TrackWeight I Series User manual

INSTALLATION MANUAL

SCALES FOR TRUCKS

BRT4 &BRT5

SERIES I

V1.0.0

Installation Manual | V1.0.0 | 3

Table of Contents

TABLE OF CONTENTS...............................................................................................................................3

INTRODUCTION........................................................................................................................................4

MAIN CONFIGURATIONS ..........................................................................................................................5

SEMI-TRAILER................................................................................................................................................ 5

6–10-WHEEL TRUCK.................................................................................................................................... 6

12-WHEEL TRUCK .......................................................................................................................................... 7

INSTALLATION OF THE MONITOR AND COMMUNICATION BOX................................................................8

COMPONENTS................................................................................................................................................ 8

INSTALLATION ................................................................................................................................................ 9

INSTALLATION OF AIR SENSOR ON TRAILER OR 6 - 10 - 12-WHEEL TRUCKS .......................................11

COMPONENTS..............................................................................................................................................11

ADDITIONAL COMPONENTS (TRACTOR-TRAILER).................................................................................................12

INSTALLATION ON TRACTOR-TRAILER CONFIGURATION ........................................................................................13

Tractor end..........................................................................................................................................13

Trailer end ...........................................................................................................................................15

INSTALLATION ON 6-10 -12-WHEEL TRUCK CONFIGURATION............................................................................16

INSTALLING A MECHANICAL RT SENSOR ..............................................................................................17

COMPONENTS..............................................................................................................................................17

INSTALLATION ..............................................................................................................................................18

APPENDIX 1-MATCHING OF RT SENSOR SIGNALS ............................................................................................25

APPENDIX 2-RUSTPROOF WELD PROCEDURES ..............................................................................................26

INSTALLATION OF OPTIONAL ACCESSORIES..........................................................................................27

EXTERIOR LIGHTS/ALARMS (BRT 620-M, BRT 622) .....................................................................................27

IMPRIMANTE (BRT 504) ..............................................................................................................................28

CONTACT US ..........................................................................................................................................29

UPDATE NOTES......................................................................................................................................30

Installation Manual | V1.0.0 | 4

Introduction

Thank you for purchasing a high-precision electronic scale from TrackWeight. Based on more

than 20 years of expertise, research and development, your weighing system will provide you

with years of service and precision, under the most difficult road or construction conditions.

The durability and performance of your BRT system is closely linked to a quality installation

and precise calibration. To do this, your authorized reseller will be able to adjust your

TrackWeight scale according to your needs. If you do the installation yourself, no problem.

Consult this installation manual to guide you step by step. Then flip through your user

manual as it contains all the information you need to set up, calibrate and use your scale.

RMT Equipment is the exclusive distributor of TrackWeight products in Quebec, and

distributes a wide range of weighing systems and reversing cameras. For technical

assistance during installation, please contact the Service department at 1-877-663-4311 or

visit the www.rmtequip.com website.

Once again, congratulations and happy driving with your TrackWeight system!

Installation Manual | V1.0.0 | 5

Main configurations

Semi-trailer

Installation Manual | V1.0.0 | 6

6 –10-wheel truck

Installation Manual | V1.0.0 | 7

12-wheel truck

* If it is a lift axle, it is possible to replace the mechanical sensor with an air sensor

depending on the type of suspension.

Installation Manual | V1.0.0 | 8

Installation of the monitor and communication

box

Components

No.

Quantity

Part Number

Component

BRT 6299 (or BRT 6298)

BRT 5 Monitor (or BRT 4)

BRT 5300

Communication Box

BRT 5137

Power cable

BRT 5136 (or BRT 5138)

BRT 5 monitor cable (or BRT 4

Monitor cable)

Installation Manual | V1.0.0 | 9

Installation

1. Identify a location with enough space to accommodate the BRT 4/5 monitor.

Note: It is possible to install the monitor in the dashboard or on the top of the

dashboard with the stand.

2. The communication box is located inside the dashboard. You must select a location to

protect it with enough space to allow the installation of sensors and cabling.

CAUTION: Avoid installing the communication box near an extreme heat source.

Ideally, it should also be installed far from the radio antenna.

3. Secure the communication box inside the dashboard so that it does not move.

Installation Manual | V1.0.0 | 10

4. The communication box operates on a current of 12-24 VDC. Connect the power cable

(BRT 5137) to the fuse board. The red wire must be connected to a stable source with

a free fuse (minimum 5A). The black wire must be added to the board's common

neutral (or other neutral) for the scale monitor only. The other end of the cable should

be lead to the communication box in the "Power 12-24 VDC" indicated connector.

5. Connect the cable (BRT 5136) to the monitor and to the "Monitor" connector of the

communication box.

This manual suits for next models

Table of contents

Other TrackWeight Accessories manuals

TrackWeight

TrackWeight SERIES II User manual

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

Panasonic

Panasonic HG-T Series user manual

IFM Electronic

IFM Electronic Efector 250 Series Brief instructions

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual