Unit UT361 User manual
1
UT361/UT362 OPERATING MANUAL
Table of Contents
Title Page
Overview
Unpacking Inspection
Rules For Safety Operation
The Anemoscope Structure
Display Symbols
Setting Up The Anemoscopes
Using The Anemoscopes
Measuring Wind Speed
Computer Connectivity (For UT362 only)
Maintenance
Technical Specification
2
3
4
7
8
14
16
21
23
24
27
2
UT361/UT362 OPERATING MANUAL
Overview
Model UT361 and UT362 are an anemoscopes with high accurate sensitive resistance
(NTC) as testing point. For fan axis, it uses a high durable ruby shaft in order to
provide the accurate and stable measurement. It also comes with 8 digits chip to
conduct the digital mode and double display (VEL + Temperature, Flow + Area)
Model UT361 and UT362 come with the real time wind speed measurement, including
m/s, km/h, ft/min, MPH, KNOT, CFM, CMM as measuring units. In addition, it can
provide maximum value, minimum value, average value record, Centigrade temperature
and Fahrenheit temperature.
For data storage record, the maximum is 2,044 records capability. In sync, it can
provide auto switch down and continuity use functions.
Model UT362 can work with the computer to conduct the real time wind speed, data
transmitting storage and analysis as well as printing purpose.
This Operating Manual covers information on safety and cautions. Please read the
relevant information carefully and observe all the Warnings and Notes strictly.
3
UT361/UT362 OPERATING MANUAL
Item
1
2
3
4
Description
English Operating Manual
USB Interface Cable (UT362) only
Software (UT362) only
9 V Battery Software
Qty
1 piece
1 piece
1 piece
1 piece
Warning
To avoid electric shock or personal injury, read the "Rules for Safe Operation"
carefully before using the Anemoscope.
Unpacking Inspection
Open the package case and take out the Meter. Check the following items carefully
to see any missing or damaged part:
4
UT361/UT362 OPERATING MANUAL
In the event you find any missing or damage, please contact your dealer immediately.
In this manual, a Warning identifies conditions and actions that pose hazards to the
user, or may damage the anemoscopes or the equipment under test.
A Note identifies the information that user should pay attention to.
Rules For Safety Operation
Warning
Before using the anemoscopes inspect the case,do not use the anemoscopes if it is
damaged or the case (or part of the case) is removed. Look for cracks or missing
plastic
Pay attentions to the insulation around the connections.
5
UT361/UT362 OPERATING MANUAL
To avoid possible electric shock or personal injury and to avoid possible damage to
the anemoscopes or to the equipment under test, adhere to the following rules
Do not use your hand to touch the fan and / or the measurement of wind count
and temperature portion
Replace the battery as soon as the battery indicator appears
If anemoscopes is in abnormal function stage, please stop to use it and sent it
your nearby service center for the further investigation.
Before using the anemoscopes inspects the case, do not use the anemoscopes
if it is damaged or the case (or part of the case) is removed. Look for cracks or
missing plastic. Pay attentions to the insulation around the connections.
Do not use the anemoscopes in an environment of explosive, humidity, inflammable.
The performance of the anemoscopes may deteriorate after dampened.
6
UT361/UT362 OPERATING MANUAL
Use the specific authorized replacement part if you need to repair the anemoscopes
Do not use the anemoscopes if the opening the housing cover
Note the battery " + " and " - "pole when battery insert.
Followings are the condition which cause anemoscopes damages. Please carefully
use it to avoid any unit damage
Select the appropriate wind speed before use, it may avoid to load wind speed
(0 ~ 30 m/s), under the unknown scenarios.
Select the temperature meaning in 0 to 40 in order to avoid any fan damage
caused by the high temperature.
Do not try to recharge the battery.
UT361/UT362 OPERATING MANUAL
The Anemoscope Structure (see figure 1)
Fan
Wind Speed Indicator
Handle
Secondary Display
Primary Display
Power Button
Operational Button
Main Unit
1
2
3
4
5
7
6
8
Figure 1 7
8
UT361/UT362 OPERATING MANUAL
Display Symbols (see figure 2)
Figure 2
9
UT361/UT362 OPERATING MANUAL
Functional Signs
Below table indicated for information about the functional sign operations.
Number
1
2
3
4
5
6
7
8
9
Sign
MAX
MIN
AVE
READ
REC NO.
USB
VEL
Meaning
Display of Maximum Reading
Display of Minimum Reading
Data Hold is on
Display of Average Reading
Display of Data Storage Measurement Reading
Display of Data Storage
USB is on
Wind Speed Measurement
The battery is Low
10
UT361/UT362 OPERATING MANUAL
Number
10
11
12
13
14
15
16
17
18
Meaning
Secondary Data Display
Primary Data Display
Wind Speed Unit - Foot Per Minute
Wind Speed Unit - Meter Per Second
Fahrenheit Temperature Signal / Centigrade Temperature Signal
Cubic Feet Per Second
Cubic Meter Per Minute
Knots Per Hour
Miles Per Hour
Sign
ft/min
m/s
/
CFM
CMM
KNOTS
MPH
Other manuals for UT361
1
This manual suits for next models
1
Table of contents
Other Unit Test Equipment manuals
Unit
Unit UT502A User manual
Unit
Unit UT526 User manual
Unit
Unit UTD2052CL+ User manual
Unit
Unit UT2000 series User manual
Unit
Unit MSO/UPO2000 Series Owner's manual
Unit
Unit UPO1000CS Series User manual
Unit
Unit UPO2000CS Series User manual
Unit
Unit UT5583 User manual
Unit
Unit UT512 User manual
Unit
Unit UTL8200 Series User manual
Unit
Unit UT501B User manual
Unit
Unit UPO1000 Series User manual
Unit
Unit UT516B User manual
Unit
Unit UPO2102 User manual
Unit
Unit UTD1025CL User manual
Unit
Unit UT659A User manual
Unit
Unit UT90C User manual
Unit
Unit UT590 Series User manual
Unit
Unit utd2000 User manual
Unit
Unit UTD2000CEX+ Series User manual
