Trane TRANE Quantum CLCPEuro Operating and safety instructions

TRANE R

Installation

Operation

Maintenance

IND-SVN01A-E4

(Jan 2010)

TRANE

TRANE QuantumTM

Air Handler

Model: CLCPEuro

CLCPXP

TRANE R

Notice

World enviromental scientists have

concluded, based on the best currently

available evidence, that ozone in our

upper atmosphere is being reduced

due to the release of CFC fully

halogenated compounds.

The Trane Company urges that all

HVAC servicers working on Trane

equipment, or any manufacturer’s

products, make very effort to eliminate,

if possible, or vigorously reduce the

emission of CFC, HCFC and HFC

refrigerants to the atmosphere

resulting from installation, operation,

routine maintenance, or major service

on this equipment. Always act in a

responsible manner to conserve

refrigerants for continued use even

when acceptable alternatives are

available.

Refrigerant used in any type of air-

conditioning or refrigerating equip-

ment should be recovered for reuse,

recovered and / or recycled for reuse,

reprocessed (reclaimed), or properly

destroyed, whenever it is removed from

equipment. Never release to the

atmosphere!

Safety Considerations

The equipment covered by this manual

is designed for safe and reliable

operation when installed and operated

within its design specifcation limits. To

avoid personal injury or damage to

equipment or property while installing

or operating this equipment, it is

essential that qualified, experienced

personnel perform these functions

using good judgement and safe

pratices.

See the following cautionary

statement.

Warning and Cautions

Notice that WARNING and CAUTION

appear at appropriate intervals

throughout this manual.

WARNING indicates a potentially

hazardous situation that could result

in personal injury or death.

CAUTIONs are designed to alert you

to conditions that could result in minor

personal injury or equipment damage.

WARNING

CAUTION

TRANE R

Contents

General Information

Foreword

Warranty

Unit Description

Model Nomenclature

Receiving

Nameplate

Delivery Check

Resolving Shipping Damage

Storage Consideration

Outdoor Storage

Rigging and Handling

Off Loading

Moving to Position On Site

Forlift Trucks

Roller Movement

Installation

Foundation

Erection

Assembly and Installation

External Connection

Frame to Frame Connection, CLCP-euro

Panel to Frame Connection, CLCP-euro

Paneling, CLCP-euro

Frame to Frame Connection, CLCP-XP

Panel to Frame Connection, CLCP-XP

Vertical Unit / Final Filter / Damper Joining Method

Piping

Start-Up

Start-Up Procedures

Maintenance

Periodic Maintenance Checklist

Maintenance Plan

Trouble Analysis

General

Pulley and Belt

Appendix A-Unit Weight, CLCP-euro

Appendix B-Unit Weight, CLCP-XP

Appendix C-Fans and Arrangement

Appendix D-Filter ad Qty

Appendix E-Motor Performance Data

Appendix F-Typical Wiring Diagram

Safety Recommendations, Maintenance Contract and Training

Pre - Start Up Checklist

TRANE R

General Information

• Foreword

These installations, operation and

maintenance instructions are given as

a guide to good practice in the

installation, commission into service,

operation and periodic maintenance

by the user, of TRANE QuantumTM Air

Handler. They do not contain full

service procedures necessary for the

continued successful operation of this

equipment; the services of a qualified

technician should be employed

through the medium of a maintenance

contract with a reputable service

company.

• Warranty

Trane’s standard warranty covers the

equipment. It does not cover damage

due to misuse, lack of maintenance,

or failure to comply with the

manufacturer’s instructions or

recommendations.

• Unit Description

TRANE QuantumTM Air Handler are

Central Station Air Handlers designed

for a variety of controlled air application.

The basic unit consists of a fan,

heating and/or cooling coils, filters and

air dampers. See product catalogue for

list of available modules and options.

The TRANE QuantumTM Air Handler are

designed for cooling load conditions

of 1000-65000 nominal CFM. Fans are

double width, double inlet, centrifugal

types with forward curved, backward

curved, and airfoil blade designs.

To insure fan motor assembly stability

the unit ships with shipping brackets

located between the fan support frame.

These spacers must be removed prior

to fan operation, to assure proper

vibration isolation.

Units ship as complete units, sections

or subassemblies. Each section is

provided with a nameplate (label)

which includes type of section, unit

serial number, customer tag number

and unit model number.

TRANE R

CLCPXP

Model Nomenclature

TRANE R

CLCPEURO

Model Nomenclature

TRANE R

• Resolving Shipping

damage

If damage is found or items are

missing:

1. Report all claims of shipping

damage to the delivering carrier

(transporter) immediately, and

schedule an inspection.

2. Make specific notations concerning

the damage on the freight bill.

3. Keep damaged material in the same

location as received. It is the

receiver’s responsibility to provide

reasonable evidence that damage

was not incurred after delivery.

4. Photograph damage if possible.

5. Do not move or discard damaged

freight packaging materials.

6. Notify the Trane sales representative

of the damage and arrange for

repair. Do not attempt and arrange

for repair. Do not attempt to repair

the unit without consulting the sales

representative. TRANE IS NOT

RESPONSIBLE FOR SHIPPING

DAMAGE.

• Storage Considerations

When storing a TRANE QuantumTM Air

Handler, for a period of time before

installation, it must be protected. The

warranty will not cover damages to

the unit do to negligence during

storage. Indoor storage is ideal and

requires only a few special pre-

cautions.

To protect the unit from damage due to

the elements and prevent it from

possibly becoming a contaminant

source for indoor air quality (IAQ)

Receiving

problems, the unit should be stored

indoors.

When outdoor storage is necessary,

several things must be done to prevent

damage.

• Outdoor Storage

1. Select a well-drained area,

preferably a concrete pad or

blacktop surface.

2. Place the unit(s) on a dry surface or

raised off the ground to assure

adequate air circulation beneath unit

and to assure that no portion of the

unit contacts standing water at any

time.

3. Allow proper clearance around the

unit to perform periodic inspection

and maintenance of the equipment

while in storage.

4. Keep the equipment in the original

shipping container for protection

and ease of handling.

5. Cover the unit securely with a

CANVAS tarp.

6. Ensure that the canvas tarp is

secure.

7. Do not stack units.

8. Do not pile other material on the

units.

9. Loosen belt tension on drive belts.

• Nameplate

All of TRANE QuantumTM Air Handler

are identified by a multiple-character

model number. lts use enables owner/

operator, installing contractors, and

service technicians to define the

operation, components and options for

a particular unit. Be sure to refer to the

information printed on the unit

nameplate (figure1) when ordering

replacement or requesting service.

• Delivery Check

All unit sections are securely fasten to

skids for shipping and handling

purpose.

Upon receipt of the unit(s), inspect for

damage that may have occurred during

shipment and any items, which were

ordered but did not arrive with the unit.

Complete the following checks:

1. Visually inspect the exterior unit

casing and all accessories for any

dents, punctures or shipping and

handling damage.

2. Cut all banding (if applicable) loose

from skid, but do not remove the

skids.

3. Check all access doors to confirm

that they are secured with latches.

4. Manually rotate the fan wheel to

ensure free movement of the shaft

and bearings

Inspect the fan housing for any

foreign objects.

5. Inspect the coil(s) for fin damage.

Figure 1

TRANE R

Rigging and Handling

Confirm that factory installed (if any)

attachment brackets are in place and

screws tight, before rigging. The unit

will ship either assembled or as

sections. Before preparing the unit for

lifting, estimate the approximate center

of gravity for lifting safety. Because of

placement of internal components, the

unit weight may be unevenly

distributed, with more weight in the coil

and fan area. Approximate unit weights

are given in Appendix A & B.

Always apply good rigging procedures

when lifting a unit. Before hoisting the

unit into position, be sure that a proper

method of rigging is used, with straps

or slings and spreader bars for

protection and safety during lifting.

Always test-lift the unit to determine

exact unit balance and stability before

hoisting it to the installation location.

DO NOT LIFT THE UNIT WITHOUT

TEST-LIFT FOR BALANCE AND

RIGGING. DO NOT LIFT THE UNIT

ABOVE PERSONNEL. FAILURE TO

OBSERVE THESE WARNINGS MAY

RESULT IN PERSONAL INJURY,

DEATH OR EQUIPMENT DAMAGE.

(See Appendix A & B for components

weight).

NEVER ASSEMBLE OR BOLT

SECTIONS OR SUBASSEMBLIES

TOGETHER BEFORE RIGGING.

ALWAYS RIG SECTIONS OR

SUBASSEMBLIES AS RECEIVED

FROM THE FACTORY.

Off Loading

A specific lifting method for offloading

the units is recommended as follows

(See Figure 2):

1. 75mm-diameter lifting holes,or

certified lifting lugs, are provided on

the unit base frame.

2. ALL LIFTING POINTS in one axis of

the unit must be used when

offloading and moving the unit.

3. Slings and speader bars are to be

provided by the rigger and attached

to ALL LIFTING POINTS.

4. The minimum rated lifting capacity

(vertical) of each sling and spreader

bar should be no less than the

shipping weight.

5. The unit must be lifted with care,

avoiding shock load by lifting the unit

slowly and evenly.

WARNING

Moving To Position On Site

TRANE QuantumTM Air Handler are

supplied in sections modules, flat

packed, or as a complete unit, in

accordance with the relevant assembly

drawings. Any necessary use of force

during unloading or movement of the

units must only be applied via the unit

base frame or shipping pallet.

NEVER LIFT THE UNITS BY COIL

CONNECTIONS OR BY ANY OTHER

PROTRUSIONS.

THE ROOF IS NOT DESIGNED TO BE

WALKED ON, BUT IF THIS IS

UNAVOIDABLE, ENSURE A MORE

EVEN WEIGHT DISTRIBUTION BY

THE USE OF BOARDS.

FAILURE TO DO SO MAY RESULT IN

SEVERE PERSONAL INJURY OR

DEATH.

Figure 2

WARNING

ENSURE SLINGS DO NOT FOUL ON

UNIT PROTRUSIONS.

THE CENTRE OF GRAVITY WILL

VARY PER UNIT... POSITION THE

SLING AND SPREADER BARS

CAREFULLY TO COMPENSATE FOR

THIS.

TRANE R

Rigging and Handling

Forklift Trucks

The forks must only be applied under

the unit base frame and not against

the unit base frame. The lift point

should be as near as possible to the

centre of gravity (see Figures 3 and 4).

In the case of larger units the use of

several forklift trucks may be required.

Roller Movement

Units fitted with base frames may be

moved on roller trolley or tubular rollers

(see Figure 5).

Figure 3

Figure 4

Figure 5

This manual suits for next models

Table of contents

Other Trane Air Handler manuals

Trane

Trane 4TGB3F18A Assembly instructions

Trane

Trane 2/4TGB3F42A Assembly instructions

Trane

Trane CSAA Installation and operating instructions

Trane

Trane CLCF Climate Changer User manual

Trane

Trane 4TEE3D01B1000A Assembly instructions

Trane

Trane IntelliPak WEHE Series Installation and operating instructions

Trane

Trane 2TEE3F31A1000A Assembly instructions

Trane

Trane IntelliPak with Symbio 800 Operating instructions

Trane

Trane CCEB Owner's manual

Trane

Trane BAYBRFBX100A Assembly instructions

Trane

Trane 2TEE3C31A1000A Assembly instructions

Trane

Trane 4TEE3F31B1000B Assembly instructions

Trane

Trane UCCA Installation and operating instructions

Trane

Trane BAYAHEMIKIT001A User manual

Trane

Trane GAF2A0A36S3AEC Assembly instructions

Trane

Trane Oxbox J4HP4018A1 User manual

Trane

Trane TAM7A0A24H21SC Assembly instructions

Trane

Trane CDQ Operating and safety instructions

Trane

Trane 4YCC4024A1060A Assembly instructions

Trane

Trane Oxbox J4AH4E Series User manual

Trane

Trane TEM4 Series Assembly instructions

Trane

Trane GAM5 Series Assembly instructions

Trane

Trane 2TEE3F31A1000A Assembly instructions

Trane

Trane 2TEE3F39A1000A Assembly instructions

Popular Air Handler manuals by other brands

Klimor

Klimor EVO-S Operation and maintenance manual

Salda

Salda SMARTY XP MOUNTING AND INSTALLATION INSTRUCTION

BLAUBERG

BLAUBERG KOMFORT Roto EC S400 user manual

Trenton

Trenton TPLP Series installation instructions

Kemper

Kemper CleanAirTower operating manual

Daikin

Daikin DV PTC 14 Series installation instructions

Haier

Haier HB2400VA1M20 Installation & operation manual

Webasto

Webasto BlueCool A-Series operating instructions

RDZ

RDZ DA 701 Technical installation manual

Carrier

Carrier 39T Installation, Start-Up and Service Instructions

Armstrong Air

Armstrong Air BCE5V Series installation instructions

ActronAir

ActronAir CAY500T Installation and commissioning guide

Carrier

Carrier 40MBDAQ Service manual

Allied

Allied A93UH1E Service manual

Nortek

Nortek B6VMAI installation instructions

TemperZone

TemperZone Econex Pro OPA 1410RLTM4FPQD Installation & maintenance

RDZ

RDZ WHR 200 Technical installation manual

AAON

AAON H3 Series Installation operation & maintenance