TRNDlabs BEAM User manual
BEAM
USER GUIDE
2
Welcome to the world of
TRNDlabs products!
TRNDlabs products are design focused
electronics, engineered to combine
ulmate performance and aesthecs.
WWW.TRNDLABS.COM
3
PACKAGE CONTENTS
Lightning to Micro USB Adapter
BEAM Powerbank
USB Charging Cable
4
FUNCTIONS
LED Indicator Light
Micro USB Plug
Lightning to Micro
USB Adapter
Micro USB Port
Lightning to Micro USB
Adapter Holder
5
SPECIFICATIONS
59 grams (2.08 ounces)
100 mm (l) x 62 mm (w)
2500 mAh
Weight
Size
Capacity
6
Connect the USB Charging Cable to a USB port 1 . Now connect the
Micro USB plug of the USB Charging Cable to the Micro USB port of
your BEAM 2 . The blinking LED light indicates the BEAM Powerbank
is charging. When the baery is fully charged, the LED light turns green.
CHARGING
1
2
1 2
7
CONNECTING
To connect BEAM to a mobile device, simply connect the Micro USB plug
1 of BEAM to the mobile device. For an iOS device, apply the addional
iOS Micro USB Adapter 2 onto the Micro USB plug and connect it with
the iOS device.
1 2
8
TROUBLESHOOTING
BEAM is not charging?
The charging cable is not
inserted properly.
BEAM is already fully
charged.
Charging oen interrupted?
The charging current is
too much (over-current
protecon).
Reconnect BEAM
9
SAFETY PRECAUTIONS
• Do not use BEAM in temperatures below -20 °C or above 40 °C or
in a humidity higher than 85%.
• Place BEAM at room temperature when charging.
• Store BEAM in a dry place. Never store it somewhere moist.
• Do not try to alter or disassemble BEAM. If there is a problem with
BEAM, contact the retailer for further assistance.
• When not in use, charge BEAM at least once every 3 months, to
avoid loss of baery life.
• Keep away from high voltage devices or re.
• This product is not a toy, please keep away from children.
10
FCC INFORMATION
This device complies with part 15 of the FCC Rules. Operaon is subject
to the following two condions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operaon. Changes
or modicaons not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Table of contents
Other TRNDlabs Accessories manuals
