Torrey QC Series User manual
OWNER`S MANUAL
ELECTRONIC SCALE
REV 1 CODE: 13100885
BEFORE OPERATING THIS SCALE, PLEASE READ THIS MANUAL THOROUGHLY.
QC-SERIES
REV 1 CODE: 13100885
2QC SERIES
INDEX
IMPORTANT WARNINGS 3
INTRODUCTION 5
INSTRUCTIONS FOR INSTALLATION 5
NAME AND LOCATION OF IMPORTANT PARTS 6
* KEYBOARD 6
•DISPLAY SECTION 8
•COUNTING FUNCTIONS 8
* TARE/ZERO KEY FUNCTION 8
* EASY OPERATION 10
1.COUNT MODE 10
2.SAMPLE MODE 10
* INTERMITTENT INDICATOR 11
TABLE OF MAXIMUM ERRORS 12
* UNIT WEIGHT MEMORIES 13
* HOW TO STORE UNIT WEIGHT MEMORIES 13
* HOW TO RECALL UNIT WEIGHT MEMORIES 13
* HOW TO ACUMULATE PIECES 13
* HOW TO SEE THE TOTAL COUNT 14
* HOW TO ERASE THE TOTAL COUNT 14
* OPERATION WITH Kg AND Lb 14
* PRINTING 14
IMPORTANT SCALE MESSAGES 15
CALIBRATION 15
SELECTION TABLE OF MINIMUM EXTERNAL DIVISION 18
MAINTENANCE AND CLEANING 18
RECOMMENDATIONS 19
TECHNICAL SPECIFICATIONS 20
.ADDITIONAL DATA 23
IMPORTANT WARNINGS
Counting scale
1. In case have problema wiht the scale,
firts read the warranty condiction.
2. Do not open the scale on your own.
Your warranty will be canceled.
3. Never prees the keyboard wiht object
such as pencils, pens, knifes, etc.
4. Use a Vac outlet exclusive for the
scale. Avoiding overload or voltaje
variations.
5. Never wash the scale using a flow of
wáter. This can damage the electronic
components. For more information read
“Maintenance and cleaning”section.
6. Protect the scale from insects (mainly
from roaches), they can seriously
damage to electronic components. Use
solid products againts roaches.
7. Do not drop or hit the scale wiht nthe
product to be weighted because as time
goes by it will damage the weight
sensor.
3
8. Do not use solvents or detergents for
cleaning only use damp rage.
9. Do not place fans or heaters directed
towards the scale.
10. Do not place the scale where there is a lot of
moisture and/or dust.
11. Only autorized and qualified personnel should
check and repair your scale.
IMPORTANT WARNINGS
4
WARNING!
Do not open the scale
Caution: to reduce the risk of short circuit in your
scale, do not remove the cover or sustitute any of
the parts for others that are not original only
authorized distributor..
Battery should be recharged for 10Hrs before
using the scale for the first time.
IMPORTANT!
QC SERIES
INTRDOCUTION
5
Dear customer:
We appreciate you have chosen this product and we assure you will get the
maximum satisfaction of the new acquisition for your business.
We suggest to read carefully this manual and make sure to keep it at hand
for later consultations.
INTRUCTIONS FOR INSTALLTION
1.Unpack the scale and check the conditions of
the product. If it is damaged report it immediately
to your authorized distributor.
2.-Place the scale where there is not any movement
or vibration. Make sure it is leveled adequately.
3.-Connect the AC/DC power supply to 120 or 220 vac outl et
And plug in the jack onto the scale
4.-Turn the scale on and wait until the countdown
Sequence will display zeros, after that it will be
Ready to use.
Counting scale
NAME AND LOCATION OF IMPORTANT PARTS
6
Keys: press the key to turn the scale on and the
key to turn the scale off
Keys: it is used to enter data such as unit weight or quantity
1.
2.
3. Key: it is used to enter the number zero.
4. Key: it is used to clear data.
5. Key : it is used to enter a decimal po int to the unit weight.
METROLOGICAL FUNCTIONS
6. Key : it is used to make zero any weight on the scale.
7.. Key : it is used to tare the weight of recipients on the scale.
8. Key : it is used to enter tare.
9. Key : it is used to switch between kg. - lb.
10.It is used to print the weight,the unit weight and the
amount of pieces.
Key :
11.. Key : it is used to store unit weights .
NUMERIC SECTION
QC SERIES
12.
13.
14.
15.
16.
17.. Key: it used to recall a saved tare wieght from a memory.
18.
19.
20.
21..
UNIT WEIGHT FUNCTIONS
Key : it is used to recall a previously stored unit weight.
Key : it activates the sample mode and gets the unit weight.
Key : it is used to enter the unit weight using the numeric
section.
Key : it is used to enter a manualy tare weight.
Key: it activates the counting mode
MEMORY MANAGEMENT
Key: it is used to add pieces to the total count.
Key: it is used to see the total count.
Key: it is used to erase the total count.
Key: It is used to turn the backlight on /off.
7
Counting scale
DISPLAY SECTION
2. Unit weight section: it shows the
unit weight.
1. Weight section: it shows the
weight of the product.
3. Units section: it shows the unit of
measure: kg, lb
4. COUNT pcs. Section: : it shows the
quantity of pieces inside of the
container.
5. Zero indicator: it indicates zero
weight.
6. Ac indicator: it indicates when the
scale is connected to a power
supplier.
COUNTING FUNCTIONS
TARE/ZERO KEY FUNCTION
1.- Reference to zero: it is possible that without having any weight over
the plate, the scale shows a number on the display due to voltage
variance or some other factor. When this happened, just press the key
and the weight indicator will return to zeros. The zero word appears in the
upper right indicator, this operation is the reset to zero.
Tare: this function is used when you wish to weight a product in a
container but you do not want to consider the containers weight during
the operation. To use this function follow steps: suppose you are going to
weight 150 gr. of some product in a plastic container that weighs 350 gr.
1. place the empty container on the scale.
8QC SERIES
2. Press the key. after some seconds the display will shows the
following:
3..Put the product inside of the container and the scale shows only the
products weight without the containers weight, when removing the container
will appear the negative weight.
If you finish weighting and you want to get out of this function, only press
the key, the scale will return to zero.
It is important to mention that this function is substractive from the scale´s
maximum capacity. for example, if you have a container that weights 350 gr.,
the scale will only be able to weight up to 19.650 kg.of product to complete
the maximum capacity. (20 kg).
9
Counting scale
Other manuals for QC Series
1
This manual suits for next models
3
Table of contents
Other Torrey Scale manuals
Torrey
Torrey WLS User manual
Torrey
Torrey W-LABEL Series User manual
Torrey
Torrey L-EQ 5/10 User manual
Torrey
Torrey LSQ Series Owner's manual
Torrey
Torrey LSQ Series User manual
Torrey
Torrey CRS-HD 200 User manual
Torrey
Torrey EQB-50/100 User manual
Torrey
Torrey PS Series User manual
Torrey
Torrey LSQ-40L Instruction manual
Torrey
Torrey EQB Series User manual
Torrey
Torrey EQB-W Series User manual
Torrey
Torrey CRS Series User manual
Torrey
Torrey PC Series User manual
Torrey
Torrey L-EQ HS Series User manual
Torrey
Torrey PPC Series User manual
Torrey
Torrey W-LABEL 40L User manual
Torrey
Torrey LSQ Series User manual
Torrey
Torrey L-PC SERIES User manual
Torrey
Torrey FS 250/500 User manual
Torrey
Torrey PC HSP Series User manual
