Unitech EA520 User manual

EA520 Wearable Kit

Quick Start Guide

V1.3

Package

Adjust the Wearable Kit

Please make sure the following contents are in the

EA520 wearable kit gift box.

If something is missing or damaged, please contact

your unitech representative.

• EA520 Wearable Kit with bracket, strap and pad

(PN#3210-900032G)

The Package Contents

How to Attach the Wearable Kit

Slide the EA520 terminal from top to bottom, then press

down to secure in place.

You can adjust the wearable kit according to your wrist

circumference by opening either side of the strap.

Wear On

Wear on the wrist holder kit, then you can start your

mobility work.

Note:Make sure the barcode engine is facing the front.

Wearing on the left arm

Wearing on the right arm

Note:You can use the single slot USB/charging cradle

or USB Type-C cable without removing the wearable kit

after removing the detachable part on the single slot

cradle

To ensure the unit working properly, please keep all

connectors away from the contaminants staying inside of

them such as dust, grease, mud, and water.

The negligence may cause the unit with no communication,

short circuited, overheated and so on.

If the connector is damaged, please ensure the connector is

being fully repaired before using the unit to avoid causing

short circuited.

WARNING!

There is a risk of fire and burns if the battery is handled improperly.

DO NOT disassemble, crush, puncture, short external contacts, or

dispose the battery pack in fire or water.

DO NOT attempt to open or service the battery. Dispose of used

batteries according to local recycling guidelines in your area.

CAUTION!

Copyright 2022 unitech Electronics Co., Ltd. All rights reserved.

unitech is a registered trademarkof unitech Electronics Co., Ltd.

http://www.ute.com/

How to Remove the Boot Case

1. Grab on the top two corners of the boot case and

bent toward the direction of your chest until the top

of the terminal is detached from the boot case.

2. Use your thumbs and push the EA520 terminal on

its yellow part, until the terminal completely detaches

from the boot case.

How to Remove Wearable Kit

There is a gray button on the left side of the wearable kit.

1. Push the button up.

2. Keep holding the button and pull the wearable kit

toward the direction of your chest to remove.

How to Remove Wearable Kit

Other manuals for EA520

7

Other Unitech PDA manuals

Unitech

Unitech PA966 Installation and operation manual

Unitech

Unitech PA820 User manual

Unitech

Unitech PA600 User manual

Unitech

Unitech PA982 User manual

Unitech

Unitech PA600BT User manual

Unitech

Unitech PA970 User manual

Unitech

Unitech PA520BTNF User manual

Unitech

Unitech PA600 User manual

Unitech

Unitech PA690 User manual

Unitech

Unitech PA600 User manual

Unitech

Unitech PA968 User manual

Unitech

Unitech EA320 User manual

Unitech

Unitech PA970 User manual

Unitech

Unitech EA502 User manual

Unitech

Unitech PA760 User manual

Unitech

Unitech PA960 Installation and operation manual

Unitech

Unitech PA960 User manual

Unitech

Unitech RFID HF Model User manual

Unitech

Unitech PA600 User manual

Unitech

Unitech MR650 Installation and operation manual

Unitech

Unitech PA970 User manual

Unitech

Unitech RH767 User manual

Unitech

Unitech PA962 User manual

Unitech

Unitech HT580 User manual

Popular PDA manuals by other brands

SPOT

SPOT SPOT user guide

Palm

Palm handheld Getting started guide

Winmate

Winmate E500QK user guide

Getac

Getac PS236 Specifications

Sharp

Sharp CE-1600P Operation manual

HTC

HTC PHAR100 user manual

Mindeo

Mindeo M40 Reference manual

Acer

Acer n30 manual

ASCOM

ASCOM 9D24 EX brochure

HandHeld

HandHeld Nautiz X3 user manual

Casio

Casio PALM manual

Sharp

Sharp TM-20 Software guide

Atid

Atid AT870 quick guide

AML

AML M7225 user guide

Audiovox

Audiovox Maestro Quick start card

Casio

Casio PV-750 Plus Function guide

PSC

PSC Falcon 4220 installation guide

Datalogic

Datalogic ELF quick start guide