Totevision LCD-1042VB User manual

TFT LCD COLOR MONITOR

User’s manual

Model: LCD-1042VB 10.4”

Model: LCD-1211VB 12.1”

Model: LCD-1512VB 15.1”

1319 DEXTER AVE N, STE 020

SEATTLE, WA 98109

TEL:206/623-6000

FAX:206/623-6609

Thank you for Purchasing this ToteVision product.

Before attempting to operate your video Monitor,

please carefully read this manual.

Content

1. Precautions

2. Package contents

3. Location of Controls

4. Monitor Use

5. Cleaning instructions

6. Adjust the monitor

7. Specifications

Item\Model LCD-1042 LCD-1211 LCD-1512

Display 10.4TFT 12.1TFT 15.1TFT

Back light 2 CCFL Type L 8 CCFL 12 CCFL

Input Signal VGA/NTSC/PAL(dual capability)

Dot Format 1024×768 800×600 1024×768

Dot Pitch 0.33mm 0.3075mm 0.297mm

Brightness rating 1300cd/m21250cd/m21700cd/m2

Number of Pixels 307,200dots 480,000dots 786,432dots

Pixel Configuration Stripe Stripe Stripe

View Angle ±80(H),±80(V) ±75(H),±75(V) ±80(H),±80(V)

Input signal Level 1.0V P-P(Positive) 750hm

Dimensions(mm) 340 x228x54.2

338×278×59.3 389×317×52.1

Operation Temperature 41~104℉or 5~40℃

DC power requirement

for car

Regulated 12VDC, 3.5A, negative ground

PART no. DC-1500 required

Power consumption 30W 25W 52.5W

Connections VGA IN jack, RCA video IN jack, S-video jack,

Weights 3.15kg 2.97kg 3.92kg

Colors 262,144 262,144 16.7M

969 Thomas street, Seattle WA98109

Tel: 206-623-6000 Fax: 206-623-6609

E-mail: [email protected]

http://www.accessone.com/~tote

1. PRECAUTIONS

-This unit has been engineered and made to assure your personal

safety; however, improper use may cause potential electrical shock

and fire hazard.

-For safety do not watch or operate the monitor while driving.

-Do not use this monitor near water such as bathtub, washbowl,

kitchen sink, laundry tub, in a wet basement, or a swimming pool.

-If the liquid has been spilled into the monitor, unplug the monitor from

the DC jack and refer to qualified service personnel for serving.

-Do not open the monitor. There are no uses service components

inside.

-Use only Totevision approved accessories with this unit.

-Do not expose to extreme hot or cold temperature.

(Storage temp. range: -10 ~+50 )℃℃

(Operating temp. range: 5 ~40 )℃℃

-When using a DC car cord (optional), be sure to use Totevision

standard car cord, and always turn the power switch off before

starting or stopping the vehicle.

2. Package Contents

A. LCD monitor

B. AC Adapter

3. Location of Controls

10.4” Front View

10.4” Rear View

10.4” Vesa View

7. SPECIFICATION:

zOn screen display for: brightness, contrast, back light, hue & Tint

zS-video capability

zSunlight readable Very High Brightness LCD panel

zFor color applications

zWide viewing angle

zHigh contrast ratio

zActive matrix technology eliminates distortion

Miscellaneous：

Signal Source：To choice signal for D-SUB、CVBS or S-VIDEO.

Mode Select：To choice mode by 640x400 or 720x400.

Reset：Select this function can make the monitor have the best

efficiency.

Volume：Without audio function.

EXIT OSD：Exit the OSD function selection main menu.

Note：You don’t need to use AUTO CONFIG function when in the

VIDEO IN mode.

12.1” Front View

12.1” Rear View

15.1” Front View

15.1” Rear View

Function：

AutoAdjust：Select this function can make the monitor have

the best efficiency.

Auto Colour：Select this function can make the color have the

best efficiency.

OSD Menu：

Language：There are 8 type languages can be selected.

OSD H. Position：Pressing ＋moves the OSD menu to right;

Pressing －moves the OSD menu to left.

OSD V. Position：Pressing ＋moves the OSD menu upward;

Pressing －moves the OSD menu downward.

OSD Timer：To choice on or off the OSD list timer.

Translucent：To choice on or off the OSD list translucent.

OSD

Colour：

Contrast：Adjust the contrast using ＋and －buttons.

Brightness：Adjust the brightness using ＋and －buttons.

Colour Adjust：

9300：set current color temperature as 9300K.

6500：set current color temperature as 6500K.

USER：

RED Color：Red range.

GREENColor：Green Range.

BLUEColor：Blue Range.

Picture：

H POSITION：Pressing ＋moves the display image to right;

Pressing －moves the display image to left.

V POSITION：Pressing ＋moves the display image upward;

Pressing －moves the display image downward.

Sharpness：Adjust the sharpness using ＋and －buttons.

Phase：Adjust input video sampling clock’s phase using ＋and

－buttons.

CLOCK：Adjust input video sampling clock using ＋and －

buttons.

4. Monitor use

a. Make sure your video source ( CCD CAMERA,VTR, e.t.c.)

power is on

b. Connect your video source to video input (VGA, RCA video

or S-video)

c. Push the Power Switch ON

5. Cleaning instructions

Turn off the monitor before cleaning the LCD screen. Use a Slightly

damp (not wet) cloth.

Do not use an aerosol spray directly on the LCD screen because

over-spray may cause electrical shock.

6. Adjusting the monitor

Control Button

1.Power Switch：Pressing this button turns the display system power

onoroff.

2.Power LED：This Power LED indicates different status when this

unit operates in different modes. It shows the orange

color in standby mode and it shows the green color in

power-on mode.

3.Decrease (－)：This button is used to select OSD control option and

to adjust the decreasing value of selected OSD

controloption.

4.Menu / Enter：Pressing this button pops up the menus on the screen,

and used to select the control options on the screen.

5.Increase (＋)：This button is used to select OSD control option and

to adjust the increasing value of selected OSD

controloption.

Power

Switch Power

LED Menu / Enter

Decrease

( - ) Increase

( + )

Inputs Diagram

【1】【2】【3】【4】

【1】DC IN：This is for connecting the power cable.

【2】RGB ANALOG IN：This can be connected with the D-Sub 15 pin

signal connector.

【3】COMPOSITE VIDEO：This can be connected to the composite

video-out connector of any video resource.

【4】S-VIDEO：This can be connected to the S-video-out connector

of any video resource.

Other manuals for LCD-1042VB

This manual suits for next models

Table of contents

Other Totevision Monitor manuals

Totevision

Totevision LCD-1900V User manual

Totevision

Totevision LCD-400X4 User manual

Totevision

Totevision LCD-1900V User manual

Totevision

Totevision LCD-703HD User manual

Totevision

Totevision LCD-1901HDL User manual

Totevision

Totevision LCD-1044TC User manual

Totevision

Totevision LCD-1042TS Manual

Totevision

Totevision LCD-1048HD User manual

Totevision

Totevision LCD-702 User manual

Totevision

Totevision LCD-1411TC User manual

Totevision

Totevision LCD-1047HD User manual

Totevision

Totevision LCD-1042TS User manual

Totevision

Totevision LCD-1900VR User manual

Totevision

Totevision LCD-800 User manual

Totevision

Totevision LCD-1042VB User manual

Totevision

Totevision LCD-3700HD User manual

Totevision

Totevision LCD-501 User manual

Totevision

Totevision LCD-900HDT User manual

Totevision

Totevision LCD-1900V User manual

Totevision

Totevision LCD-640 User manual

Totevision

Totevision LCD-2600HD User manual

Totevision

Totevision LCD-641V User manual

Totevision

Totevision LCD-2300HD User manual

Totevision

Totevision LCD-1700V User manual

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual