TorcUP TX LINK Series Operating manual
Maintenance
Supplies
1. TX Link 2. Marine moly 3. 5/32” allen wrench 4. 3/16” allen wrench
1.
2.
3.
4.
Detach ratchet link from cylinder.
Remove 1st lower spacer screw
using 3/16” allen wrench
Remove 2nd lower
spacer screw using 3/16”
allen wrench
Remove 1st upper
spacer screw using
5/32” allen wrench
Remove 2nd upper
spacer screw
using 5/32”
allen wrench
Remove ratchet link sideplate
Remove ratchet link sideplate
Image shown illustrates
factory assembly using
Mobil 1 synthetic grease
Remove ratchet, drive plate
and drive segment
Slide ratchet
from drive
plate
Be aware of tension on segment spring
to prohibit spring ejection
Table of contents
Other TorcUP Power Tools manuals
TorcUP
TorcUP TXU Series User manual
TorcUP
TorcUP RAPTOR RP Series Setup guide
TorcUP
TorcUP RP-500 User manual
TorcUP
TorcUP VOLTA VT Series User manual
TorcUP
TorcUP SR Series User manual
TorcUP
TorcUP TU-2 User manual
TorcUP
TorcUP TXU-2 User manual
TorcUP
TorcUP ULTRA series Manual
TorcUP
TorcUP TU Series User manual
TorcUP
TorcUP VT Series User manual
