TP-Link TD-8616 User manual

1

Turn off all of your network devices, including your computer and the Modem.

Connect your computer to the

Port labeled “LAN” on the

Modem Router with an

Ethernet cable.

Connect the splitter to the wall

j

ack using a telephone line,

then use the other telephone

line to directly connect it to the

LINE port on the Modem

Router and the MODEM port

of the splitter, also have the

PHONE port of the splitter

connected to a telephone.

2

ADSL: Flashing when the modem

is synchronizing; Solid light if the

modem is synchronized

If no telephone is needed, please connect the LINE port of the Modem to the

wall jack using the telephone line directly.

Turn on all of your network devices, including your computer and the Modem

then check to see if the LEDs of the Modem display normally as the diagram

below describes.

If the LEDs display abnormally, please check to see if all the cable connectors

(power adapter, phone line and Ethernet cable) are well connected to your

device. With the phone line well connected, if the ADSL LED turns off after a

quick-flash, please contact your ISP to ensure that your internet connection is

active.

Note

Note

Power: Solid light

LAN: Solid light if the LAN port is

connected

Plug the provided Power Adapte

r

into the Power jack on the back o

f

the Modem and the other end to a

standard electrical wall socket.

3

Configure your computer’s IP Address

For Windows XP OS

Go to Start > Settings > Control

Panel, and then you will see the

following page.

Click Network and

Internet Connections

Click Properties

Click Network

Connections

Right-click Local Area

Connection

4

Double-click Internet

Protocol (TCP/IP)

Select Use the following

IP address

Enter 192.168.1.2 into the IP

address field, 255.255.255.0

into the Subnet mask filed.

Click OK

5

Click OK

For Windows Vista OS

Go to Start > Settings > Control

Panel, and then you will see the

following page.

Click View Network

Status and Tasks

Click

V

iew Status

6

Click Properties

Double-click Internet Protocol

Version 4

7

Click OK

Click OK

Select Use the following

IP address

Enter 192.168.1.2 into the IP

address field, 255.255.255.0

into the Subnet mask filed.

8

For Windows 7 OS

Go to Start > Settings > Control

Panel, and then you will see the

following page.

Click View network

status and tasks

Click Change adapter settings

Click Properties

Right-click Local Area

Connection

9

Double-click Internet

Protocol Version 4

(TCP/IPv4)

Select Obtain an IP

address automatically

Select Obtain DNS server

address automatically

Click OK

10

Click OK

Login

If you forget the password, please refer to T2 in the Troubleshooting guide.

A dialog box will prompt you fo

r

the User name and Password.

Enter the default values and

click OK.

Note

User nameǖadmin

Passwordǖadmin

The web management page will

display after a successful login.

Open your web browser and

type in 192.168.1.1 in the

address bar and press Enter.

Other manuals for TD-8616

4

Table of contents

Other TP-Link Modem manuals

Popular Modem manuals by other brands

Davicom

Davicom DM562AP Operation manual

EpiValley

EpiValley TATA indicom SXC-1080 user guide

Zte

Zte WiMAX user manual

Intelimax

Intelimax MA-2060 user manual

SMC Networks

SMC Networks D3CM1604V Administrator's manual

Telstra

Telstra Wi-Fi 4G Advanced Pro X user guide

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 user manual

Samsung

Samsung AceLink SAM-335A user guide

Enfora

Enfora Enabler-G Integration guide

iRZ

iRZ ATM2-232 user guide

Zhone

Zhone 6310 installation instructions

Paradyne

Paradyne Hotwire 7976 installation instructions

US Robotics

US Robotics 3453C datasheet

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... user manual

Zte

Zte MF823 user guide

Four-Faith

Four-Faith F1403 user manual

Sierra Wireless

Sierra Wireless AIRLINK MP595W user guide

Gemtek

Gemtek WiMAX WIXFBR-103 user manual