TorcUP RAPTOR RP Series Setup guide
Repair Instructions
2nd Stage Raptor Replacement
Tools required:
3/16 inch allen wrench, pliers & bin for balls
Remove ball plug with allen wrench
Showing plug removed
Place Raptor over bin so balls will drop into bin
Write here
Rotate annulus alternately counter clockwise
allowing balls to drop out
•G:\Raptor_BreakApart\expor\Raptor_Asse
mble (10).jpg
Write here
Showing a ball dropping out
Write here
Continue turning until all balls are out and annulus
comes from motor
Write here
Pull apart gearbox from motor and check to ensure
gears are in gear housing as shown
Write here
Use socket to position gearbox vertically for stability
Table of contents
Other TorcUP Power Tools manuals
TorcUP
TorcUP TXU-2 User manual
TorcUP
TorcUP SR Series User manual
TorcUP
TorcUP TX LINK Series Operating manual
TorcUP
TorcUP TX Series User manual
TorcUP
TorcUP TU Series User manual
TorcUP
TorcUP VT Series User manual
TorcUP
TorcUP RP-500 User manual
TorcUP
TorcUP TXU Series User manual
TorcUP
TorcUP VOLTA VT Series User manual
TorcUP
TorcUP TU-2 User manual
