Vaxcel T0476 Instruction manual

Turn off the power at fuse or circuit box

Installation Steps

Glass Panel

Metal Frame

Iron Plate

Threaded Pipe

1. Unscrew the loop to remove the rubber pad and cover.

2. Unscrew the hex nut and washer from the threaded

pipe to remove the upper cover.

3. Gently place four glass panels into the metal frame,

then press the clips to secure the glass panels. (Fig.1)

Note: The patterned side of faces glass out.

Fig.1

Glass Panel

Clip

Metal

Frame

4. Install a bulb (not included). See relamping label

at socket area or packaging for maximum allowed wattage.

5. Attach the upper cover, washer, hex nut, cover, rubber pad

and loop to the threaded pipe.

6. Pull out the wires and grounding wire from the post.

Make wire connections using the wire connectors (B):

---The black wire from the fixture to the black wire

from the post.

---The white wire from the fixture to the white wire

from the post.

---The grounding wire from the fixture to the grounding

wire from the post.

Carefully put the wires back into the post.

Bulb Type A Max.60W

(not included)

Grounding Wire

Fixture Wire

Wire Connector (B)

Post

Fitter

Photocell

Fitter Screw (A)

Hardware Package (included):

Wire Connector (B)

Fitter Screw (A)

Loop

Rubber Pad

Cover

Washer

Hex Nut

Upper Cover

181220

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0476

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Turn on the power at fuse or circuit box

181220

7. Place the fitter on the post, then secure it with the fitter screws (A).

CAUTION: With silicone caulking compound, caulk completely around where the fitter meets with the

post surface to prevent water from seeping into the post.

Turn on the power at fuse or circuit box

1. Turn off the power at the fuse or circuit box before starting installation.

2. Unthread the fitter screw and plate, and then Loosen the wire connectors connected with the

wires from photocell. (See Fig.2)

Note: Do not move the photocell to prevent water from seeping into the outlet box.

3. Take a white pigtail and black pigtail and make wire connections using wire connectors (B) : (See Fig.3)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the back plate of the fixture.

Operation the Unit Without Photocell

Photocell

White Wires From

Photocell

Wire Connector

Wire Connector (B)

Black Wire From

Fixture

Wires From Fixture

Wires From

Main Power

White Pigtail

Pigtail

Red Wires From

Photocell

Black Wires From

Photocell

Fig.2 Fig.3

White Wire From

Fixture

Plate

Fitter Screw

Photocell

Wire Connector

Black Wire From

Fixture

White Pigtail

Fig.2

Plate

Washer

Hex Nut

Assembly Kit

6062MM (1SET)

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Glass Shade

10076W

Wire Connector (B)

Fitter Screw (A)

A:8"

B:21-1/2"

Other Vaxcel Outdoor Light manuals

Vaxcel

Vaxcel T0454 Instruction manual

Vaxcel

Vaxcel T0698 Instruction manual

Vaxcel

Vaxcel T0414 Instruction manual

Vaxcel

Vaxcel T0649 Instruction manual

Vaxcel

Vaxcel T0616 Instruction manual

Vaxcel

Vaxcel T0103 Instruction manual

Vaxcel

Vaxcel T0542 Instruction manual

Vaxcel

Vaxcel T0099 Instruction manual

Vaxcel

Vaxcel T0350 Instruction manual

Vaxcel

Vaxcel T0468 Instruction manual

Vaxcel

Vaxcel X0090 Instruction manual

Vaxcel

Vaxcel T0692 Instruction manual

Vaxcel

Vaxcel T0371 Instruction manual

Vaxcel

Vaxcel T0362 Instruction manual

Vaxcel

Vaxcel T0062 Instruction manual

Vaxcel

Vaxcel T0647 Instruction manual

Vaxcel

Vaxcel T0541 Instruction manual

Vaxcel

Vaxcel T0620 Instruction manual

Vaxcel

Vaxcel T0701 Instruction manual

Vaxcel

Vaxcel T0396 Instruction manual

Vaxcel

Vaxcel Theta T0612 Instruction manual

Vaxcel

Vaxcel T0551 Instruction manual

Vaxcel

Vaxcel T0572 Instruction manual

Vaxcel

Vaxcel T0389 Instruction manual

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual