- 9 -
(1) Zero function
Use to correct drifted zero value when the scale is unloaded, and motion is
not detected. This function works when ZERO KEY is pressed, and the
ZERO LAMP is on.
(2) Setting tare weight function.
Press the TARE KEY. Then, the scale will memorize the weight of the tare
and will display zero value ‘0’kg. The TARE LAMP will be on.
To escape this function, remove everything from the scale, and press the
TARE or ZERO KEY.
Then, the TARE LAMP will be off and this function is terminated.
(3) Hold function
Automatic hold function
■ Press HOLD KEY when the scale is empty (Initial zero state).
■ The weight display will indicate AH ON. HOLD LAMP is on.
■ After loading a thing, if the weight turns stable then, a display shows -----
and average weight will appear.
■ The weight of a loaded thing is displayed.
■ To escape the automatic hold mode, when zero point is on, press HOLD
KEY.
Then, the message of AHOFF is displayed and HOLD LAMP is off and
normal weighing mode is reverted.
Manual hold function
■ Press HOLD KEY loading a thing.
■ This message of HOLD is displayed and sequentially the message of -----
is shown with appearing the average weight.
■ The weight of a loaded thing is displayed.
■ To escape the manual hold mode, remove everything from a hook, or
press the HOLD KEY. Then, HOLD LAMP will be off and the scale
changes from a hold mode to a normal mode.
