Vava VA-LTS006 User manual
100” 16:9 ALR Screen
for UST Projector
User Manual
VA-LTS006
Package Contents
Assemble the Inner Frames
Assemble the Screen
Assemble the Outer Frames and Corner Protectors
Mount the Screen onto Wall
Screen Height Adjustment
Specification
Warranty and Service
Contents
02
04
06
10
11
14
15
15
Thank you for choosing the VAVA Projection Screen. Please read this User Manual thoroughly
before use and retain it for future reference.
With the constant optimization of the projector, instructions in this User Manual may not be
totally applicable to the actual product.
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INFORMATION AND INSTRUCTIONS. KEEP FOR
FUTURE REFERENCE.
CAUTION
For optimal projection, safe installation and long lasting use of the screen, please always follow
below instructions carefully:
·Always handle the screen on a clean, level surface covered with clean cloth, film, etc.
·Gently hold and put down the unit to avoid any damage to the screen surface.
·Do not touch the screen surface by hand. Before handling the screen, put on the pairs of
gloves to avoid fingerprint, dust or hand oil on the screen surface.
·Do not poke the screen surface with any sharp or hard objects to avoid scratches or tears.
·It is recommended to clean the screen once every two weeks.
·Wipe clean the screen with a soft cloth and lukewarm water. For general dust, use a soft
brush (rough towels or cloth may damage the screen) to clean the screen surface.
·Do not clean with abrasive detergent, solvent or other coarse chemicals to avoid permanent
damage to the screen surface.
·You may notice a slight smell for first-time use, which will dissipate over time. If the smell is
too strong, open a window to ventilate the room.
·Children should be supervised to ensure that they do not play with the screen.
·Please contact your local dealer for repair or maintenance. For any questions or concerns,
please email us at support@vava.com or call us at (877) 969-8282.
READ AND SAVE THESE INSTRUCTIONS
01
2 x Struts
(With hooks)
24 x ST4*8 Screws
⑥
Package Contents
4 x Horizontal Inner Frames 4 x Corner Connectors
8 x M5*7 Screws 1 x Cross screwdriver1 x Hexagon Wrench
2 x Vertical Inner Frames
②
③④ ⑤
⑦
1-C
1-C
1-A
1-B
1-A
1-B
①
02
2 x Anti-dirt Gloves
⑧
4 x Short Fiberglass Strips
(10-A)
2 x Long Fiberglass Strips
(10-B)
1 x ALR Screen
⑨
N x Draw Springs
13-A
13-A
13-B
13-B
13-C
13-C
Package Contents
Note：
Please wear the included protective gloves before handling in case of scratches from
metal parts
03
8 x Wall Anchors with Screws
4 x Wall Hangers
2 x Hooks 2 x Vertical Outer Frames
(13-C)
4 x adhesive tapes 2 x Wall Drilling Templates4 x Corner Protectors
4 x Horizontal Outer Frames
(13-A; 13-B)
1 x Level Ruler
Assemble the Inner Frames
Splice the two inner horizontal frames. Fix with M5*7 screws.
Insert the four corner connectors into the inner Horizontal and vertical frames. Fix with
ST4*8 screws.
M5*7 screws
M5*7 screws
M5*7 screws
ST4*8 screw
ST4*8 screw
ST4*8 screw
ST4*8 screw
ST4*8 screws
1-A
1-C 1-C
1-B
1-B 1-A
④
④
⑥
⑥
⑥
⑥
②②
②
②
⑥
ST4*8 screws
⑥
ST4*8 screws
⑥
ST4*8 screws
⑥
1
2
1
1
④
M5*7 screws
④
2 2
2 2
04
Assemble the Inner Frames
Fix the two struts onto the sliders with the included M5*7 screws. Keep them level with
each other with a distance of 110cm / 43.3in.
3
10
20
30
40
50
60
10
20
30
40
50
60
10
20
30
40
50
60
10
20
30
40
50
60
110cm / 43.3in
⑦ ⑦
Slider
M5*7 Screw
Slider
M5*7 Screw
Slider
M5*7 Screw
Slider
M5*7 Screw
④④
④④
05
Assemble the Screen
Place a piece of clean and soft cloth or plastic film onto a flat surface.
1
Wear the included anti-dirt gloves before handling the screen to avoid fingerprint smudges.
2
Unpack the screen, gently unroll it onto the cloth or plastic film with its back facing upwards.
Caution: Handle with care. Avoid any creases on screen
3
Cloth (clean, flat)
Black side facing upwards
Note:
The screen is easy to scratch. Do not poke the screen surface with any sharp or hard objects
to avoid scratches or tears.
Cloth (clean, flat)
06
Assemble the Screen
Insert the fiberglass strips into the screen sides:
1 longer strip into the short screen side；
2 shorter strips into the long screen side. Make sure the shorter ones in the long screen
sides are well aligned with each other.
4
Long Fiberglass
Strip (10-B)
Long Fiberglass
Strip (10-B)
Short Fiberglass
Strips (10-A)
Short Fiberglass
Strips (10-A)
ALR Screen
ALR Screen
⑨
⑨
07
08
Assemble the Screen
Put the installed inner frame onto the back side of the screen. Pay attention to the labels
on the screen for the right orientation and align them well by referring to the marks on the
four corners of the screen.
5
10
20
30
40
50
60
up
up
10
20
30
40
50
60
Lower
edge
Lower
edge
Upper height adjuster
Cloth
ALR Screen
⑨Make sure the
Lower edge mark in
this position.
Upper edge
Lower edge
Table of contents
Other Vava Projector Accessories manuals
