Vaxcel T0238 Instruction manual

160303

Lock Nut (E)

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read and save these instructions.

Bulb type B Max. 60W

(not include)

Metal Frame

Fig.1

Glass Panel

Clip

Metal Frame

Fixture

Glass Panel

Set Screw

Slot

Headless Screw(D)

Rubber Pad (H)

Wire Nut (F)

Green Grounding Screw (C)

Headless Screw (D)

Mounting Plate (A)

Mounting Screw (B)

Lock Nut

(E)

Fixture Grounding Wire

House Grounding Wire

Fixture Wire

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

T0238

Mounting Screw (B) Wire Nut (F) Ball Nut (G)

Hardware Package (included):

Green Grounding

Screw (C)

Back Plate

Ball Nut(G)

Photocell

Mounting Plate (A)

Fixture

IMPORTANT:

The sensor has an excellent photocell

function to enable the light to turn on

at dusk and off at dawn automatically.

160303

Fig.2 Fig.3

1. Thread two headless screws through the mounting plate, and then secure them with four lock nuts (two on each side

of the mounting plate). Adjust the length of the headless screws if necessary.

Note: Make sure that the headless screws are lined up horizontally to make the fixture level.

2. Attach mounting plate to the outlet box using two mounting screws.

3. Remove two set screws to separate the metal frame from the fixture.

4. Install three bulbs (not included). Check relamping label at socket area or packaging for maximum allowed wattage.

5. Take a glass panel, insert it into the slot at one side of the metal frame carefully, secure it by pressing clips. Repeat

with the other glass panels.(See Fig.1)

6. Attach the metal frame back to fixture, and then secure it with two set screws.(See Fig.1)

7. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows:

---Connect the hot wire (usually black insulation) from the power source to the black wire from the fixture.

---Connect the neutral wire (usually white insulation) from the power source to the white wire from the fixture.

---Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting plate with the green

grounding screw, or connect to the source grounding wire if available.

Carefully put the wires back into the outlet box.

8. Attach the fixture to the mounting plate by inserting headless screws into holes on back plate, and then secure it

with two rubber pads and two ball nuts.

NOTE: With silicone caulking compound, caulk completely around where the back plate meets with the wall

surface to prevent water from seeping into the outlet box.

Turn off the power at fuse or circuit box.

Turn on the power at fuse or circuit box.

Installation Steps

1. Turn off the power at the fuse or circuit box before starting installation.

2. Loosen the wire nuts connected with the wires from photocell. (See Fig.2)

Note: Do not move the photocell to prevent water from seeping into the outlet box.

3. Take a white pigtail and black pigtail and make wire connections using wire nuts: (See Fig.3)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the back plate of the fixture.

Photocell

White Wires From Photocell

Wire Nuts

Wires From Fixture

Wires From

Main Power

Wire Nut

White Pigtail

Pigtail

Red Wires From Photocell

Black Wires From Photocell

Operation the Unit Without Photocell

160303

Lock Nut (E)

Headless Screw(D)

Rubber Pad (H)

Ball Nut (G)

A: 9"

B: 14-1/4"

C: 10-1/8"

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Assembly Kit

5536MM (1 SET)

Mounting Screw (B)

Wire Nut (F)

Green Grounding

Screw (C)

Mounting Plate (A)

Glass Panel

9806RG (4PCS)

Other Vaxcel Outdoor Light manuals

Vaxcel

Vaxcel T0476 Instruction manual

Vaxcel

Vaxcel Chatham Instruction manual

Vaxcel

Vaxcel T0568 Instruction manual

Vaxcel

Vaxcel T0694 Instruction manual

Vaxcel

Vaxcel T0624 Instruction manual

Vaxcel

Vaxcel T0389 Instruction manual

Vaxcel

Vaxcel T0702 Instruction manual

Vaxcel

Vaxcel Theta T0612 Instruction manual

Vaxcel

Vaxcel T0451 Instruction manual

Vaxcel

Vaxcel T0297 Instruction manual

Vaxcel

Vaxcel T0454 Instruction manual

Vaxcel

Vaxcel T0241 Instruction manual

Vaxcel

Vaxcel T0700 Instruction manual

Vaxcel

Vaxcel T0365 Instruction manual

Vaxcel

Vaxcel T0542 Instruction manual

Vaxcel

Vaxcel T0199 Instruction manual

Vaxcel

Vaxcel T0080 Instruction manual

Vaxcel

Vaxcel T0503 Instruction manual

Vaxcel

Vaxcel T0244 Instruction manual

Vaxcel

Vaxcel T0647 Instruction manual

Vaxcel

Vaxcel T0366 Instruction manual

Vaxcel

Vaxcel Lambda T0627 Instruction manual

Vaxcel

Vaxcel T0062 Instruction manual

Vaxcel

Vaxcel T0468 Instruction manual

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual