Ubiquiti GigaBeam GBE User manual

Table of contents

Other Ubiquiti Wireless Access Point manuals

Ubiquiti

Ubiquiti airFiber AF-24-US User manual

Ubiquiti

Ubiquiti R5AC-PTP User manual

Ubiquiti

Ubiquiti UnFi UAP-AC-LITE User manual

Ubiquiti

Ubiquiti NanoStation 5AC Loco User manual

Ubiquiti

Ubiquiti UniFi nanoHD UAP-nanoHD User manual

Ubiquiti

Ubiquiti UAP-PRO User manual

Ubiquiti

Ubiquiti UniFi USW-Flex-Mini User manual

Ubiquiti

Ubiquiti airCube ISP User manual

Ubiquiti

Ubiquiti UniFi UAP-IW-HD User manual

Ubiquiti

Ubiquiti NanoStation NSM2 User manual

Ubiquiti

Ubiquiti UniFi User manual

Ubiquiti

Ubiquiti UniFI UAP-AC User manual

Ubiquiti

Ubiquiti NanoStation loco User manual

Ubiquiti

Ubiquiti UAP User manual

Ubiquiti

Ubiquiti UBB User manual

Ubiquiti

Ubiquiti PowerBeam AC PBE-5AC-620 User manual

Ubiquiti

Ubiquiti NanoStation NSM365 User manual

Ubiquiti

Ubiquiti UniFi Dream Machine Beacon User manual

Ubiquiti

Ubiquiti RocketM User manual

Ubiquiti

Ubiquiti UniFi AP BeaconHD User manual

Ubiquiti

Ubiquiti UniFi AC AP Mesh Pro User manual

Ubiquiti

Ubiquiti airFiber AF-11FX User manual

Ubiquiti

Ubiquiti Uni-fi AP User manual

Ubiquiti

Ubiquiti airFiber AF-5XHD User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide

Draytek

Draytek VIGORAP 902 user guide

EnGenius

EnGenius EAP350 user guide

60 GHz/5 GHz Radio System

with 1Gbps+ Throughput

Model: GBE

Package Contents

GBE Ball Joint

Mount

Lock Ring

Metal Strap Gigabit PoE (24V, 0.5A)

with Mounting Bracket

Power Cord

Installation Requirements

• Pole-mounting: 7 mm socket wrench or screwdriver

• Wall-mounting: wall fastener (not included)

• Shielded Category 5 (or above) cabling with drain wire

should be used for all wired Ethernet connections and

should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial-grade, shielded Ethernet cable from Ubiquiti.

For more details, visit ui.com/toughcable

• Surge protection should be used for all outdoor installations.

We recommend that you use two Ethernet Surge Protectors,

model ETH-SP-G2, one near the device and the other at

the entry point to the building. The ETH-SP-G2 will absorb

power surges and safely discharge them into the ground.

LAN

ETH-SP-G2

ETH-SP-G2

ES-8-150W

GBE

Hardware Overview

1Reset Button

To reset to factory defaults, press and hold the Reset button for more

than 10 seconds while the device is poweredon. Alternatively, the

device may be reset remotely via a Reset button located on the bottom

of the Gigabit PoE Adapter.

2Ethernet Port

This Gigabit Ethernet port is used to connect the power and should be

connected to the LAN and DHCP server.

LEDs

3

4 6

57

3

GPS

Lights steady blue when there is a strong GPS signal. .

460 GHz

Lights steady blue when 60 GHz link is ready.

55 GHz

Lights steady blue when the 5 GHz link is ready.

6

LAN

The LED will light steady blue when an active Ethernet connection is

made to the Ethernet port and ash when there is activity.

7

Power/Status

Color Status

Flashing White Bootup is in progress.

White Ready for use; UNMS is disabled.

Blue Ready for use; UNMS is enabled and connected.

Steady Blue with

Occasional Flashing

Ready for use; UNMS is enabled but not

connected.

Quickly Flashing Blue Used to locate device from UNMS or web.

Alternating

Blue/White Firmware upgrade is in progress.

Hardware Installation

Go to the appropriate mounting instructions: Pole Mounting

or “Wall Mounting”.

Pole-Mounting

1.

2.

3.

4.

Wall Mounting

The device must be mounted directly to a wood stud or other

structurally stable surface to avoid damage to the mounting

hole when you adjust the aim.

Optional Accessory

To enhance stability, you can use the NanoBeam® Wall Mount

Kit, model NBE-WMK (soldseparately).

Note: Center screw included. Two optional screws (not

included) provide additional stability.

Installation Instructions

1.

2.

3.

OR

Fastener (not included) NanoBeam Wall Mount Kit

4.

Aiming

1.

2.