4
List of Figures
Figure 2.0-1 - AMP-1016B Functional Block Diagram and Internal Connectivity...................................6
Figure 3.0-1 - AMP-1016B Packaging Box ..................................................................................................8
Figure 3.0-2 - ESD Container with AMP-1016B Inside...............................................................................8
Figure 3.0-3 - AC/DC Plug Adapter, Ethernet Cable, USB Cable, and CD-ROM with USB GUI and
User’s Manual................................................................................................................................................8
Figure 4.1-1 - AMP-1016B USB GUI Installation Folder Contents on CD-ROM .......................................9
Figure 4.1-2 - Windows User Account Control Notification ...................................................................10
Figure 4.1-3 - USB GUI Installation Progress Window .............................................................................10
Figure 4.1-4 - USB GUI Installation Complete Window ...........................................................................10
Figure 4.2-1 - Example of AMP-1016B USB GUI Main Menu...................................................................11
Figure 4.2-2 - Error Message Displayed When AMP-1016B is Not Connected to USB Port .................11
Figure 5.0-1 - Two Methods of Using an Ethernet Interface to the AMP-1016B Module ....................12
Figure 5.2-1 - AMP-1016B IP Address Reset Button Location.................................................................15
Figure 6.1-1 - How to Move and Close the Main Menu Window, Open Device Info Window ............16
Figure 6.2.1-1 - Critical Status Area of the Main Menu, in both dBm and Watts ..................................16
Figure 6.2.2-1 - Key Control Functions on the Main Menu .....................................................................17
Figure 6.2.2-2 -LOS Active with Auto Shutdown Mode Enabled .........................................................18
Figure 6.2.2-3 -ACC Mode with a User Entered Setting of 200 mA for the Bias Current....................19
Figure 6.2.2-4 -APC Mode with a User Entered Setting of +16.3 dBm for the Output Power ...........19
Figure 6.2.2-5 - LOS Indicator is Red When Optical Power Level is Less than LOS Level.....................20
Figure 6.2.2-6 – Comparison of Amplifier Operation with Auto Shutdown Mode Enabled Versus
Disabled.......................................................................................................................................................21
Figure 7.1.1-1 - Type Appropriate IP Address of Module to Access Home Page..................................22
Figure 7.1.1-2 - Optical Control and Status Page.....................................................................................22
Figure 7.1.1-3 – User Selects Watts to be Used for Displaying Input and Output Power ....................23
Figure 7.1.1-4 – User Enters -2.5 dBm for LOS Level and the LOS Alarm is Activated..........................24
Figure 7.1.1-5 – Comparison of Amplifier Operation with No Input Power and Auto Shutdown
Mode Enabled Versus Disabled.................................................................................................................24
Figure 7.1.1-6 -ACC Mode with a User Entered Setting of 290 mA for the Bias Current....................25
Figure 7.1.1-7 -APC Mode with a User Entered Setting of +16.0 dBm for the Output Power ...........25
Figure 7.1.1-8 -Amplifier Output Disabled by the User.........................................................................26
Figure 7.1.1-9 -Continuous Update Box Should Remain Checked Under Most Conditions..............26
Figure 7.2-1 - System Status Information.................................................................................................27
Figure 7.2-2 -Click to Reset the Automatic Laser Shutdown Condition ..............................................27
Figure 7.3-1 - Ethernet Setup Controls with Factory Default IP Address..............................................28
Figure 7.4-1 - Firmware Revision/Update Page, Browse to a File and Click Update to Begin
Downloading New Firmware ....................................................................................................................29
Figure 9.0-1 - AMP-1016B Module Mechanical Dimensions ..................................................................32
