TP-Link TD-8616 User manual
1
Turn off all of your network devices, including your computer and the Modem.
Connect your computer to the
Port labeled “LAN” on the
Modem with an Ethernet cable.
Connect the splitter to the wall
j
ack using a telephone line,
then use the other telephone
line to directly connect it to the
ADSL port on the Modem and
the MODEM port of the
splitter, also have the PHONE
port of the splitter connected
to a telephone.
2
If no telephone is needed, please connect the ADSL port of the Modem to the
wall jack using the telephone line directly.
Turn on all of your network devices, including your computer and the Modem
then check to see if the LEDs of the Modem display normally as the diagram
below describes.
If the LEDs display abnormally, please check to see if all the cable connectors
(power adapter, phone line and Ethernet cable) are well connected to your
device. With the phone line well connected, if the ADSL LED turns off after a
quick-flash, please contact your ISP (Internet Service Provider) to ensure that
your internet connection is active.
Note
Note
Plug the provided Power Adapte
r
into the Power jack on the back o
f
the Modem and the other end to a
standard electrical wall socket.
Power: Solid light
LAN: Solid light if the LAN port is
connected
ADSL: Flashing when the modem
is synchronizing; Solid light if the
modem is synchronized
3
For Windows XP OS
To connect to the Internet, please run the dialing software such as WinPoet
or EnterNet to do the virtual dialing as the following described.
Note
Click the “StartÆAll
ProgramsÆAccessoriesÆ
CommunicationsÆNew
connection wizard” to
launch the wizard.
Click Next
4
Select the “set up my
connection manually”
Select the “connect
to the Internet”
Click Next
Click Next
Select the “connect using
a broadband connection
that requires user name
and password”
Click Next
5
.
Note If you did not get the User name or Password, please contact your ISP fo
r
this information.
Click Finish
Type an ISP Name to
identify your connection
Click Next
Click Next
Enter the User name
and Password given
by your ISP
Add a shortcut to this
connection to my
desktop for convenience
6
For Windows Vista OS
Note The User name and Password displayed here are given by your ISP,
which you have entered during the New Connection Wizard.
A
fter you have successfuly created the
connection, the shortcut icon o
f
this connection will appear on you
r
desktop. When you want to access the
Internet, double-click the icon to
load the following screen.
Click Connect
Click the “StartÆ
Control Panel”
7
Double-click Network
and Sharing Center
Click Set up a
connection or network
Click Next
Click Connect to
the Internet
8
Note The User name and Password displayed here are given by your ISP,
which you have entered on last step.
Click Broadband
(PPPoE)
Click Connect
Click Connect
Type a Connection name
to identify your connection
Enter the User name and
Password given by your ISP
9
For Windows 7 OS
Note To connect to the Internet next time, click the Start button; click Connect to,
and then click the connection you just created.
Click Close to
finish the setup
Click the “StartÆ
Control Panel”
10
Click Network and
Sharing Center
Click Connect to
the Internet
Click Set up a
connection or network
Click Next
Other manuals for TD-8616
4
Table of contents
Other TP-Link Modem manuals
TP-Link
TP-Link TC-7620 User manual
TP-Link
TP-Link TD-W9960v User manual
TP-Link
TP-Link TD-8610 User manual
TP-Link
TP-Link Deco M5 User manual
TP-Link
TP-Link TC-7610 User manual
TP-Link
TP-Link TD-W8980 User guide
TP-Link
TP-Link TD-8810 V5 Quick start guide
TP-Link
TP-Link TD-8610 User manual
TP-Link
TP-Link TD-8610 User manual
TP-Link
TP-Link TC-7610 User manual
TP-Link
TP-Link TD-W8968 User manual
TP-Link
TP-Link TD-8616 User manual
TP-Link
TP-Link TC7650 User manual
TP-Link
TP-Link TC7650 User manual
TP-Link
TP-Link TC7650 User manual
TP-Link
TP-Link TD-8616 User manual
TP-Link
TP-Link TD-W8960N User manual
TP-Link
TP-Link TM-IA5629V User manual
TP-Link
TP-Link TD-W8980 User guide
TP-Link
TP-Link TC-7610 User manual
