Unitech PA968 User manual

PA968 Rugged Mobile Computer

Quick Reference Guide

alpha

TAB

tuv

FUNC

abc

2def

ghi

4jkl

mno

pqrs

wxyz

ESC Enter

Unitech is a member of the Oracle Embedded Software Licens-

ing Program

400649G Version 1.0

Package Contents

Make sure the following items are in the PA968 box. Please contact a

regional Unitech representative if anything is missing or damaged.

PA968 Battery Pack

Stylus and Elastic Bungee AC Adapter and Cable

Unitech CD-ROM

(User’s Manual)

USB Communication Cable

alpha

TAB

tuv

FUNC

abc

def

ghi

jkl

mno

pqrs

wxyz

ESC Enter

English

Front View

1Status Indicator. 6Receiver.

2LCD Touch-screen. 7Scanner Trigger Button.

3Microphone. 8Keypad.

4Power Button 9Universal Connector.

5Fingerprint Reader.

English

Rear View

Installing the Battery

1 Open the PA968’s Battery Compart-

ment Cover by sliding the Battery Com-

partment Tabs in the direction as shown

in the illustration to the right.

1Earphone Jack. 6 Antenna.

2RESET Button. 7 Digital Camera.

3Speaker. 8 LED Flashlight.

4Battery Compartment. 9 Memory Card Slot.

5Barcode Scanner Window. 10 Battery Compartment Tab.

Battery

Compartment

Tab

English

2 Turn the Backup Battery Switch to the

left in the ON position.

3 Position the Battery so the Battery Con-

tacts align with the Battery Compart-

ment Contacts. Place the Battery on top

of the Plastic Tab.

4 Simultaneously slide the Battery Pack

into the Battery Compartment while

pulling up on the Plastic Tab, until the

Battery snaps into place.

5 Replace the Battery Compartment

Cover. Push the Battery Compartment

Tabs down and slide them in the direc-

tion as shown on the illustration to the

right.

NOTE: Make sure the Battery Compartment closes securely, or the PA968 may

not start.

Backup Battery

Switch

Battery

Contacts

Compartment

Plastic Tab

English

Charging the Battery

CAUTION! Turn the Backup Battery Switch to the ON position before charging

the Battery.

1 Press and hold the USB Charging Cable’s release buttons and connect it to the

PA968 (1).

2 Plug the AC Adapter Cable into the USB Charging Cable’s power jack (2).

3 Plug the other end of the AC Adapter Cable into an electrical outlet (3).

Using the SD/MMC memory card

1 Rotate the screws counterclockwise

with a screwdriver to remove the SD

Card Slot Cover.

2Insert the SD Card with the notched end

facing up and in, as shown in the illus-

tration to the right.

Using the SIM card

The PA968’s GPRS SIM Card Slot is inside the Battery Compartment.

CAUTION! Please backup data to prevent data loss before installing the SIM

Card.

1 Remove the Battery Compartment

Cover and the Main Battery.

2 To open the SIM Card Slot, move the

Slot Cover to the left.

3 Lift the cover up, and insert the SIM

Card inside the slot with the notched

end facing up.

4 Place the cover down, and slide it to the

right in the lock position.

5 Put the Battery back into the Battery

Compartment and replace the Battery

Compartment Cover.

English

Keypads and Function Buttons

“Numeric mode on” is the PA968’s default condition. But, “CAPS mode off” is

the default condition in Alpha mode. Use the Alpha key to toggle into CAPS

mode.

Key Description

Power button.

Escape key.

Enter key.

Backspace key.

Tab key.

Function key.

Alpha key, toggle between numeric and alphabetic entry modes.

Four way cursor keys.

Alphanumeric keys.

Punctuation key.

Hotkeys.

alpha

TAB

tuv

FUNC

abc

2def

ghi

4jkl

mno

pqrs

wxyz

ESC Enter

ESC

Enter

TAB

FUNC

alpha

0wxyz

H1 H2

English

Using Function keys

Using Alpha keys

Key Description

Toggle LCD backlight on and off.

Toggle keypad LED backlight on and off.

Increase screen brightness.

Decrease screen brightness.

Bring up Task Manager.

Bring up Scanner Control Panel.

Bring up Power Properties.

Bring up Device Setting.

Key Alpha Off Alpha On

CAPS Off CAPS On

0 Space, @, $, “, 0 Space, @, $, “, 0

1 +, -, \, %, 1 +, -, \, %, 1

2 a, b, c, 2 A, B, C, 2

3 d, e, f, 3 D, E, F, 3

4 g, h, i, 4 G, H, I, 4

5 j, k, l, 5 J, K, L, 5

6 m, n, o, 6 M, N, O, 6

7 p, q, r, 7 P, Q, R, 7

8 t, u, v, 8 T, U, V, 8

9 w, x, y, z, 9 W, X, Y, Z, 9

. , ; ! . / , ; ! . /

FUNC +

FUNC

FUNC +

FUNC +mno

FUNC +pqrs

FUNC +tuv

FUNC +wxyz

abc

def

ghi

jkl

mno

pqrs

tuv

wxyz

English

Turning the PA968 on for the First Time

Charge the PA968 for at least 16 hours before initial use.

Powering On

1. Press the Power Button on the PA968’s front panel.

Calibrate Screen

The Calibration screen automatically appears when the PA968 powers on for

the first time, or after the system is reset.

Use the stylus to tap a sequence of target marks on the PA968’s screen.

Firmly hold the stylus on top of the target mark for a moment, and then

remove. Continue to tap the target mark as it stops along the corners of the

screen.

After the calibration is complete, press Enter to confirm the calibration set-

ting, or press ESC to cancel the setting.

Other manuals for PA968

Table of contents

Popular Handheld manuals by other brands

Honeywell

Honeywell Dolphin 9900 user guide

Honeywell

Honeywell CN75 user guide

MiTAC

MiTAC Mio 168 user manual

Wasp

Wasp WDT92 user manual

Texas Instruments

Texas Instruments TI-Nspire user guide

AXEM Technology

AXEM Technology MBS user guide

Armstrong

Armstrong Brain Wave Hardware & software installation

Symbol

Symbol MC9000-G Product reference guide

Ingenico

Ingenico IWL220 GPRS Quick reference guide

Intermec

Intermec CK61 user manual

Symbol

Symbol c2000 user manual

Symbol

Symbol MC18 Product reference guide

Acer

Acer n20 manual

Intermec

Intermec CK61 quick start guide

Docomo

Docomo F-04H instruction manual

Toshiba

Toshiba e350 Series user manual

Palm

Palm Tungsten E2 supplementary guide

Alien

Alien ALR-H460 user guide