Totevision LCD-1900VR User manual

Operating Instructions

Thank you for purchasing this high-resolution multi-scan color monitor.

Please read this guide thoroughly before installation.

FCC RADIO FREQUENCY INTERFERENCE STATEMENT

WARNING: (FOR FCC CERTIFIED MODELS)

This monitor has been tested and found compliant with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide proper protection against harmful

interference to a residential installation. This monitor generates, uses,

and can radiate radio frequency energy. Harmful interference to radio

communication may result if it is not properly installed and used.

However, there is no guarantee that interference will not occur in a

particular installation. If this monitor does cause serious interference

to radio or television reception, resetting the monitor may resolve the

problem. Moreover, users are encouraged to correct interference by

doing one or more of the following:

lReposition or relocate the receiving antenna.

lMove the monitor and the receiver further away from each other.

lConnect the monitor into an outlet on a circuit different from that

to which the receiver is connected.

lConsult your local dealer or a qualified technician.

FCC Warning:

To assure a continued FCC compliance, a user must use a grounded

power supply cord and the provided shielded video interface cable with

bonded ferrite cores. Also, any unauthorized changes or modifications to

this monitor will void the user’s authority to operate this device.

Note: If necessary, shielded interface cables and the A.C. power cord

must be used to meet the emission level limits.

EMI Certification

The Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulation. Cet appareil numerique de

class B respecte toutes les exigences du Reglement sur Ic materiel

brouilleur du Canada.

Safety Precautions

This monitor is manufactured and tested on the principle that the user’s

safety comes first. However, improper use or installation may not only

damage the monitor but endanger the user as well. As a safety

precaution, go over the following WARNINGS carefully before installation,

and keep this guide handy.

Warnings:

lThis monitor should be operated only at the correct power sources

indicated on the label at the rear end of the monitor. If you are unsure

of the power supply in your residence, consult your local dealer or

Electricity Supplier.

lDo not try to repair the monitor yourself, as it contains no

user-serviceable parts. The monitor should only be repaired by a

qualified technician.

lDo not remove the monitor cabinet. There are high-voltage parts

inside that may cause an electric shock even when the power cord

is disconnected.

lStop using the monitor if the cabinet is damaged. Have it checked by

a service technician.

lPut your monitor only in a clean, dry environment. Unplug the monitor

immediately if it gets wet, and consult your service technician.

lAlways unplug the monitor before cleaning it. Clean the cabinet with

a clean, dry cloth. Apply non-ammonia-based cleaner onto the cloth,

not directly onto the glass screen.

lKeep the monitor away from magnetic objects, motors, TV sets, and

transformers.

lDo not place heavy objects on the cable or power cord.

lFor PLUG CABLE EQUIPMENT, the socket outlet should be installed

near the equipment and should be easily accessible.

Care and Maintenance

Care

lAvoid exposing your monitor directly to sunlight or other heat

sources. Place your monitor away from the sun to reduce glare.

lPut your monitor in a well-ventilated area. Do not place anything

heavy on top of your monitor.

lMake certain that your monitor is installed in a clean and

moisture-free area.

lKeep your monitor away from magnets, motors, transformers,

speakers, and TV sets.

Safety Tips

lIf smoke, an abnormal noise or an odor comes out of your monitor,

switch off the power immediately and call our service center.

lNever remove the rear cover of your monitor cabinet. The display

unit inside contains high-voltage parts and may cause an electric

shock.

lNever try to repair the monitor yourself. Always call your service

center or a qualified technician to fix it.

Note: This user’s manual contains graphics and information that is for

reference purposes only and is subject to change without notice.

CHAPTER 1

Introduction

BEFORE INSTALLING YOUR MONITOR

Read this manual cover to cover.

PAY ATTENTION to all WARNING and CAUTIONS

DO NOT use computer components not recommend by the

manufacture

Do not attempt to service the monitor your self. If a problem

occurs, contact the manufacture's authorized service center

ABOUT YOUR MONITOR

This monitor is a microprocessor-controlled, color monitor that

uses a TFT LCD panel. The monitor conforms to EPA Energy

Star and VESA DPMS (Display Power Management Signaling)

power management standards.

RGB MODE

This monitor is equipped with a microprocessor that identifies

your computer 's video mode and allows user to adjust the setting.

VIDEO MODE

This monitor can accept the NTSC or PAL signal to display the video

screen automatically. It also implement the video screen on PC

function, we called PIP function. We alsoprovide one pair of BNC

in/out connector inside.

FACTORY-PRESET MODES

Table 1 shows standard video mode setting that has been

pre-adjusted at the factory for accurate video display. These setting

are stored in the monitor's memory

Table 1. Factory-Preset Modes

PC mode

Mode Resolution H-Freq.(KHz) V-Freq(Hz)

NEC 640x400 24.83 56.4

VGA 640x350

720x400

640x480

31.47

37.86

37.5

SVGA 800x600

800x600

35.16

37.88

48.08

46.87

56.3

60.3

72.2

XGA

1024x768

48.36

56.47

SXGA 1280x1024

1280x1024 63.98

80 60

Macintosh 640x480

832x624

1024x768

49.7

48.78

60.241

66.7

74.55

74.927

Video Mode

NTSC 525 lines, 60 fields

PAL 625 lines, 50/60 fields

lLCD-1900VR19” LCD 8U Rack Display Monitor

Overall Dimension (HxWxD): 394.5 x 436 x 62 mm

Effective Display area (H/V): 376.32 x 301.56 mm

Display colors: 16.7M colors

Scan Frequencies:

Horizontal 31.47K to 80KHz

Vertical 60Hz to 75Hz

Number of Pixels: 1280x1024 pixels

Pixel pitch:0.294x0.294 mm

Picture Tube: 19" TFT LCD panel

Power:

Input 110-240VAC(auto-sensing)

Frequency: 48-62Hz

Consumption 45Watts maximum (on)

3 Watts (Power saving off mode)

PC RGB Connector: 15pin Mini D-sub (Standard)

Audio connector 1 x stereo input

Speaker 2W x 2

RGB Signals:

Video Analog RGB 0.7Vp-p/75Ω

Sync Separate

Display Data Channel:

Compatibility VESA DDC 1/2B

Video connector input

S-connector x 1 (S-Video In)

AV connector x 3 (one for Composite Video

Two for audio left/right)

Mini D type x 1 (for YcbCr/Component In)

BNC connector x 1 (Composite Video In)

Video connector output

BNC connector x 1 (Composite Video Out)

Operations:

User Controls On/Off Power Button,

+/-and Up/down keys

On Screen Display Auto adjustment, Brightness, contrast

color temperature, Hue, Tint,

Source select, PIP setup

H-position, V-position, OSD position

Audio volume, bass, treble, mute

Load default

Control Type: Digital

Compatibility: IBM and compatible, Apple

Macintosh, NEC

Environmental Limits:

Operating Temp 32°to 103°F ( 0°to 40°C )

Storage Temp. -4°to 140°F ( -20°to 60°C )

Operating Humidity 10 to 85% without Condensation

Storage Humidity 10 to 95% without Condensation

Agency Approval

EMI FCC-B and CE

Emissions MPR-II

Energy Saving EPA energy star, VESA DPMS

Safety UL, TUV

Chapter 2

PRODUCT PACKAGE

Open the shipping carton and check the contents. If any items are

missing or damaged, contact your dealer immediately.

The package should include the following items

lAnalog Color TFT LCD Monitor

lAccessory Box:

1. VGA cable x 1

2. AC to DC adapter x 1

3. Power Cord x 1

4. User’s manual/Warranty Card x 1

5. Audio cable x 1

6. Mini DIN/RCA cable (for Component Video In use)

INSTALLING THE MONITOR

The monitor is equipped with an auto sensing power supply for

voltage ranges from 110~240VAC, 60/50Hz. Confirm the line voltage

designation on the rear panel of the monitor.

Audio out

DC power Jack

DGB In

YcbCr Component

S video

AV1

Audio R/L

BNC In

BNC out

Table of contents

Other Totevision Monitor manuals

Totevision

Totevision LCD-1700V User manual

Totevision

Totevision LCD-801 User manual

Totevision

Totevision LCD-840VL User manual

Totevision

Totevision LCD-800L User manual

Totevision

Totevision LCD-2300HD User manual

Totevision

Totevision LCD-703HD1 User manual

Totevision

Totevision LCD-800 User manual

Totevision

Totevision LCD-3700HD User manual

Totevision

Totevision LCD-900HDT User manual

Totevision

Totevision LCD-1700VRZ User manual

Totevision

Totevision LCD-1042VB User manual

Totevision

Totevision LCD-1700VR User manual

Totevision

Totevision LCD-800 User manual

Totevision

Totevision LCD-841D User manual

Totevision

Totevision LCD-3200HD User manual

Totevision

Totevision LCD-840D User manual

Totevision

Totevision LCD-703HDA User manual

Totevision

Totevision LCD-2001VB User manual

Totevision

Totevision LCD-1411TC User manual

Totevision

Totevision LCD-702 User manual

Totevision

Totevision LCD-641V User manual

Totevision

Totevision LCD-1510V User manual

Totevision

Totevision LCD-400X4 User manual

Totevision

Totevision LCD-1042TS Manual

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual