST

Press and hold the key to switch the scale on, the LED display will show ADC value

Press any key, the display will show the corresponding key value

Press the key to return to weighing mode

5. TROUBLESHOOTING

MODE

PROBLEM

SOLUTION

Turn On

LOWBAT light

Charge scale

Turn On

B- Err

Low battery / Charge

Weigh

O-load

Check if load is more than max. capacity

Weigh

O-zero

Exceed initial zero range when turned on

6. SPECIFICATIONS

Switch unit on and press and hold the + + keys to turn on

MODE

1500g

3000g

6000g

15000g

30000g

n=3000

0.5g

10g

n=6000/7500

0.2g

0.5g

n=15000

0.1g

0.2g

0.5g

n=30000

0.05g

0.1g

0.2g

0.5g

VELAB, Co. 2017 9 Rev. 1 | Nov_2017

7. WARRANTY INFORMATION

VELAB, Co. offers Limited Warranty (Parts and Labor) for components that fail due to defects in

materials or assembly. The guarantee starts from the delivery date.

During the warranty period, if any repair is necessary, the customer must inform the supplier or VELAB,

Co. The company or its authorized technician reserves the right to repair or replace any component at

its own discretion. Any shipping costs involved in sending defective units to a repair center are the

responsibility of customers.

The warrantee will be canceled if the equipment is not returned in the original packaging and the

correct processed claim documentation. All claims are the sole discretion of VELAB, Co.

This warranty does not cover equipment with defects or poor performance caused by abuse, accidental

damage, exposure to radioactive or corrosive materials, negligence, defective installation, unauthorized

modifications, repair or failure to follow the requirements and recommendations stated in user manual.

Repairs carried out under the warranty do not extend the warranty period. Components removed during

warranty repairs become the property of the company.

any form or through any means without prior permission of VELAB, Co.

VELAB, Co. reserves the right to make changes in the technology, features, specifications and design of

its equipment without prior notice.

All information contained in this publication is up to date, complete and accurate. VELAB, Co. is not

responsible for interpretation errors that may result from reading the material stated on this document.

Other manuals for VE-K Series

Table of contents

Other Velab Scale manuals

Velab

Velab VE-K Series User manual

Popular Scale manuals by other brands

AWS

AWS ZEO-50 user manual

Gima

Gima Glass Body Fat Analyzer Use and maintenance book

Seca

Seca 374 user manual

TEC

TEC TEC SL59 SERIES owner's manual

Axis

Axis B/E Series user manual

Alecto

Alecto ACW-40 user manual

Rice Lake

Rice Lake MSI-4260 IS Technical manual

IKA

IKA RCT basic safety control operating instructions

ADE

ADE M20011 operating manual

Duronic

Duronic KS3000 manual

Digi

Digi SM-720 Service manual

Cardinal

Cardinal CS Series Operation manual

Korona

Korona Kastella Instructions for use

A&D

A&D FC-50Ki instruction manual

BDA

BDA CAMARGUE installation guide

Tanita

Tanita HD-357 Instructions for use

Leifheit

Leifheit 03173 quick start guide

Lumme

Lumme LU-1340 user manual