4
List of Figures
Figure 2.0-1 - AMP-1030P Functional Block Diagram and Internal Connectivity...................................6
Figure 3.0-1 - AMP-1030P Packaging Box ..................................................................................................7
Figure 3.0-2 - ESD Container with AMP-1030P Inside ...............................................................................8
Figure 3.0-3 - AC/DC Plug Adapter, Ethernet Cable, USB Cable, and CD-ROM with USB GUI and
User’s Manual................................................................................................................................................8
Figure 4.2-1 -AMP-1030P Laser Radiation Safety Label for Class 1M Laser Product ............................8
Figure 5.1-1 - AMP-1030P USB GUI Installation Folder Contents on CD-ROM .....................................10
Figure 5.1-2 - Windows User Account Control Notification ...................................................................10
Figure 5.1-3 - USB GUI Installation Progress Window .............................................................................10
Figure 5.1-4 - USB GUI Installation Complete Window ...........................................................................11
Figure 5.2-1 - Example of AMP-1030P USB GUI Main Menu...................................................................12
Figure 5.2-2 - Error Message Displayed When AMP-1030P is Not Connected to USB Port .................12
Figure 6.0-1 - Two Methods of Using an Ethernet Interface to the AMP-1030P Module ....................13
Figure 6.2-1 - AMP-1030P IP Address Reset Button Location.................................................................16
Figure 7.1-1 - How to Move and Close the Main Menu Window, Open Device Info Window ............17
Figure 7.2.1-1 - Critical Status Area of the Main Menu, in both dBm and Watts ..................................17
Figure 7.2.2-1 - Key Control Functions on the Main Menu .....................................................................18
Figure 7.2.2-2 -LOS Active with Auto Shutdown Mode Enabled .........................................................19
Figure 7.2.2-3 -ACC Mode with a User Entered Setting of 160 mA for the Bias Current....................20
Figure 7.2.2-4 -APC Mode with a User Entered Setting of +4.0 dBm for the Output Power..............20
Figure 7.2.2-5 - LOS Indicator is Red When Optical Power Level is Less than LOS Level.....................21
Figure 7.2.2-6 – Comparison of Amplifier Operation with Auto Shutdown Mode Enabled Versus
Disabled.......................................................................................................................................................21
Figure 8.1.1-1 - Type Appropriate IP Address of Module to Access Home Page..................................22
Figure 8.1.1-2 - Optical Control and Status Page.....................................................................................23
Figure 8.1.1-3 – User Selects Watts to be Used for Displaying Input and Output Power ....................24
Figure 8.1.1-4 – User Enters -25 dBm for LOS Level and the LOS Alarm is Activated...........................25
Figure 8.1.1-5 – Comparison of Amplifier Operation with No Input Power and Auto Shutdown
Mode Enabled Versus Disabled.................................................................................................................25
Figure 8.1.1-6 -ACC Mode with a User Entered Setting of 170 mA for the Bias Current....................26
Figure 8.1.1-7 -APC Mode with a User Entered Setting of +5.0 dBm for the Output Power..............26
Figure 8.1.1-8 -Amplifier Output Disabled by the User.........................................................................27
Figure 8.1.1-9 -Continuous Update Box Should Remain Checked Under Most Conditions..............27
Figure 8.2-1 - System Status Information.................................................................................................28
Figure 8.2-2 -Click to Reset the Automatic Laser Shutdown Condition ..............................................28
Figure 8.3-1 - Ethernet Setup Controls with Factory Default IP Address ..............................................29
Figure 8.4-1 - Firmware Revision/Update Page, Browse to a File and Click Update to Begin
Downloading New Firmware ....................................................................................................................30
Figure 10.0-1 - AMP-1030P Module Mechanical Dimensions ................................................................33
