B, Charging for your mobile phone with MP2600
1. You can use attached the USB to Micro USB cable to charge mobile phone from the
USB output port. After connect to your mobile phone and press the Power ON push
button. The capacity indicated LED will light on to show the capacity status. The
MP2600 will start charging your mobile phone at same time. The iphone can be
charged into 65% capacity / ipad can be charged into 15% capacity within one hour
from MP2600’s USB output port by Apple original 30pin connector cable.
2. The capacity indicated LED will display different color according to the remaining
capacity.
a) 100 ~ 10% capacity : blue color
b) Below 10% capacity : orange color. You should charge for MP2600
in time.
3. Troubleshooting
Please use the following steps if MP2600 can not charge for your device.
１．Verify that MP2600 has been completely charged.
２．Check that USB charging cable is connected well with MP2600 main body..
３．Check your the digital device is installed the battery（Some digital device can not work if not
installed battery）
４．Check whether your digital device is designed with charging input voltage limited circuit, if so,
MP2600 maybe can not charge and power for the device.
4. Warranty
Your MP2600 is guaranteed against original defects in materials, manufacture and
workmanship for one year from the date of purchase.
5. Notes
Purchase invoices, warranty certificate and complete product composition is that you get the
standard service vendors, including product warranty rights of the certificate, please keep
well．In order to provide the warranty service, please be sure to show the relevant documents. If
you can not get a valid product warranty information, the company will not provide the
standard services of company.
