TP-Link BetterEnergy User manual

TP-Link

4G LTE Router

User Manual

3 2

Step 1. Position the antennas vertically.

Note: For some Routers you may need to install the

antennas manually first

Step 2. Insert the Sim card into the slot until you hear a click.

Step 3. Turn on the Router.

Step 4. Make sure the Internet LED is on, indicating the router has connected to the

internet successfully. If it is not, please

Note: Images are for demonstration purposes only

Connect the Hardware

Connect your device to the

router (wired or wireless).

The default SSID and password are

printed on the product label at the

bottom of the router.

Enjoy The Internet!

Note: The router can also be used (or configured) in wireless router mode for ADSL/Cable

connections. For more information, please refer to the User Guide at www.tp-link.com.

Customize the 4G LTE Router

Step 1. Make sure your computer is connected to the router (via wired or wireless)

Step 2. Enter http://tplinkmodem.net or 192.168.1.1 in the address bar of a web browser. Based on the

actual web management login page: use the default admin for both username and password or create

a new password to log in.

Step 3. Follow the step-by-step instructions on the Quick Setup page to complete

the initial configuration.

Question 1 - What can I do if the login page does not appear?

• Verify that the computer is set to obtain an IP address automatically from the router.

• Verify that http://tplinkmodem.net or 192.168.1.1 is correctly entered in the web browser.

• Use another web browser and try again.

• Reboot your router and try again.

• Disable and then enable the active network adapter and try again

Question 2 - What can I do if I cannot access the internet?

Verify that your SIM card is an LTE or WCDMA card.

• Verify that your SIM card is in your ISP’s service area.

• Verify that your SIM card has sufficient credit.

• Check the LAN connection: Enter http://tplinkmodem.net or 192.168.1.1 in the address bar of a web

browser. If the login page does not appear, refer to FAQ > Q1 and then try again.

• Check your ISP parameters:

1 Open a web browser and log in to the web management page.

2 Verify the parameters provided by your ISP are correctly entered. If the parameters are

incorrect, create a new profile with the correct parameters.

Note: : For more troubleshooting help, please refer to FAQ on our website: https://www.tp-link.com.

• Check the PIN settings:

1 Open a web browser and log in to the web management page.

2 Verify if PIN is required. If it is, enter the correct PIN provided by your ISP.

• Check the Data Limit:

1 Open a web browser and log in to the web management page.

2 Verify if the total used data exceeds the total allowance. If it does, correct the total

allowance and set the total used data to 0, or disable the data limit.

• Check the Mobile Data:

1 Open a web browser and log in to the web management page.

2 Enable the mobile data to access the internet.

• Check the Data Roaming:

1 Confirm with your ISP if you are in a roaming service area. If you are, open a web browser and

log into the web management page.

2 Enable the data roaming to access the internet.

Question 3. How to restore the router to its factory default settings?

• With the router powered on, press and hold the WPS/RESET button on the rear panel of the router until

the Power LED starts flashing. The router will restore and reboot automatically.

• Log in to the web management page of the router to restore the router to its factory defaults.

Question 4. What can I do if I forget the password of the web management page?

• Refer to FAQ>Q3 to restore the router and use admin for both username and password or create a new

password to log in.

Question 5. What can I do if I forget my wireless network password?

• The default wireless password is printed on the product label of the router.

• If the default wireless password has been changed, log in to the router's web management page and

retrieve or reset your password.

Other TP-Link Network Router manuals

TP-Link

TP-Link Archer C7 Setup guide

TP-Link

TP-Link ARCHER C1200 User manual

TP-Link

TP-Link TL-MR6400 User manual

TP-Link

TP-Link TL-R470T+ User manual

TP-Link

TP-Link Archer C9 User manual

TP-Link

TP-Link Archer BE9300 User manual

TP-Link

TP-Link Hexagon P50 User manual

TP-Link

TP-Link Archer AX95 User manual

TP-Link

TP-Link Archer C6 User manual

TP-Link

TP-Link Archer BE805 User manual

TP-Link

TP-Link Archer C60 AC1350 User manual

TP-Link

TP-Link TL-MR105 V1 User manual

TP-Link

TP-Link TL-WA820RE User manual

TP-Link

TP-Link TL-MR3020 User manual

TP-Link

TP-Link TD-VG5612 User manual

TP-Link

TP-Link TD-W8961ND User manual

TP-Link

TP-Link TW-MR3220 User manual

TP-Link

TP-Link Archer C2300 User manual

TP-Link

TP-Link ARCHER C3150 User manual

TP-Link

TP-Link TL-WR902AC User manual

TP-Link

TP-Link Archer A9 User manual

TP-Link

TP-Link Archer MR600 User manual

TP-Link

TP-Link Archer C2600 User manual

TP-Link

TP-Link Archer C20 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview

LevelOne

LevelOne FBR-1416 user manual