TP-Link HS200 User manual

Smart Wi-Fi Light Switch Installation

Important Safety Information

Before installing, servicing, or removing the Smart Switch, read and follow all safety precautions

including the following:

• WARNING: RISK OF ELECTRIC SHOCK OR FIRE. Turn OFF power supply at the circuit breaker or

fuse. Use a non-contact voltage tester to ensure the power is off.

• The Smart Switch must be installed and used in accordance with the National Electric Code (NEC)

or your local electrical code. If you are unfamiliar with these codes and requirements, or are

uncomfortable performing the installation, consult a qualified electrician.

• The Smart Switch is an indoor single-pole switch that requires a neutral connection.

• Do not install the Smart Switch with wet hands or when standing on wet or damp surfaces.

1 Download TP-LINK Kasa from App Store or Google Play.

2 Connect mobile device to your 2.4GHz Wi-Fi network.

Apple and App Store are trademarks of

Apple Inc., registered in the U.S. and

other countries.

Android and the Google Play logo are

trademarks of Google Inc.

3 Launch Kasa and follow the wiring steps provided, then connect the

Smart Switch to your home network.

Quick Start Guide

HS200

7106506280 REV 1.0.0

Sketch9:41 AM 100%

Before we start

Have you already wired up your

Smart Switch?

NOT YET

Yes, I have

Create Account

Skip

Forgot password?

Password

Welcome

home

Sketch9:41 AM 100%

Start the con guration

Locate the reset button below the

switch on the left.

Press and hold for 5 seconds until the

Wi-Fi light blinks amber and green.

RESET

scan QR

code

Note: The Smart Switch

only supports 2.4GHz

networks.

If you encounter any issues during installation or configuration, please visit

www.tp-link.com/support for web support and troubleshooting information.

Smart Wi-Fi Light Switch

Troubleshooting

Support

Blinking Amber and Green: App-Config mode initiated.

Green: Successfully connected to the Wi-Fi network.

Blinking Amber: Resetting or during firmware update.

Red: No Wi-Fi connection.

White: Lit up when the light is switched OFF to show the

Smart Switch location in the dark.

Press to reboot the Smart Switch.

Press and hold (about 5 seconds) until the Wi-Fi status LED

blinks amber and green alternately to initiate App-Config

mode.

Press and hold (about 10 seconds) until the Wi-Fi status LED

blinks green rapidly to factory reset the Smart Switch.

1. What should I do when I can’t turn the Smart Switch on/off manually?

If the Smart Switch doesn’t respond when pressing the physical switch:

•Make sure that you restore power to the Smart Switch at the circuit breaker.

•Make sure the Smart Switch is wired correctly. Please consult with a

qualified electrician.

2. What should I do when the Smart Switch won’t respond to commands or

scheduled automations?

•Check your network connectivity.

• Check if the Wi-Fi status LED on the Smart Switch is lit green. If it is amber or

blinking amber and green, reconnect the Smart Switch to your Wi-Fi network.

• Do not use a metal faceplate with the Smart Switch to prevent Wi-Fi signal

interference.

• Power cycle your router and/or reboot the Smart Switch by pressing the

RESTART button underneath the switch.

•Factory reset the Smart Switch by pressing and holding the RESET button.

You’ll need to reconfigure the Smart Switch again.

RESET

RESTART

Other manuals for HS200

Table of contents

Other TP-Link Switch manuals

TP-Link

TP-Link TL-SL2428 User manual

TP-Link

TP-Link JetStream T2600G-28TS User manual

TP-Link

TP-Link T1600G-18TS User manual

TP-Link

TP-Link TL-SG105 User manual

TP-Link

TP-Link JetStream TL-SL3428 User manual

TP-Link

TP-Link TL-SG2216 User manual

TP-Link

TP-Link JetStream TL-SG5412F Instruction Manual

TP-Link

TP-Link TL-SL2210WEB User manual

TP-Link

TP-Link TL-SF1008D User manual

TP-Link

TP-Link TL-SG608E User manual

TP-Link

TP-Link JetStream TL-SG5412F User manual

TP-Link

TP-Link JetStream T3700G-52TQ User manual

TP-Link

TP-Link Tapo H100 User manual

TP-Link

TP-Link TL-SG108-M2 User manual

TP-Link

TP-Link TL-SL5428E User manual

TP-Link

TP-Link Omada DS1018GMP User manual

TP-Link

TP-Link UH400 User manual

TP-Link

TP-Link ES20M User manual

TP-Link

TP-Link TL-SG1016PE User manual

TP-Link

TP-Link KS205 User manual

TP-Link

TP-Link Omada SG3210X-M2 User manual

TP-Link

TP-Link JetStream TL-SL3428 User manual

TP-Link

TP-Link TL-SG3109 User manual

TP-Link

TP-Link TL-SG2216 User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual