Vanco AMP202 User manual
VANCO INTERNATIONAL
1
1 x 2 HDTV Digital Bi-Directional Signal Amplifier
Part No: AMP202
Features:
•Designed for a distribution system, which requires bi-directional transmission such as interactive
CATV/SMATV system and hotel pay TV and guest information system.
•Main Power Supply: 12V DC
•Gain Linearity
•Low running cost permits continuous operation.
•Built-in red LED indicator lights when power is on.
•1 input – 2 output, Bi-directional amplifier with return path
•Insertion Loss: - 5 dB
Specifications:
ITEM
Specification
Number of input
1
Number of output
1
Forward
path
54-1000
Frequency Range (MHz)
Reverse
path
5-40
Forward
path
11±2
Gain(dB)
Reverse
path
7±2
Noise figure (dB)
≤4
Return Loss( IN _OUT )(dB)
≥12
MAX output level @-60dB IMD(dB_V)
≥98
DC PASS (OUTPUT)
YES
Main Power Supply (Red LED)
12V DC
R.F. Shielded
YES
Installation:
FM antenna
VHF/UHF
antenna
VANCO INTERNATIONAL
2
STEP 1
Make out the signal input port first, and then connect antenna signal output port to the amplifier input port with coaxial cable.
STEP 2
Position the 75 ohm coaxial cable as requested, install F female connector to the cable.
STEP 3
Insert the power supply “F” Connector to 12V DC on AMP202 then plug into the socket of 120V 60 Hz, now the amplifier is
available.
Safety notice:
1. Don’t connect the amplifier to TV/Video/Radio before carefully reading the User’s Manual.
2. Read the instructions carefully before installation.
3. Please follow the diagram to install needed electrical devices.
4. Indoor use only! Do not expose this appliance to rain, sunlight, water or a wet location (i.e. bathtub, wash bowl, kitchen sink,
laundry tub or swimming pool, etc.). Note, the apparatus should not be exposed to dripping or splashing liquids and no objects
filled with liquids, such as vases, should be placed on it.
5. Do not insert any metallic object through the ventilation grills. Do not use this product near naked flame sources, such as a
lighted candle.
6. Do not attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltage or other
Hazards. Refer all servicing or repairs to a qualified service technician.
Vanco International
Batavia, IL 60510, USA
www.vanco1.com
AMP202
12VDC IN
OUT1
12VDC IN OUT2
IN
12VDC IN
Reverse path
Forward path
Table of contents
Other Vanco Extender manuals
Vanco
Vanco 280544 User manual
Vanco
Vanco VPW-280572 User manual
Vanco
Vanco HD4KEX30 User manual
Vanco
Vanco EVOLUTION EVEXARC1 User manual
Vanco
Vanco EVOLUTION EVEXUSB2 User manual
Vanco
Vanco Evolution EVEXHDB1 User manual
Vanco
Vanco Evolution EVEXKVM1 User manual
Vanco
Vanco HDEX60 User manual
Vanco
Vanco PulseAudio PAEXARC1 User manual
Vanco
Vanco EVEXHDB2 User manual
Vanco
Vanco 280547 User manual
Vanco
Vanco VPW-280577 User manual
Vanco
Vanco EVEXVGAHD User manual
Vanco
Vanco HDEXWIR User manual
Vanco
Vanco EVEX2003 User manual
Vanco
Vanco HDEX60 User manual
Vanco
Vanco EVEX2006 User manual
Vanco
Vanco Evolution EV4K2006 User manual
Vanco
Vanco Evolution EVEXWHDMI User manual
Vanco
Vanco Evolution EVEXKVM3 User manual
