Ubiquiti USW-24 User manual
Device overview
Package content
System Requirements
UniFi Controller Software v5.12.x or later, available at: ui.com/
download/unifi
USW-24 Quick Start Guide
Bracket Screws (Qty: 8)
UniFi Switch
Set Screws (Qty: 4) Cage Nuts (Qty: 4)
Rack mount brackets
(qty: 2)
Power cord
Linux, Mac OS X or Microsoft Windows 7/8/10
Java Runtime Environment 1.6 (1.8 or later is recommended)
Web browser: Google Chrome (other browsers may have limited
functionality).
IMPORTANT: We strongly recommend using power regulation and
supporting an uninterruptible power supply to prevent equipment damage
due to local AC power stability issues.
Blinking indicates activity
RJ45 (ports 1 - 24)
Connect the included power cord to the power port.
steady blue light
Phillips screwdriver
Standard size, 19" rack width with a minimum 1U height For indoor applications, use Category
5 (or higher) UTP cabling certified for indoor use.
location animation
Amber
SFP (ports 25 - 26)
Starting.
not connected
RJ45 Speed/Link/Activity LED (Ports 1 - 24)
Green
Network approval successful and correct operation.
Blinking indicates activity
Blinking indicates activity
The SFP ports are hot-swappable and support 1 Gbps connections.
Restore Factory Default Settings: Press and hold the Reset button for more than five seconds.
For outdoor applications, Category 5 (or higher) shielded cabling must be used for all Ethernet
connections and must be connected to the AC ground of the power supply.
not connected
This button has two functions on the UniFi Switch:
fixed white light
Link established at 1000 Mbps
Green
power port
RJ45 ports support 10/100/1000 Ethernet connections.
This indicates you have clicked Locate in the UniFi controller
software. The software will also show the location of the device
on the map.
SFP Link/Activity LED (Ports 25 - 26)
Reset button
disabled
disabled
startup animation
Reset – Quickly press and release the Reset button.
Factory defaults, pending approval.
Link established at 1 Gbps
Link established at 10/100 Mbps
installation requirements
Power connection
ethernet connection
SFP connection
1.
2.
3.
Implementation of the UniFi switch
Software installation
Once you have installed the software and run the UniFi Setup Wizard, a login
screen for the UniFi Controller management interface will appear. Enter the administrator
name and password you created and click Sign In.
Download and install the latest version of the UniFi driver software at
ui.com/download/unifi and follow the instructions on the screen.
For information on setting up and using the UniFi Controller software, see the user
guide located on our website: ui.com/download/unifi
To deploy the UniFi Switch, go to "UniFi Switch Deployment".
Note: If you already have UniFi driver version 5.12.x or later installed, go to the
"UniFi Switch Deployment" section.
You can manage your wireless network and view network statistics through the UniFi
Controller's management interface.
1. From the UniFi controller panel, click Devices on the left menu bar.
Red
CA/CC, interno, 36 W
ETC-24
Interfaces
442,4 x 200 x 43,7 mm
(17,42 x 7,87 x 1,72")
feeding method
Dimensions
Management Ethernet and bandwidth
24 x 10/100/1000 RJ45 ports 2 x 1G SFP
Ethernet ports
Supported voltage range
2,70 kg (5,95 lb)
2,79 kg (6,15 lb)
Power supply
With rack mounting brackets
From 100 to 240 V AC
Weight
100-240 V AC, 50/60 Hz, universal input
3. The screen turns blue to confirm that the UniFi Switch has been deployed
2. On the Devices screen, locate the UniFi Switch in the list of
successfully.
devices in the Model column. To approve the UniFi Switch, click Adopt.
specs
3. This equipment is provided with a detachable power cord having an integral safety ground wire intended
for connection to a safety grounded receptacle. a. Do not substitute the power cord with one other than
the approved type supplied. Never use an adapter plug to connect to a 2-wire outlet, as this will break
the continuity of the ground wire.
1. Compliance is required with respect to the voltage, frequency, and current requirements indicated on the
manufacturer's label. Connection to a power source other than those specified may result in malfunction,
damage the equipment, or present a fire hazard if limitations are not followed.
c. Contact a qualified electrician or the manufacturer if you have questions about the
2. There are no operator serviceable parts inside this equipment. Service should only be provided by a
qualified service technician.
b. The equipment requires the use of the ground wire as part of the safety certification, modification or
misuse can create a risk of electric shock which can result in serious injury or death.
d. Protective ground connection is provided by a listed AC adapter. The building installation must provide
adequate backup protection against short circuits. and. Protective ground connection is provided by
a listed AC adapter. The building installation must provide adequate backup protection against short
circuits.
Safety notices
Compliance
limited warranty
electrical safety information
2. Pay attention to all warnings.
WARNING: Failure to provide adequate ventilation may cause a fire hazard. Leave at least 20mm of free
space next to the ventilation holes for proper airflow.
WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
3. Use only attachments / accessories specified by the manufacturer.
1. Read, follow and save these instructions.
WARNING: Avoid using this product during a lightning storm. There may be a remote risk of electric shock
from lightning.
WARNING: Do not use this product in a place that can be submerged in water.
-5 to 45° C (23° F to 113° F)
Shocks and vibrations
ESD/EMP protection
ETSI300-019-1/4 standard
ui.com/support/warranty The
limited warranty requires the use of arbitration to resolve disputes on an individual basis and, where appropriate, specifying
arbitration instead of jury trials or class actions.
operating humidity
CE, FCC, IC
Operating temperature
10 to 90% non-condensing
Luces LED
25W
Speed/link/activity
maximum power consumption
Certifications
SFP data port
Air: ±16 kV, contact: ±12 kV
RJ45 data port
Link/Activity
installation before connecting the equipment.
CE Marking
Australia and New Zealand
ISED Canada
Declaration of conformity
©2021Ubiquiti Inc. All rights reserved.
online resources
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Warning: This equipment complies with Class A of CISPR 32. In a residential
environment, this equipment may cause radio interference.
1. This device may not cause harmful interference, and 2. This
device must accept any interference received, including interference that may cause
undesired operation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions.
WEEE Compliance Statement
CAN ICES-3(A)/NMB-3(A)
The CE marking on this product indicates that the product complies with all directives that
apply to it.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Other manuals for USW-24
3
Table of contents
Other Ubiquiti Network Hardware manuals
Ubiquiti
Ubiquiti Loco5AC User manual
Ubiquiti
Ubiquiti UniFi LED ULED-AT User manual
Ubiquiti
Ubiquiti airMAX PowerBridge M10 PBM10 User manual
Ubiquiti
Ubiquiti UF-AE User manual
Ubiquiti
Ubiquiti UAP-AC-PRO User manual
Ubiquiti
Ubiquiti PowerBeam M PBE-M2-400 User manual
Ubiquiti
Ubiquiti UFiber OLT User manual
Ubiquiti
Ubiquiti UniFi US-48-500W User manual
Ubiquiti
Ubiquiti PowerBeam M5 User manual
Ubiquiti
Ubiquiti PowerBeam airMAX AC Gen2 PBE-5AC-Gen2 User manual
Ubiquiti
Ubiquiti PBE-5AC-300-ISO User manual
Ubiquiti
Ubiquiti UF-OLT-4 User manual
Ubiquiti
Ubiquiti UniFi Dream Machine Pro User manual
Ubiquiti
Ubiquiti PowerBeam PBE-5AC-500 User manual
Ubiquiti
Ubiquiti UniFi NVR User manual
Ubiquiti
Ubiquiti Rocket R5AC-Lite User manual
Ubiquiti
Ubiquiti PowerBeam PBE-5AC-400-ISO User manual
Ubiquiti
Ubiquiti EdgeSwtch 5XP User manual
Ubiquiti
Ubiquiti mFi mPort User manual
Ubiquiti
Ubiquiti UniFi WiFi BaseStation XG User manual
Popular Network Hardware manuals by other brands
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL product manual
B&B Electronics
B&B Electronics ZXT9-IO-222R2 product manual
Yudor
Yudor YDS-16 user manual
D-Link
D-Link ShareCenter DNS-320L datasheet
Samsung
Samsung ES1642dc Hardware user manual
Honeywell Home
Honeywell Home LTEM-PV Installation and setup guide
