TRENDnet TEG-S16R - DATA SHEETS User manual
TEG-S16R
TEG-S24R
H/W: v1.0R
Quick Installation Guide
Table of Contents
Table of Contents
Version 02.05.2008
English ......................................................................................................
Technical Specifications .............................................................................
Troubleshooting ..........................................................................................
1
1
3
4
6
1. Before You Start
2. Hardware Installation .........................................................................
.................................................................................
Installation Requirements
?Computer with Network adapter installed
?RJ-45 Network Cable
?
?
?
?
The power outlet should be within 1.82 meters (6 feet) of the Switch
Make sure that there is proper heat dissipation and adequate
ventilation around the Switch
Do not place heavy objects on the Switch
EIA Standard, 19 inch rack or sturdy, level surface that can support the
weight of the Switch
Package Contents
1. Before You Start
English
1
?TEG-S16R/TEG-S24R
?
?
?
Quick Installation Guide
Power Cord
Rack Mount Kit
Application
English
2
10/100/1000Mbps
16-Port Compact Gigabit Switch
(TEG-S16R)
Printers
Workstations with PCI Adapter
(TEG-PCITXR)
Laptop with Gigabit PC Card
(TEG-PCBUSR)
Server with Gigabit PCI Adapter
(TEG-PCITXR)
10/100Mbps Multi-Port
Print Server
(TE100-P21)
300Mbps Wireless N
Gigabit Router
(TEW-633GR)
Cable /DSL Modem
Internet
10/100/1000Mbps
24-Port Compact Gigabit Switch
(TEG-S24R)
Printers
Workstations with PCI Adapter
(TEG-PCITXR)
Laptop with Gigabit PC Card
(TEG-PCBUSR)
Server with Gigabit PCI Adapter
(TEG-PCITXR)
10/100Mbps Multi-Port
Print Server
(TE100-P21)
300Mbps Wireless N
Gigabit Router
(TEW-633GR)
Cable /DSL Modem
Internet
2. Hardware Installation
English
3
1. Connect the Power Cord to
the TEG-S16R/TEG-S24R
and then to a power outlet.
2. Connect a CAT-5e RJ-45 network
cable from the computer to an
available Ethernet port on the
TEG-S16R/TEG-S24R.
Rack Mount
The TEG-S16R/TEG-S24R can be mounted in an EIA standard-size, 19-inch
rack, which can be placed in a wiring closet with other equipment.
1. Attach the mounting brackets to
the TEG-S16R/TEG-S24R's front
panel (one on each side), and
secure them with the provided
screws.
2. Carefully position the
TEG-S16R/TEG-S24R onto the
rack. Align the bracket to the
screw holes on the rack, then use
the screws provided with the
equipment rack to mount the
chassis.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
4
Standards IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
Protocol CSMA/CD
Data Transfer Rates
Ethernet: 10Mbps/20Mbps (Half / Full-Duplex)
Fast Ethernet: 100Mbps /200Mbps (Half /
Full-Duplex)
Gigabit Ethernet: 2000Mbps (Full-Duplex)
Network Cables Ethernet: UTP/STP CAT-3, 4, 5
Fast Ethernet: UTP/STP CAT- 3, 4, 5, 5e, 6
Gigabit Ethernet : UTP/STP CAT-5e, 6
Number of Ports
TEG-S16R: 16 x 10/100/1000Mbps
Auto-negotiation, Auto-MDIX ports
TEG-S24R: 24 x 10/100/1000Mbps
Auto-negotiation, Auto-MDIX ports
General
Topology
LEDs
Star
Power, Link/ACT, 10/100Mbps, 1000Mbps
Technical Specifications
5
Power 100-240VAC. 50/60Hz. Internal Power Supply
Power Consumption TEG-S16R: 14 Watts (Max)
TEG-S24R: 20 Watts (Max)
Temperature Operating: 0 ~ 40 C, Storage: -20 ~ 70 C° ° ° °
Dimensions (L x W x H) 280 x 180 x 45 mm (W x H x D)
Weight TEG-S16R: 1.7kg
TEG-S24R: 1.8kg
Physical and Environmental
Humidity
Certification
Operating: 10% ~ 90%, Storage: 5% ~ 90%
CE, FCC
Transmission Method Store-and-forward
MAC Address Table
RAM Buffer
Switching Fabric
8Kbytes Entries Per Device
500KB
TEG-S16R: 32Gbps
TEG-S24R: 48Gbps
MAC Address Learning Automatic update
Performance
6
Troubleshooting
Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
After connecting the Switch to a power outlet, the LEDs do not turn
on.
Check the connection of the external power adapter to the
TEG-S16R/TEG-S24R and the power outlet. Also check that the power
outlet is receiving power.
When I connect a computer to the Switch's port, I am not getting
Gigabit speeds. What should I do?
Check the LED on the Switch. When the LED is off, the computer's
connection speed is 10Mbps. When the LED is green the computer's
connection speed is 100Mbps. The computer's connection speed will be
Gigabit when the LED is amber. Make sure that you have a Gigabit
Ethernet adapter installed. Also make sure to use a Cat-5e or Cat 6
Ethernet cable. Some CAT-5 cables are not rated to run in Gigabit.
After I connect my PCs to the Switch, I am unable to share files.
First, check the LEDs on the Switch. Make sure the Link/Act LED is on.
Second, check the network cable. The minimum length of the cable is 1.5
meters and the maximum length of the cable is 100 meters. Third, disable
any software firewall program. Fourth, verify that you have file sharing
enabled. Please contact your Operating System support for more
information.
After I connect my PCs to the Switch, I can only get onto the Internet
from one computer.
The Switch was not designed to share Internet between multiple
computers. You need to get an Internet router such as the TEW-633GR.
If you still encounter problems or have any questions regarding the
TEG-S16R/TEG-S24R please contact TRENDnet's Technical Support
Department.
Limited Warranty
- 5-Year Warranty
TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
TEG-S16R/TEG-S24R
If a product does not operate as warranted above during the applicable warranty period,
TRENDnet shall, at its option and expense, repair the defective product or deliver to
customer an equivalent product to replace the defective item. All products that are
replaced will become the property of TRENDnet. Replacement products may be new or
reconditioned.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product through any unauthorized service center. This warranty is voided if
(i) the product has been modified or repaired by any unauthorized service center, (ii) the
product was subject to accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within the applicable
warranty period for a Return Material Authorization (RMA) number, accompanied by a
copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-
authorized by TRENDnet with RMA number marked on the outside of the package, and
7
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE
AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT
TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES
NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE
RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER
HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Note: AC/DC Power Adapter, Cooling Fan, Cables and Power Supply carry a 1-Year
Warranty
8
Other manuals for TEG-S16R - DATA SHEETS
2
This manual suits for next models
1
Table of contents
Other TRENDnet Switch manuals
TRENDnet
TRENDnet TK-803R User manual
TRENDnet
TRENDnet TE-910plus User manual
TRENDnet
TRENDnet TE100-S16 - DATA SHEETS User manual
TRENDnet
TRENDnet TEG-40080ES User manual
TRENDnet
TRENDnet TEG-S2500i User manual
TRENDnet
TRENDnet TEG-S5g - Gigabit GREENnet Switch User manual
TRENDnet
TRENDnet TU2-700 - DATA SHEETS User manual
TRENDnet
TRENDnet TE-800plus User manual
TRENDnet
TRENDnet TK-207K - KVM Switch - USB Quick start guide
TRENDnet
TRENDnet TE100-S24 - High Performance Auto-Sensing 10/100Mbps Fast Ethernet... User manual
TRENDnet
TRENDnet TE100-S1616V User manual
TRENDnet
TRENDnet TEG-3102WS User manual
TRENDnet
TRENDnet TE100-S50g User manual
TRENDnet
TRENDnet TE100-S1616V User manual
TRENDnet
TRENDnet TK-200K User manual
TRENDnet
TRENDnet TK-400 User manual
TRENDnet
TRENDnet TPE-S50 User manual
TRENDnet
TRENDnet TEG-S80g - Switch User manual
TRENDnet
TRENDnet TK-802R User manual
TRENDnet
TRENDnet TE-1710 User manual
