Varytec Derby User manual

User’s manual

LED Triple

Derby

2 / 5

Table of content

1. Safety instructions........................................................................................................................... 3

2. Product description ......................................................................................................................... 4

Description ........................................................................................................................................... 4

3. Installation....................................................................................................................................... 4

4. Start Up........................................................................................................................................... 4

5. Master Slave Mode......................................................................................................................... 4

3 / 5

1. Safety instructions

FOR SAFE AND EFFICIENT OPERATION

Be careful with heat and extreme temperatureAvoid exposing it

to direct rays of the sun or near a heating appliance.

Not put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C.

Keep away from humidity, water and dust

Do not place the set in a location with high humidity or lots of dust.

Containers with water should not be placed on the set.

Keep away from sources of hum and noise

Such as transformer motor, tuner, TV set and amplifier.

To avoid placing on un-stable location

Select a level and stable location to avoid vibration.

Do not use chemicals or volatile liquids for cleaning

Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.

If out of work, contact sales agency immediately

Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,

do not open the cabinet by yourself, it might result a

danger of electric shock.

Take care with the power cable

Never pull the power cable to remove the plug from the receptacle, be sure

to hold the plug. When not using the player for an extended period of time

be sure to disconnect the plug from the receptacle.

4 / 5

2. Product description

LED Lightsource: 2x 9W LED, RGB 3in1,

Master Slave Mode

Sound Control Mode

Volt: AC240V 50 Hz

Powerconsumption: max 35W

Working temperatur: Indoor 0°C- +40°C

Wight: 5 kg

Size: 450L x 450B x 230H

Use: for Nightclubs, Entertainment Areas or Disco

Description: This Product uses extrem bright LEDs as lightsource. These are bright, well coloured,

hitproof, and they have a extreme long lifetime up to 100 000 h . Further advantages are less heat and

less powerconsumption. Instead of other products this one is able to work 24 hours without breaks.

3. Installation

1. You can mount this product in every position , make sure that there is a distance of min 1 m to

walls or flammable stuff. Be sure to mount he product well and don´t forget the ground.

2. Make sure to have the wright voltage and power..

3. Attention : the XLR connector is no DMX connector, never use DMX products or

controller in the line!!

4. Start Up

1. Connect the product to the powersource, now you are in music mode.

2. now the product reacts to music impuls.

3. with the potentiometer on the back you can controll the sensitivity of the mikrophon.

4. if there is no music signal for about 10 sec. it shuts down the motor and lightsource.

5. Master Slave Mode

1. Choice the product which you want to bot he master.

2. choice the desired sensitivity on the master.

3. connect all slave products in the lin with XLR plug.

4. every seitivity of the slave products have to be 0.

5. Now every slave reacts like the master do.

6. Attention : the XLR connector is no DMX connector, never use DMX products or

controller in the line!!

5 / 5

Importeur:

B & K Braun GmbH

Industriestraße 1

D-76307 Karlsbad

www.bkbraun.com

[email protected]

Table of contents

Other Varytec Lighting Equipment manuals

Varytec

Varytec Mini LED Strobe User manual

Varytec

Varytec Studio Par II CDM 150 User manual

Varytec

Varytec Easymove XL 60 Spot User manual

Varytec

Varytec Hell Ball I User manual

Varytec

Varytec LED Laser 4 User manual

Varytec

Varytec Strobe Xenon 3000DMX User manual

Varytec

Varytec BAT.PAR 8 RGBW User manual

Varytec

Varytec LED Giga Bar 4 User manual

Varytec

Varytec LED PAD 147 User manual

Varytec

Varytec VP-m5 User manual

Varytec

Varytec Theaterspot Pro 650 User manual

Varytec

Varytec Hero Wash 300 FC User manual

Varytec

Varytec VR-260 User manual

Varytec

Varytec Hero Wash 300 TW User manual

Varytec

Varytec Laser Moonstar MK II User manual

Varytec

Varytec Hero Wash 340FX RGBW Zoom User manual

Varytec

Varytec Street Bar IP65 16x3W TW User manual

Varytec

Varytec Easy Move XS HP Wash User manual

Varytec

Varytec Hero Mirror Moving Head User manual

Varytec

Varytec Event Par IP65 4in1 14x8W User manual

Varytec

Varytec PAR 56 short User manual

Varytec

Varytec Theaterspot Pro 300 fresnel User manual

Varytec

Varytec Lighting equipment User manual

Varytec

Varytec GLC-1 User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions