U-Reach Mini SAS Series User manual

Mini SAS Series

SAS-MS118

1-1 Duplicator and Sanitizer

User Manual

V A.02

1 
 
Index 
Product Disclaimer.....................................................................................................................2
Warranty....................................................................................................................................2
Piracy Statement........................................................................................................................2
Before You Start.........................................................................................................................3
Notice Symbols ..........................................................................................................................3
Product Overview ......................................................................................................................4
Function Table ...........................................................................................................................5
Function Introduction................................................................................................................8
1. Copy ..................................................................................................................................8
2. Compare............................................................................................................................9
3. Copy+Compare .................................................................................................................9
4. Erase..................................................................................................................................9
5. Utility ............................................................................................................................. 12 
6. Setup.............................................................................................................................. 14 
 
SAS-MS118 v A.02

Product Disclaimer

U-Reach is not accountable for any incidental or consequential damages, which

includes, but is not constrained to property harm, loss of time or data from use

of a U-Reach product, or any other damages attributable to product malfunction

or failure (including without limitation, those attributable to: (1) reliance of the

materials provided, (2) costs of product replacement, (3) loss of use, data or

profits, (4) delays or business interruptions, (5) and any principle of legal

responsibility, arising out of or in reference to the use or overall performance or

from delays in servicing or lack of ability to render service) of any U-Reach

product. U-Reach makes every effort to ensure proper operation of all products.

However, the customer is responsible to affirm that out of the U-Reach product

meets the customer’s quality requirement. The customer further acknowledges

that fallacious operation of U-Reach product and/or software program, or

hardware issues, can cause loss of data, defective formatting, or data loading. U-

Reach will make efforts to resolve or repair any issues recognized by customer

either within the warranty period or on a time and materials basis.

Specifications and features subject to change without notice or obligation.

Warranty

U-Reach provides a basic one-year parts and labor warranty for all of its

products (excluding cables, adapters, and other consumable items). An optional

extended warranty is also available for an added cost. Telephone and email

support is available for the life of the product as defined by U-Reach.

All warranties will be restricted and defined by the market region from which

customers purchased.

Piracy Statement

U-Reach accepts no responsibility for copyright infringement or misuse of any U-

Reach equipment. Copying all forms of data: audio, video, or software without

the permission of the copyright holder is illegal. It is the sole responsibility of the

user to ensure that the legal copyrights of the copyright owners are respected.

Before You Start

Important Notice

●Carefully read the entire manual before operating.

●Make sure the source device is correct and functioning.

●Equal capacity of source and target is recommended for guaranteed data consistency.

●Using the Copy+Compare function provides the most flawless duplication.

●Damage incurred due to non-compliance with our operating instructions will void the

warranty.

●Store the equipment safely when not in use and keep out of the reach of children.

●Please turn off duplicator before replacing sockets.

●Never turn off the power while the firmware updates.

●Use only approved, stable power sources.

●The power supply has overload protection. When it is overloaded and shutdown, please

unplug the power cord for 2 minutes for discharging.

●Use product only in a clean, dry, dust-free, and ventilated area. Liquids or foreign debris

can severely damage your duplicator.

●It is typical for the machine to heat up during operation.

●While in use, do not move the duplicator or remove SSDs.

●Static electricity may cause duplication error. Please pay attention to the duplicator’s

environment while operating equipment. Purchasing electricity elimination equipment

helps avoid shock.

●Devices will operate at high-temperatures during selected tasks.

●Wear protective gloves to prevent burns when handling devices.

Ensure machine and operator are properly grounded to prevent ESD.

Notice Symbols

Special items, procedures, or notes to be observed prior to use:

Note

Refers to related duplicator operations, special details, tips, or

suggestions for operational effectiveness.

Caution

Refers to procedures that need to be adhered to or precautions.

Product Overview

A. System Overview

B. LCD Configuration

Yellow: Powering

Green: Pass

Red: Fail

Backward

Forward

Confirm / OK

Cancel / Back

Copy

x1 2047M

0:11

0:11 41% 860M

Function

Time (mm:ss)

Copy Progress %

Copied Processed

size (Target)

Target HDD

Total size (Source)

Function Table

Function

Item & Description

1. Copy

Copies source device to connected target device(s). Refer to function

6.1 Copy Area for 4 different copy modes.

2. Compare

Verifies target device(s) bit by bit to the master device.

3. Copy

+Compare

Automates copy and compare by first duplicating and then verifying all

the data, bit by bit.

4. Erase

4.1 Quick Erase

Erases the index table only.

4.2 Full Erase

Erases the entire device capacity. Complies with NIST 800-88 Standards.

4.3 DoD erase

Erases device(s), complying with DoD 5220.22-M Standards.

4.4 DoD EraseComp

Erases device(s), complying with DoD 5220.22-M Standards and verifies

complete erasure.

4.5 7-Pass Erase

Erases device(s) 7 times complying with DoD 5220.22-M(ECE)

Standards.

4.6 Secure Erase

Erases the non-loadable areas complying with NIST 800-88 Standards.

4.7 Enhanced Secure Erase

Erases devices that support this feature.

4.8 Block Erase

Performs Secure Erase for SAS HDD.

4.9 Overwrite

Performs Enhanced Secure Erase for SAS HDD.

5. Utility

5.1 Show Disk info

Displays connected device(s) detail information.

5.2 Update system

5.2.1 Update BIOS

Updates system firmware from source

port.

5.2.2 Create Update HDD

Formats HDD with a 2GB FAT partition for

the operator to save the new firmware.

5.3 System Info

Displays information of the duplicator system, including controller

model number and firmware version.

5.4 Read Speed

Performs a full reading speed test on the desired, connected device(s).

5.5 Write Speed

Performs a full writing speed test on the desired, connected device(s).

5.6 Unlock HDD

Unlocks the HDD that has not completed Secure Erase so that the HDD

can continue to be used.

6. Setup

6.1 Copy Area

(Copy Modes)

6.1.1 System and Files

Copies only data and skips empty spaces.

Supports only NTFS, FAT16/32/64,

HFS/HFS+/HFSX, and EXT2/3/4/LVM.

6.1.2 All Partitions

Copies all partitions and data, unallocated

partitions not included.

6.1.3 Whole HDD

Copies all data and partitions including

proprietary formats.

6.1.4 Percentage (%)

Copies the defined capacity percentage

that operators set. (0%-99%)

6.1.5 Deep Analysis

Scanning the entire source HDD first, only

copy the blocks with data.

6.2 Copy GPT Backup Area

Enable this function to copy the end GPT format.

6.3 Copy HPA Mode

Do Not Copy

HPA

Keep Target HPA

Does not copy HPA data,

but keeps target device’s

original HPA setting.

Clear Target HPA

Does not copy HPA data

and clears target device’s

HPA setting.

Setting Target HPA

Copies HPA setting from source device to

target.

Copy and Setting

Copies HPA setting and data from source

device to target.

6.4 Skip Bad Sectors

Sets the number of bad sectors to skip. (0-65535 or unlimited)

6.5 Erase Master

Allows user to erase the source port or not.

6.6 Unknow Format

Copy Unknown

Copies unknown formats.

Skip Unknown

Skips unknown formats.

6.7 Erase Pattern

One Byte

Writes a random character per byte.

Big Random Data

Writes a set of random characters into a

set area.

6.8 Clear HPA at Erase

Clear HPA Setting

Clears HPA setting during erase.

Keep HPA Setting

Keeps original HPA setting during erase.

6.9 Language

Selects preferred language. English or Japanese

6.10 Delete Disk Signature

After Copy

Yes

Do not copy the disk signature onto target

devices.

6.11 Restore Default

Restores system back to factory defaults.

*Above functions and features subject to change without notice.

Function Introduction

1. Copy

The copy function copies data from source HDD to target HDD. You can set

following settings before copy. (You can check more detail in ”6. Setup”.)

I. Set Copy Area of Source HDD → 6.1 Copy Area

II. Set Copy Unknown Format Area → 6.6.1 Unknown Format

➢Start to copy

Step 1: Prepare Source & Targets

Prepare a source HDD and target HDDs.

(It’s strongly recommended that the source and target are the same capacity.)

Caution

Various adapters are required to copy devices with different

interfaces, e.g. eSATA, mSATA, M.2 SATA (NGFF) and etc.

Step 2: Connect Source & Targets

Connect source HDD to source port, target HDDs to Target ports.

Step 3: Enter Function "1.Copy"

Use ▲▼ to select "1.Copy", and then press "OK". Duplication will start.

The information below shows on the LCD during duplication.

Copy Process

(if there is any bad sector)

Copy 224M

0:02 85% 190M

Function

Total Data

Copied Data

Copied Time

Copy Process

Bad Sector R:0

0:01 48% W:1

Source bad sector

Target bad sector

Copied

Time

Copy Process

Step 4: Completion!

The copy result (Pass/Fail), total copy time and bad sectors will show on LCD.

Copy result

Pass

Fail

Note

The default setting of error counter is 0. If users want to adjust

the accepted error sectors of the HDD, they can set "Skip Bad

Sectors".

2. Compare

Proceed to verify device.

Caution

The user is responsible for verifying the targets’ quality. Please

pick a few completed targets for testing in a mass production

environment for QC.

3. Copy+Compare

The Copy+Compare function makes copies first and then compares copied HDDs

with source HDD to confirm the accuracy.

Note

It is recommended to execute Compare after Copy to confirm

the accuracy. Users can use the function “3. Copy+Compare”.

4. Erase

Please choose the appropriate erase method when you like to dispose or re-use

the HDDs. You can set the following settings before erasing:

(You can check more detail in ”6. Setup”.)

Pass 0:05

No Bad Sector!

Fail 0:05

Bad Sector R0 W1

Total copy time

This manual suits for next models

Table of contents

Other U-Reach Disc Duplicator manuals

U-Reach

U-Reach PRO218 User manual

U-Reach

U-Reach NVS200 User manual

U-Reach

U-Reach NV-BM Series User manual

U-Reach

U-Reach Carry Flash Series User manual

U-Reach

U-Reach CopyBox Pro User manual

U-Reach

U-Reach Silver Fox PRO User manual

U-Reach

U-Reach Intelligent U3 User manual

U-Reach

U-Reach Intelligent 9 Series User manual

U-Reach

U-Reach MTS-SAS Series User manual

U-Reach

U-Reach BD18 SERIES User manual

U-Reach

U-Reach SuperB USB3.1 User manual

U-Reach

U-Reach Carry HDD PRO118 User manual

U-Reach

U-Reach PRO368 User manual

U-Reach

U-Reach SAS Series User manual

U-Reach

U-Reach Super1 Series User manual

U-Reach

U-Reach Mini Series User manual

U-Reach

U-Reach Carry HDD miniSAS User manual

U-Reach

U-Reach Carry Flash UB600 User manual

U-Reach

U-Reach Carry Series User manual

U-Reach

U-Reach TP Series User manual

U-Reach

U-Reach UB300 User manual

U-Reach

U-Reach ImageExpress-IT300 User manual

U-Reach

U-Reach MD801 User manual

U-Reach

U-Reach MT Series User manual

Popular Disc Duplicator manuals by other brands

Riso

Riso CV Series Setting manual

MicroBoards Technology

MicroBoards Technology GX-2 user manual

Addonics Technologies

Addonics Technologies HDUS325DX user guide

Carry

Carry Pro118 user guide

CopyPro

CopyPro PowerPro II user manual

Primera

Primera Max user manual

Logicube

Logicube EchoPlus-NG user manual

Silca

Silca Delta 2000 SA operating manual

Reflex7

Reflex7 Daisy Chain Series user manual

Vinpower Digital

Vinpower Digital SharkCopier DC user manual

Codonics

Codonics Virtua E manual

Octave

Octave Copy Master II user guide

Kanguru

Kanguru U2-DVDDUPE-S user guide

StarTech.com

StarTech.com 8STSATDUP11 manual

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Service manual

Addonics Technologies

Addonics Technologies UDFH7 user guide

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 user manual

Addonics Technologies

Addonics Technologies CFASTD5 user guide