Trane 5 Series Service manual

GAM5-SF-1P-EN

HAZARDOUS VOLTAGE - DISCONNECT POWER BEFORE SERVICING

WARNING:

Service Facts

*For use with BAYEA series heaters ONLY

Convertible Air Handlers

Models:Series 5 Air Handlers 1-1/2 to 5 Ton

Black Epoxy Coil

GAM5B0A18M11EA

GAM5B0A24M21EA

GAM5B0B30M21EA

GAM5B0B36M31EA

GAM5B0C42M31EA

GAM5B0C48M41EA

GAM5B0C60M51EA

Standard Coil

GAM5B0A18M11SB

GAM5B0A24M21SB

GAM5B0B30M21SB

GAM5B0B36M31SB

GAM5B0C42M31SB

GAM5B0C48M41SB

GAM5B0C60M51SB

WARNING

SAFETY HAZARD! This information is intended for

use by individuals possessing adequate backgrounds

of electrical and mechanical experience. Any attempt to

repair a central air conditioning product may result in

personal injury and/or property damage. The manufac-

ture or seller cannot be responsible for the interpreta-

tion of this information, nor can it assume any liability

in connection with its use.

PRESSURIZED REFRIGERANT! SYSTEM CON-

TAINS OIL AND REFRIGERANT UNDER HIGH PRES-

SURE. RECOVER REFRIGERANT TO RELIEVE PRES-

SURE BEFORE OPENING THE SYSTEM.

DO NOT USE NON-APPROVED REFRIGERANTS OR

REFRIGERANT SUBSTITUTES OR REFRIGERANT AD-

DITIVES.

WARNING

LIVE ELECTRICAL COMPONENTS! During in-

stallation, testing, servicing, and troubleshooting of this

product, it may be necessary to work with live electrical

components. Failure to follow all electrical safety pre-

cautions when exposed to live electrical components

could result in death or serious injury.

WARNING

Note: This unit is certified to UL 1995.

The interior cabinet wall meets the following:

- UL94-5VA Flame Class Listed

- UL723 Steiner Tunnel Listed for 25/50 Flame/

Smoke

- UL746C Listed for Exposure to Ultraviolet Light,

Water Exposure and Immersion

Table of Contents

Product Specifications ....................................................................................................................................2

Airflow Performance........................................................................................................................................3

Heater Attribute Data.....................................................................................................................................10

Wiring Diagram..............................................................................................................................................14

Sequence of Operation..................................................................................................................................15

SubcoolingAdjustment....................................................................................................................................16

Troubleshooting.............................................................................................................................................19

IMPORTANT --- This document contains a wiring diagram and service information. This is customer property and is to remain with this

unit. Please return to service information pack upon completion of work.

Important: Panel damage can occur with prolonged

exposure to POE lubricants. Air handler front panels

that come in contact with POE oil must be washed

immediately with soapy water.

WARNING

This product can expose you to chemicals including

lead, which are known to the State of California to case

cancer and birth defects or other reproductive harm.

For more information go to www. P65Warnings.ca.gov

GAM5-SF-1P-EN 2

PRODUCT SPECIFICATIONS

MODEL

RATED VOLTS/PH/HZ.

RATINGS ①

INDOOR COIL — Type

Rows — F.P.I.

Face Area (sq. ft.)

Tube Size (in.)

Refrigerant Control

Drain Conn. Size (in.) ②

DUCT CONNECTIONS

INDOOR FAN — Type

Diameter-Width (In.)

No. Used

Drive - No. Speeds

CFM vs. in. w.g.

No. Motors — H.P.

Motor Speed RPM

Volts/Ph/Hz

F.L. Amps

FILTER

Filter Furnished?

Type Recommended

No.-Size-Thickness

REFRIGERANT

Ref. Line Connections

Coupling or Conn. Size — in. Gas

Coupling or Conn. Size — in. Liq.

DIMENSIONS

Crated (In.)

Uncrated

WEIGHT

Shipping (Lbs.) / Net (Lbs.)

①These Air Handlers are A.R.I. certified with various Split System Air Conditioners and Heat Pumps (ARI

STANDARD 210/240). Refer to the Split System Outdoor Unit Product Data Guides for performance data.

PRODUCT SPECIFICATIONS

MODEL

RATED VOLTS/PH/HZ.

RATINGS ①

INDOOR COIL — Type

Rows — F.P.I.

Face Area (sq. ft.)

Tube Size (in.)

Refrigerant Control

Drain Conn. Size (in.) ②

DUCT CONNECTIONS

INDOOR FAN — Type

Diameter-Width (In.)

No. Used

Drive - No. Speeds

CFM vs. in. w.g.

No. Motors — H.P.

Motor Speed RPM

Volts/Ph/Hz

F.L. Amps

FILTER

Filter Furnished?

Type Recommended

No.-Size-Thickness

REFRIGERANT

Ref. Line Connections

Coupling or Conn. Size — in. Gas

Coupling or Conn. Size — in. Liq.

DIMENSIONS

Crated (In.)

Uncrated

WEIGHT

Shipping (Lbs.) / Net (Lbs.)

GAM5B0C60M51SB

GAM5B0C60M51EA

208-230/1/60

See O.D. Specifications

Plate Fin

4 - 14

5.96

3/8

TXV

3/4 NPT

See Outline Drawing

Centrifugal

11 X 10

Direct - 5

See Fan Performance Table

1 - 1

1050

208-230/1/60

7.6

Throwaway

1 - 22 X 20 - 1 in.

R-410A

Brazed

7/8

3/8

H x W x D

63-1/4 x 27-1/2 x 25-3/4

61-3/4 x 23-1/2 x 21-3/4

180/170

GAM5B0A18M11SB

GAM5B0A18M11EA

208-230/1/60

See O.D. Specifications

Plate Fin

3 - 14

3.67

3/8

TXV

3/4 NPT

See Outline Drawing

Centrifugal

11 X 8

Direct - 5

See Fan Performance Table

1 - 1/3

1050

208-230/1/60

2.8

Throwaway

1 - 16 X 20 - 1 in.

R-410A

Brazed

3/4

3/8

H x W x D

51-3/8 x 20-1/2 x 25-3/4

49-7/8 x 17-1/2 x 21-3/4

126/120

GAM5B0A24M21SB

GAM5B0A24M21EA

208-230/1/60

See O.D. Specifications

Plate Fin

3 - 14

3.67

3/8

TXV

3/4 NPT

See Outline Drawing

Centrifugal

11 X 8

Direct - 5

See Fan Performance Table

1 - 1/3

1050

208-230/1/60

2.8

Throwaway

1 - 16 X 20 - 1 in.

R-410A

Brazed

3/4

3/8

H x W x D

51-3/8 x 20-1/2 x 25-3/4

49-7/8 x 17-1/2 x 21-3/4

126/120

GAM5B0B30M21SB

GAM5B0B30M21EA

208-230/1/60

See O.D. Specifications

Plate Fin

3 - 14

4.13

3/8

TXV

3/4 NPT

See Outline Drawing

Centrifugal

11 X 10

Direct - 5

See Fan Performance Table

1 - 1/3

1050

208-230/1/60

2.8

Throwaway

1 - 20 X 20 - 1 in.

R-410A

Brazed

3/4

3/8

H x W x D

53 x 24-1/4 x 25-3/4

51-1/2 x 21-1/4 x 21-3/4

140/132

GAM5B0B36M31SB

GAM5B0B36M31EA

208-230/1/60

See O.D. Specifications

Plate Fin

3 - 14

5.04

3/8

TXV

3/4 NPT

See Outline Drawing

Centrifugal

11 X 10

Direct - 5

See Fan Performance Table

1 - 1/2

1050

208-230/1/60

4.1

Throwaway

1 - 20 X 20 - 1 in.

R-410A

Brazed

7/8

3/8

H x W x D

57-1/4 x 24-1/4 x 25-3/4

55-3/4 x 21-1/4 x 21-3/4

150/142

GAM5B0C42M31SB

GAM5B0C42M31EA

208-230/1/60

See O.D. Specifications

Plate Fin

4 - 14

5.04

3/8

TXV

3/4 NPT

See Outline Drawing

Centrifugal

11 X 10

Direct - 5

See Fan Performance Table

1 - 1/2

1050

208-230/1/60

4.1

Throwaway

1 - 22 X 20 - 1 in.

R-410A

Brazed

7/8

3/8

H x W x D

58-1/2 x 27-1/2 x 25-3/4

56-7/8 x 23-1/2 x 21-3/4

163/153

GAM5B0C48M41SB

GAM5B0C48M41EA

208-230/1/60

See O.D. Specifications

Plate Fin

4 - 14

5.96

3/8

TXV

3/4 NPT

See Outline Drawing

Centrifugal

11 X 10

Direct - 5

See Fan Performance Table

1 - 3/4

1050

208-230/1/60

6.0

Throwaway

1 - 22 X 20 - 1 in.

R-410A

Brazed

7/8

3/8

H x W x D

63-1/4 x 27-1/2 x 25-3/4

61-3/4 x 23-1/2 x 21-3/4

176/166

②3/4" Male Plastic Pipe (Ref.: ASTM 1785-76)

3 GAM5-SF-1P-EN

Note: Heating and cooling speeds are the same, factory

set at Speed Tap #4.

Note: A “G” only signal from the comfort control will run

the blower at a lower speed, factory set at Speed Tap #1.

See the Sequence of Operation for additional information.

Note: Speed Tap 1 is NOT used for two stage systems.

Two stage systems will require an airflow adjustment.

AIRFLOW PERFORMANCE

GAM5B0A18M11SB, GAM5B0A18M11EA

EXTERNAL STATIC

(in w.g) AIRFLOW (CFM)

Speed Taps - 230 VOLTS Speed Taps - 208 VOLTS

5 4 † 3 2 1 5 4 † 3 2 1

0 1081 977 930 862 556 1078 974 927 858 553

0.1 1044 922 850 806 379 1038 916 844 800 373

0.2 995 880 787 702 202 987 871 778 693 193

0.3 956 830 738 621 - 944 819 727 610 -

0.4 914 788 692 562 - 900 774 677 548 -

0.5 872 749 646 502 - 855 732 629 485 -

0.6 838 707 590 445 - 819 687 570 425 -

0.7 802 650 528 389 - 779 628 505 367 -

0.8 755 598 478 327 - 730 573 453 302 -

0.9 708 539 420 - - 680 512 392 - -

NOTES:

1. Values are with wet coil and without filters.

2. Contact your particular filter manufacturer for pressure drop data.

3. Electric heater pressure drop is negligible and is included within the airflow data.

4. Tap 1 is an continuous fan speed tap for single stage systems. Airflow adjustment is required for 2 stage systems.

See Airflow adjustment section.

5. † Factory Setting

GAM5B0A18M11SB, GAM5B0A18M11EA MINIMUM HEATER AIRFLOW CFM

Heater Minimum Air Speed Tap

Without Heat Pump With Heat Pump

BAYEAAC04BK1

BAYEAAC04LG1 Tap 3 Tap 4

BAYEAAC05BK1

BAYEAAC05LG1 Tap 3 Tap 4

BAYEAAC08BK1

BAYEAAC08LG1 Tap 3 Tap 4

BAYEAAC10BK1

BAYEAAC10LG1 Tap 3 ①Tap 5 ①

BAYEAAC10LG3 Tap 5 Tap 5 ②

BAYEABC15BK1 - -

BAYEABC20BK1 - -

① Heater not qualified for downflow installations

② Approved for 240 V only

GAM5-SF-1P-EN 4

AIRFLOW PERFORMANCE

GAM5B0A24M21SB, GAM5B0A24M21EA

EXTERNAL STATIC

(in w.g) AIRFLOW (CFM)

Speed Taps - 230 VOLTS Speed Taps - 208 VOLTS

5 4 † 3 2 1 5 4 † 3 2 1

0 1081 977 937 928 579 1078 974 933 925 576

0.1 1044 922 868 844 418 1038 916 863 838 412

0.2 995 880 817 777 306 987 871 808 768 298

0.3 956 830 767 729 - 944 819 756 717 -

0.4 914 788 719 682 - 900 774 705 668 -

0.5 872 749 680 635 - 855 732 663 618 -

0.6 838 707 628 577 - 819 687 609 557 -

0.7 802 650 566 515 - 779 628 544 492 -

0.8 755 598 511 467 - 730 573 486 442 -

0.9 708 539 460 407 - 680 512 432 - -

NOTES:

1. Values are with wet coil and without filters.

2. Contact your particular filter manufacturer for pressure drop data.

3. Electric heater pressure drop is negligible and is included within the airflow data.

4. Tap 1 is an continuous fan speed tap for single stage systems. Airflow adjustment is required for 2 stage systems.

See Airflow adjustment section.

5. † Factory Setting

Note: Heating and cooling speeds are the same, factory

set at Speed Tap #4.

Note: A “G” only signal from the comfort control will run the

blower at a lower speed, factory set at Speed Tap #1. See

the Sequence of Operation for additional information.

Note: Speed Tap 1 is NOT used for two stage systems.

Two stage systems will require an airflow adjustment.

GAM5B0A24M21SB, GAM5B0A24M21EA MINIMUM HEATER AIRFLOW CFM

Heater Minimum Air Speed Tap

Without HP With HP

BAYEAAC04BK1

BAYEAAC04LG1 Tap 3 Tap 4

BAYEAAC05BK1

BAYEAAC05LG1 Tap 3 Tap 4

BAYEAAC08BK1

BAYEAAC08LG1 Tap 3 Tap 4

BAYEAAC10BK1

BAYEAAC10LG1 Tap 3 ①Tap 5 ①

BAYEAAC10LG3 Tap 5 Tap 5 ②

BAYEABC15BK1 - -

BAYEABC20BK1 - -

① Heater not qualified for downflow installations

② Approved for 240 V only

5 GAM5-SF-1P-EN

AIRFLOW PERFORMANCE

GAM5B0B30M21SB, GAM5B0B30M21EA

EXTERNAL STATIC

(in w.g) AIRFLOW (CFM)

Speed Taps - 230 VOLTS Speed Taps - 208 VOLTS

5 4 † 3 2 1 5 4 † 3 2 1

0 1282 1150 979 856 678 1279 1146 976 853 675

0.1 1238 1094 931 797 482 1232 1088 925 791 476

0.2 1186 1047 863 725 285 1177 1039 854 716 276

0.3 1141 986 803 647 88 1130 975 791 636 77

0.4 1091 935 721 555 - 1076 921 707 540 -

0.5 1033 866 649 461 - 1016 849 632 444 -

0.6 977 799 554 388 - 958 779 534 369 -

0.7 914 732 490 318 - 892 710 468 296 -

0.8 846 646 429 - - 821 621 404 - -

0.9 771 587 376 - - 743 560 348 - -

NOTES:

1. Values are with wet coil and without filters.

2. Contact your particular filter manufacturer for pressure drop data.

3. Electric heater pressure drop is negligible and is included within the airflow data.

4. Tap 1 is an continuous fan speed tap for single stage systems. Airflow adjustment is required for 2 stage systems.

See Airflow adjustment section.

5. † Factory Setting

Note: Heating and cooling speeds are the same, factory

set at Speed Tap #4.

Note: A “G” only signal from the comfort control will run

the blower at a lower speed, factory set at Speed Tap #1.

See the Sequence of Operation for additional information.

Note: Speed Tap 1 is NOT used for two stage systems.

Two stage systems will require an airflow adjustment.

GAM5B0B30M21SB, GAM5B0B30M21EA MINIMUM HEATER AIRFLOW CFM

Heater Minimum Air Speed Tap

Without HP With HP

BAYEAAC04BK1

BAYEAAC04LG1 Tap 2 Tap 3

BAYEAAC05BK1

BAYEAAC05LG1 Tap 2 Tap 3

BAYEAAC08BK1

BAYEAAC08LG1 Tap 3 Tap 4

BAYEAAC10BK1

BAYEAAC10LG1 Tap 3 Tap 4

BAYEAAC10LG3 Tap 3 ①Tap 4 ①

BAYEABC15BK1 Tap 4 Tap 5

BAYEABC15LG3 Tap 4 Tap 5

BAYEABC20BK1 - -

BAYEACC25BK1 - -

① 208 V not approved for upflow installations

GAM5-SF-1P-EN 6

Note: Heating and cooling speeds are the same, factory

set at Speed Tap #4.

Note: A “G” only signal from the comfort control will run

the blower at a lower speed, factory set at Speed Tap #1.

See the Sequence of Operation for additional information.

Note: Speed Tap 1 is NOT used for two stage systems.

Two stage systems will require an airflow adjustment.

AIRFLOW PERFORMANCE

GAM5B0B36M31SB, GAM5B0B36M31EA

EXTERNAL STATIC

(in w.g) AIRFLOW (CFM)

Speed Taps - 230 VOLTS Speed Taps - 208 VOLTS

5 4 † 3 2 1 5 4 † 3 2 1

0 1438 1387 1197 1013 732 1435 1383 1194 1009 729

0.1 1394 1340 1143 945 552 1388 1334 1137 939 546

0.2 1350 1299 1090 892 413 1341 1291 1082 884 404

0.3 1301 1245 1031 817 305 1289 1233 1019 806 293

0.4 1253 1197 975 751 209 1239 1183 960 737 195

0.5 1205 1151 917 651 - 1188 1134 900 634 -

0.6 1155 1094 837 578 - 1136 1075 817 559 -

0.7 1099 1032 766 499 - 1077 1010 744 476 -

0.8 1039 972 691 453 - 1014 946 666 - -

0.9 964 889 633 409 - 936 861 605 - -

NOTES:

1. Values are with wet coil and without filters.

2. Contact your particular filter manufacturer for pressure drop data.

3. Electric heater pressure drop is negligible and is included within the airflow data.

4. Tap 1 is an continuous fan speed tap for single stage systems. Airflow adjustment is required for 2 stage systems.

See Airflow adjustment section.

5. † Factory Setting

GAM5B0B36M31SB, GAM5B0B36M31EA MINIMUM HEATER AIRFLOW CFM

Heater Minimum Air Speed Tap

Without HP With HP

BAYEAAC04BK1

BAYEAAC04LG1 Tap 2 Tap 3

BAYEAAC05BK1

BAYEAAC05LG1 Tap 2 Tap 3

BAYEAAC08BK1

BAYEAAC08LG1 Tap 3 Tap 4

BAYEAAC10BK1

BAYEAAC10LG1 Tap 4 Tap 5

BAYEAAC10LG3 Tap 4 Tap 5

BAYEABC15BK1 Tap 4 Tap 5

BAYEABC15LG3 Tap 4 Tap 5

BAYEABC20BK1 - -

BAYEACC25BK1 - -

7 GAM5-SF-1P-EN

Note: Heating and cooling speeds are the same, factory

set at Speed Tap #4.

Note: A “G” only signal from the comfort control will run

the blower at a lower speed, factory set at Speed Tap #1.

See the Sequence of Operation for additional information.

Note: Speed Tap 1 is NOT used for two stage systems.

Two stage systems will require an airflow adjustment.

AIRFLOW PERFORMANCE

GAM5B0C42M31SB, GAM5B0C42M31EA

EXTERNAL STATIC

(in w.g) AIRFLOW (CFM)

Speed Taps - 230 VOLTS Speed Taps - 208 VOLTS

5 4 † 3 2 1 5 4 † 3 2 1

0 1644 1575 1401 1266 752 1641 1572 1398 1263 749

0.1 1596 1525 1346 1215 665 1590 1519 1340 1209 659

0.2 1550 1480 1300 1157 569 1542 1471 1291 1148 560

0.3 1509 1437 1252 1110 492 1497 1425 1241 1099 480

0.4 1463 1391 1205 1058 384 1449 1377 1191 1043 370

0.5 1420 1345 1151 980 327 1403 1328 1134 963 310

0.6 1376 1301 1085 917 259 1356 1282 1066 898 239

0.7 1332 1251 1020 865 - 1310 1228 998 842 -

0.8 1271 1179 969 813 - 1246 1154 944 788 -

0.9 1199 1119 924 747 - 1171 1091 897 719 -

NOTES:

1. Values are with wet coil and without filters.

2. Contact your particular filter manufacturer for pressure drop data.

3. Electric heater pressure drop is negligible and is included within the airflow data.

4. Tap 1 is an continuous fan speed tap for single stage systems. Airflow adjustment is required for 2 stage systems.

See Airflow adjustment section.

5. † Factory Setting

GAM5B0C42M31SB, GAM5B0C42M31EA MINIMUM HEATER AIRFLOW CFM

Heater Minimum Air Speed Tap

Without HP With HP

BAYEAAC04BK1

BAYEAAC04LG1 Tap 2 Tap 3

BAYEAAC05BK1

BAYEAAC05LG1 Tap 2 Tap 3

BAYEAAC08BK1

BAYEAAC08LG1 Tap 2 Tap 3

BAYEAAC10BK1

BAYEAAC10LG1 Tap 2 Tap 3

BAYEAAC10LG3 Tap 2 Tap 3

BAYEABC15BK1 Tap 3 Tap 4

BAYEABC15LG3 Tap 3 Tap 4

BAYEABC20BK1 - -

BAYEACC25BK1 - -

GAM5-SF-1P-EN 8

Note: Heating and cooling speeds are the same, factory

set at Speed Tap #4.

Note: A “G” only signal from the comfort control will run

the blower at a lower speed, factory set at Speed Tap #1.

See the Sequence of Operation for additional information.

Note: Speed Tap 1 is NOT used for two stage systems.

Two stage systems will require an airflow adjustment.

AIRFLOW PERFORMANCE

GAM5B0C48M41SB, GAM5B0C48M41EA

EXTERNAL STATIC

(in w.g) AIRFLOW (CFM)

Speed Taps - 230 VOLTS Speed Taps - 208 VOLTS

5 4 † 3 2 1 5 4 † 3 2 1

0 1913 1770 1694 1593 866 1910 1767 1691 1590 863

0.1 1874 1730 1653 1547 791 1868 1724 1647 1541 785

0.2 1834 1690 1611 1505 699 1825 1681 1602 1496 690

0.3 1791 1646 1567 1456 620 1780 1635 1556 1445 609

0.4 1748 1600 1521 1410 537 1734 1586 1506 1396 522

0.5 1708 1556 1476 1367 453 1691 1539 1459 1350 437

0.6 1668 1516 1436 1326 370 1648 1496 1416 1306 351

0.7 1629 1475 1394 1283 - 1607 1452 1372 1260 -

0.8 1588 1435 1352 1236 - 1563 1410 1327 1211 -

0.9 1541 1390 1304 1183 - 1513 1362 1276 1156 -

NOTES:

1. Values are with wet coil and without filters.

2. Contact your particular filter manufacturer for pressure drop data.

3. Electric heater pressure drop is negligible and is included within the airflow data.

4. Tap 1 is an continuous fan speed tap for single stage systems. Airflow adjustment is required for 2 stage systems.

See Airflow adjustment section.

5. † Factory Setting

GAM5B0C48M41SB, GAM5B0C48M41EA MINIMUM HEATER AIRFLOW CFM

Heater Minimum Air Speed Tap

Without HP With HP

BAYEAAC04BK1

BAYEAAC04LG1 Tap 2 Tap 3

BAYEAAC05BK1

BAYEAAC05LG1 Tap 2 Tap 3

BAYEAAC08BK1

BAYEAAC08LG1 Tap 2 Tap 3

BAYEAAC10BK1

BAYEAAC10LG1 Tap 2 Tap 3

BAYEAAC10LG3 Tap 2 Tap 3

BAYEABC15BK1 Tap 3 Tap 4

BAYEABC15LG3 Tap 3 Tap 4

BAYEABC20BK1 Tap 3 Tap 4

BAYEACC25BK1 Tap 4 Tap 5

9 GAM5-SF-1P-EN

Note: Heating and cooling speeds are the same, factory set at Speed Tap #4.

Note: A “G” only signal from the comfort control will run the blower at a lower speed, factory

set at Speed Tap #1. See the Sequence of Operation for additional information.

Note: Speed Tap 1 is NOT used for two stage systems. Two stage systems will require an

airflow adjustment.

AIRFLOW PERFORMANCE

GAM5B0C60M51SB, GAM5B0C60M51EA

EXTERNAL STATIC

(in w.g) AIRFLOW (CFM)

Speed Taps - 230 VOLTS Speed Taps - 208 VOLTS

5 4 † 3 2 1 5 4 † 3 2 1

0 2327 2020 1914 1819 1125 2324 2017 1910 1816 1122

0.1 2285 1980 1873 1780 990 2279 1974 1867 1774 984

0.2 2237 1944 1835 1740 831 2228 1935 1826 1731 822

0.3 2182 1908 1800 1705 600 2171 1896 1789 1693 589

0.4 2125 1869 1756 1659 331 2111 1854 1742 1645 317

0.5 2062 1830 1717 1620 249 2045 1813 1700 1603 232

0.6 1995 1747 1664 1575 187 1975 1727 1644 1555 168

0.7 1922 1707 1629 1540 - 1899 1685 1607 1518 -

0.8 1844 1673 1594 1502 - 1819 1648 1569 1477 -

0.9 1761 1629 1553 1464 - 1733 1601 1525 1436 -

NOTES:

1. Values are with wet coil and without filters.

2. Contact your particular filter manufacturer for pressure drop data.

3. Electric heater pressure drop is negligible and is included within the airflow data.

4. Tap 1 is an continuous fan speed tap for single stage systems. Airflow adjustment is required for 2 stage systems.

See Airflow adjustment section.

5. If the air handler is applied in downflow or horizontal configurations, the airflow should not exceed 2000 CFM.

Airflow above 2000 CFM could result in water blow-off.

6. † Factory Setting

GAM5B0C60M51SB, GAM5B0C60M51EA MINIMUM HEATER AIRFLOW CFM

Heater Minimum Air Speed Tap

Without HP With HP

BAYEAAC04BK1

BAYEAAC04LG1 Tap 2 Tap 3

BAYEAAC05BK1

BAYEAAC05LG1 Tap 2 Tap 3

BAYEAAC08BK1

BAYEAAC08LG1 Tap 2 Tap 3

BAYEAAC10BK1

BAYEAAC10LG1 Tap 2 Tap 3

BAYEAAC10LG3 Tap 2 Tap 3

BAYEABC15BK1 Tap 3 Tap 4

BAYEABC15LG3 Tap 3 Tap 4

BAYEABC20BK1 Tap 3 Tap 4

BAYEACC25BK1 Tap 4 Tap 5 ①②

①If the air handler is applied in downflow or horizontal configurations, the airflow should

not exceed 2000 CFM. Airflow above 2000 CFM could result in water blow-off.

② Tap 5 can be used but only when the external static pressure is .6" or above.

GAM5-SF-1P-EN 10

WIRING DATA

GAM5B0A18M11SB, GAM5B0A18M11EA

Heater

Model

No.

Circuits

240 VOLT 208 VOLT

Capacity Heater

Amps

per

Circuit

Minimum

Circuit

Ampacity

Maximum

Overload

Protection

Capacity Heater

Amps

per

Circuit

Minimum

Circuit

Ampacity

Maximum

Overload

Protection

kW BTUH kW BTUH

No Heater - - - 2.8* 4 15 - - 2.8* 4 15

BAYEAAC04BK1

BAYEAAC04LG1 1 3.84 13100 16.0 24 25 2.88 9800 13.8 21 25

BAYEAAC05BK1

BAYEAAC05LG1 1 4.80 16400 20.0 29 30 3.60 12300 17.3 25 25

BAYEAAC08BK1

BAYEAAC08LG1 1 7.68 26200 32.0 44 45 5.76 19700 27.7 38 40

BAYEAAC10BK1①

BAYEAAC10LG1① 1 9.60 32800 40.0 54 60 7.20 24600 34.6 47 50

BAYEAAC10LG3② 1-3 PH 9.60 32800 23.1 32 35 7.20 24600 20.0 28 30

Note: * Motor Amps

① Heater not qualified for downflow installations

② Approved for 240 V only with Heat Pump

WIRING DATA

GAM5B0A24M21SB, GAM5B0A24M21EA

Heater

Model

No.

Circuits

240 VOLT 208 VOLT

Capacity Heater

Amps

per

Circuit

Minimum

Circuit

Ampacity

Maximum

Overload

Protection

Capacity Heater

Amps

per

Circuit

Minimum

Circuit

Ampacity

Maximum

Overload

Protection

kW BTUH kW BTUH

No Heater - - - 2.8* 4 15 - - 2.8* 4 15

BAYEAAC04BK1

BAYEAAC04LG1 1 3.84 13100 16.0 24 25 2.88 9800 13.8 21 25

BAYEAAC05BK1

BAYEAAC05LG1 1 4.80 16400 20.0 29 30 3.60 12300 17.3 25 25

BAYEAAC08BK1

BAYEAAC08LG1 1 7.68 26200 32.0 44 45 5.76 19700 27.7 38 40

BAYEAAC10BK1①

BAYEAAC10LG1① 1 9.60 32800 40.0 54 60 7.20 24600 34.6 47 50

BAYEAAC10LG3② 1-3 PH 9.60 32800 23.1 32 35 7.20 24600 20.0 28 30

Note: * Motor Amps

① Heater not qualified for downflow installations

② Approved for 240 V only with Heat Pump

This manual suits for next models

Table of contents

Other Trane Air Handler manuals

Trane

Trane TWE031E13FB1 Assembly instructions

Trane

Trane RRU120 D B Series Installation and operating instructions

Trane

Trane Oxbox J4HP4018A1 User manual

Trane

Trane 2/4TEC3F18B1000A Assembly instructions

Trane

Trane Performance Climate Changer CSAA Series Installation and operating instructions

Trane

Trane 5TXCA001AS3HCA Assembly instructions

Trane

Trane CSAA User manual

Trane

Trane 4TEE3C01A1000A Assembly instructions

Trane

Trane 4TWL9048A1000A Service manual

Trane

Trane 2/4TGB3F42A Assembly instructions

Trane

Trane 7 Series Installation and operating instructions

Trane

Trane GAF2A0A36S3AEC Assembly instructions

Trane

Trane GAF2A0A36S31EE Assembly instructions

Trane

Trane AM7A0C36H31SA Series Service manual

Trane

Trane 4YCC4024E1060A User manual

Trane

Trane TAM4A0A18S11ED Assembly instructions

Trane

Trane Variable Speed ComfortLink II Assembly instructions

Trane

Trane BMTX BCU User manual

Trane

Trane TAMXA0A24V21DA Assembly instructions

Trane

Trane CLCF Climate Changer User manual

Trane

Trane 4TEE3F48A1000A Assembly instructions

Trane

Trane Climate Changer M Series Owner's manual

Trane

Trane CFAS Quick start guide

Trane

Trane Performance Climate Changer PSCA Installation and operating instructions

Popular Air Handler manuals by other brands

Klimor

Klimor EVO-S Operation and maintenance manual

Salda

Salda SMARTY XP MOUNTING AND INSTALLATION INSTRUCTION

BLAUBERG

BLAUBERG KOMFORT Roto EC S400 user manual

Trenton

Trenton TPLP Series installation instructions

Kemper

Kemper CleanAirTower operating manual

Daikin

Daikin DV PTC 14 Series installation instructions

Haier

Haier HB2400VA1M20 Installation & operation manual

Webasto

Webasto BlueCool A-Series operating instructions

RDZ

RDZ DA 701 Technical installation manual

Carrier

Carrier 39T Installation, Start-Up and Service Instructions

Armstrong Air

Armstrong Air BCE5V Series installation instructions

ActronAir

ActronAir CAY500T Installation and commissioning guide

Carrier

Carrier 40MBDAQ Service manual

Allied

Allied A93UH1E Service manual

Nortek

Nortek B6VMAI installation instructions

TemperZone

TemperZone Econex Pro OPA 1410RLTM4FPQD Installation & maintenance

RDZ

RDZ WHR 200 Technical installation manual

AAON

AAON H3 Series Installation operation & maintenance